I can't get my flash drive to open and he tells me to reformat (which means I'm losing all my data, right?)

Similar Questions

• How can I get my flash drive to work? When I install, Windows does not recognize it. In addition, I can't run windows updates and my Install.exe is not responding

  Since I installed Norton I had problems with my computer. I uninstalled it to see if anything works. No luck.

  Since I installed Norton I had problems with my computer. I uninstalled it to see if anything works. No luck.

  Try this. First of all, download and run the utility to remove Norton from the link below.

  Norton removal tool. (click on your version of norton to download the tool).

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=20080710133834EN&product=home&PVID=f-home&version=1&LG=en&CT=us

  Then reinsert your USB key after a few reboots to see if it is recognized. If this is not the case, refer to the procedure described in the link below.

  USB drive not recognized xp.

  http://support.Microsoft.com/kb/925196

  Also, click on Start, run, type ""services.msc ' in the Run dialog box. " Click on 'ok '. Scroll down to "Background Intelligent service". "" Right-click on the service and select Properties. The service is in the started state? If this is not the case, click the button to start the service and the value manual starttype.

  Regarding Windows Update problem, first check your level of service pack for xp by clicking Start, run and type of dialog box running 'winver '. If your service pack is sp3, skip this step and try to reset the windows update components. Refer to the link below to get the procedure.

  http://support.Microsoft.com/kb/971058

  If you don't have XP SP3 installed, you can download and install from the link provided below.

  Windows XP SP3

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  If have any questions, post here on this thread. Good luck.

• How can I use a flash drive with my ipad pro

  I want to buy an ipad pro for school, but I will need an adapter to plug in my flash drive. I was wondering if I would be able to buy an adapter that I can use for a flash drive.

  You can buy a control usb3 adapter, but can connect a USB fat32 and you can import photos because there is no file browser.  Flash player cannot be connected or sick... instead of you can only buy western digital my passport wireless hard drive to keep your files and my cloud app works very well with the ipad pro

• How can I start my Flash DRIVE Toshiba Satellite m40x?

  Hello.

  How can I start my Flash DRIVE Toshiba Satellite m40x?
  In my BIOS is not be option - boot from usb.

  Help, please.

  Hello

  As far as I know is not possible. Sorry but there is nothing to do.

  Good bye

• Can't get my floppy drive to save a disk error: disk is not rewritable.

  Original title: FLOPPY ERROR.

  I can't get my floppy drive to save on a disk, I get the error message saying disc one is not rewritable. I use it for embroidery

  how you're framing your question and the answer

  is a little hard to follow.

  is this correct: you have a machine that you insert a floppy disk in

  that you set up with data on a computer.

  the machine cannot write to the diskette or the computer cannot write

  on the floppy?

  or what?

• I can't get my hard drive to recognize that I have a CD in the tray

  I can't get my hard drive to recognize that I have a CD in the tray.  I can only open and view those that I already copied. Why?

  There are a number of possibilities here.

  1. assuming you have tried several different blank CD (if you are fairly confident that the problem is not the media), it is possible that the laser "burning" the recordable CD is dead. Because this isn't the same laser that reads the CD, you can always read but not write.  If this is the case, the only solution is to buy a new CD player (not expensive).

  2. your CD drive (E :) shows when you click on my computer?  I think it does, or you did that you can open and view copies of files, you have already copied to other CD.

  3. open Device Manager (start > run > devmgmt.msc > OK)

  • Expand the category of CD-ROM/DVD-ROM readers by clicking on the + sign to the left
  • Y at - it a warning next to the entrance icon?
  • Double-click the entry for your CD player
  1. That said under the "device status".
  2. What would you say (at the bottom) under "use of the device.
  • Close the Properties window and Device Manager

  4. open my computer, right-click on the icon for your CD drive and select Properties

  • Is there a tab "recording"?
  • If there is a 'Recording' tab, click on it.  Is the box to "Enable the writing of CD on this drive" checked or unchecked?  (Do not change at this stage)

  I'm not very familiar with Media Center Edition.  In the past, when you copy files to a CD, how did you do?  You just drag files to the letter of the CD-ROM drive in Windows Explorer, or did you have to open an app?  If the latter, what application you use to copy files to a CD.

• How can I get adobe flash on another user? Don't forget that I'm not that computer!

  I can't get adobe flash or microsoft word on the other user. I tried to make the other user admin. but that doesn't work anymore... Help

  Hello

  I suggest you to see link below and check if it helps.

  Method 1: Download and install Adobe Flash Player (Internet Explorer): http://kb2.adobe.com/cps/191/tn_19166.html?promoid=DTEGP#main_DownloadInstall

  For your reference: Adobe Flash Player installation issues

  http://kb2.Adobe.com/CPS/191/tn_19166.html?promoid=DTEGP

  Method 2: Also I suggest you to see the link below, which will help you install Microsoft Office.

  http://Office.Microsoft.com/en-us/try/

  If the problem persists then try contacting support Microsoft Office using the link below.

  http://Office.Microsoft.com/en-us/support-FX101825174.aspx?CTT=97

  Hope this information is useful.

• How can I get a boot drive for windows vista

  How can I get a boot drive for windows vista

  Hello

  Here's how to do a startup, vista etc disc repair

  It is NOT a reinstall drive

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  How to reinstall Vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Pavilion 15-ac027tx: I can't get the graphics driver amd

  I can't get the graphics driver amd please help me to download

  I tried a lot of things to download this driver in hp drivers website.but it gives 404 not found...

