Unexpected error message search

Similar Questions

• I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP.  Any ideas.  Tried the factory returned. He was knocked offline when someone dug into the telco cables.

  I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2

  It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility.  Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it.  My VPN works much better without AirPort Express connected.

  Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.

  If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.

  As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.

  But it's your call.

• "Unexpected error" message when running Extension

  When I try to run an Extension in Photos (DxO OpticsPro) I get the message "Cannot edit with DxO OpticsPro for Photos".  The message reads, "an unexpected error has occurred." Can someone please help with this?

  ... The error does not appear for all the photos I try to open.  Only for one so far...

• Impossible to reinstall AVG after restoring the system, error message "search DNSSERVER order (failed).

  Original title: The failed messages system problems

  Tried to reinstall AVG Internet Security after that system restore and now I can't install it.  I got the error message and when I checked for problems that help control (failure) research saysDNSSERVER?  I also had a message that failed on a mail server.

  Hello

  1. What is the exact error?
  2. This only happens when you install AVG?
  3. what mean you exactly by "a message that failed on an e-mail server achieved."?

  I suggest you to run the Fixit and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
   

  Reply back with more information to help you solve the problem.

  Hope this information is useful.

• Unexpected error message

  Exception code 3765269347

  Exception address 7C812AFB

  Hello

  When exactly do you get this error?

  Perform a clean boot in order to check whether a third-party application or service is causing the problem. With the help of the boot, we can isolate the conflicting application to resolve the problem.

  Refer to this article for help:

  How to configure Windows XP to start in a "clean boot" State :
  http://support.Microsoft.com/kb/310353

  Please see the article mentioned below before posting your question, because it can help you to provide all the relevant details relating to the issue:

  How to ask a question:
  http://support.Microsoft.com/kb/555375

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Deskjet 3050 a - two unexpected error messages

  I used my 3050 has fortunately since buying in November 2011. I buy genuine HP cartridges, XL in size and provided directly by Amazon.

  Each cartridge hp301 held recently, replacing within days of each other. Replacement of the cartridge of fine color and the alignment page analyzed as usual.

  (1) However when I replaced the black ink cartridge, the printer refused to recognize the page alignment when offered for scanning, and after several similar attempts set to 'default quality '.

  (2) the message "no compatible cartridge" and then began to regularly appear on the printer screen, sometimes blocking attempts to print.

  Please any player does not recognize one or both of these problems?  I ran HPPSdr.exe and says the printer is working correctly. How then can I get the printer to its fully operational state?

  Thank you pending, Jon G

  It looks like two of these stem from the same problem: a problem in the ink system.  I would recommend a complete ink system reset on the printer.

  * Remove the cartridges from the printer

  Unplug the unit when turned on

  Disconnect the other end of the power cord from the wall jack directly

  * Wait 60 seconds

  * While the printer is turned off: get a fluffy and clean water

  * Clean the electrical contacts of the black and three-color cartridges and corresponding contacts in the printer

  * Dry contacts

  * Plug the printer back to

  * Insert the cartridges after the powers in place and asked to supply ink printer

  There is also a document to the default alignment issues which can be found here.  I hope this helps.

• Catalog does not open due to the "unexpected error".

  Although I installed Windows 10 weeks there, I used LR 