  Please help me...

  Hello @NagaNatarajan,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I understand that you are a problem downloading AMD drivers on the HP site and that he wanted to help you!

  Unfortunately, the drivers you are looking for is not available at this time.  Try uninstalling your current graphic drivers in Device Manager.  Then click on the option to Update driver , let me know how it goes.  Please consult the following resources to help you, if necessary: update a hardware driver that is not working properly

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Have a great day!

• Drive mapping: How can I get my external drive be mapped to F: (as he was once) rather than g: which is what happens when I turn on now.

  How can I get my external drive be mapped to F: (as he was once) rather than g: which is what happens when I turn on now.  I tried to unplug and power, reboot etc.  There is no F: drive connected to the computer.

  Go to start / Control Panel / administrative tools / computer management / "disk management and select external reader by clicking on it and then right-click on it and select change drive letter and paths."  It should show the letter currently assigned (G I guess).  Click the button change.  To the right will be a drop of drive letters box.  Go ahead and select F and click on OK.  That should do it. If F is not available, then it is used by the system for something else.  Check disk management to see if you can find it.  If it is not, and is not available in the list, I'm afraid, you will not be able to change until find you what is using drive letter F and remove it, or change it to something else.

  I hope this helps.  If this isn't the case, after return and we will try to understand what is using F or why it is not available.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I am running virtual xp on a Windows 7 system, but I can't get cursor flashing at the command prompt... help?

  I am running virtual XP on a Windows 7 system, but I can't get cursor flashing at the command prompt... help?    I studied the orders autoexe.bat, command.exe and cmd.exe, son and so on.  However, nothing seems to work.

  Hi Bernard,.

  Given that the question relates to the virtual XP, which is outside the boundary of support. I would ask to view the query in the TechNet forums for assistance.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itprovirt

  Please come back if you have problems with Windows.

  Thank you.

• Installing Windows said "we have found no disk drives. How can I get a storage driver?

  My hard drives of computers were completely destroyed by overhead sprinklers during a fire. Installing Windows said "we have found no disk drives. How can I get a storage driver? I can't go online until I have install windows. Thank you

  Hello

  So it does not start from the disc, but when you get to the part where it asks me to choose a disk to install Windows, you do not see something here, is that correct? Go to the menu of the Bios (tap button "F2" at startup to access the Bios), then Advanced and check what you show for the SATA/operating Mode option.

• where can I get the printer driver for canon lbp2900 printer. I'm running Windows 7 on a HP Pavilion PC

  where can I get the printer driver for canon lbp2900 printer.  I'm running Windows 7 on a HP Pavilion PC.  Windows Update does not list a driver for LBP2900 printr

  A quick google found this - http://software.canon-europe.com/products/0010177.asp perhaps?

  I have not tried, I don't have the printer.

  Its usually best to ask the manufacturer of the device for its pilots in the first instance.

• I can't get Adobe Flash Player to work on my PC. I feel I have tried everything. How to make this work?

  How can I get Adobe Flash player to work on my PC?

  First of all, try to enable Active Scripting in the areas of Sites Internet Options, security settings, trust.

  You should also add a corrupted on.

  Click Start, type: Internet Options

  Press enter

  Select the "Advanced" tab

  Under reset Internet Explorer settings, click "reset".

  This should restore the Internet Explorer default settings.

  Then reinstall Flash Player

  http://get.Adobe.com/flashplayer/

  ----------

  Flash Player

  Troubleshoot installation of Flash Player for Windows

  http://kb2.Adobe.com/CPS/191/tn_19166.html

  Troubleshooting player stability and performance

  http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.html

  Uninstaller

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Flash Player Support Forum

  http://forums.Adobe.com/community/webplayers/flash_player

• How can I get a twain driver for CS5 for Windows 7?

  How can I get a twain driver for CS5 for Windows 7?

  Since you have photoshop cs5 in the x 86 program files, then you have the 32 and 64 bit versions of photoshop cs5 installed.

  the 64-bit version of photoshop cs5 is in

  C:\Program Files\Adobe\Adobe Photoshop CS5 (64 bit)

  and the 32-bit version is in

  C:\Program Files (x 86) \Adobe\Adobe Photoshop CS5

  
  

  
  

  If you have not changed anything in the menu programs, while two versions of photoshop cs5 should be included under Start > all programs

  
  

  
  

  Photoshop CS5 is the 32-bit version

  
  

  Photoshop CS5 (64 bit) is the 64-bit version

  
  

  You put the Twain plugin in Win32 folder from the link listed in the #1 message in the Photoshop CS5 32 bit Plug-Ins > import file

  C:\Program Files (x 86) \Adobe\Adobe Photoshop CS5\Plug-ins\Import-Export

  TWAIN plug-ins | Photoshop CS4, CS5, CS6

  VueScan that mentions Ronald Keller is also a good option if you do not want to be restricted to the use of the 32-bit version of photoshop cs5 to scan in photoshop.

  
  

  Scanner VueScan for Windows, Mac OS X and Linux software

  
  

  
  

  Photoshop cs5 should also be able to use WIA support for your scanner.

  It would be under the file > importantmenu t in photoshop cs5 after you have your scanner is connected and turned on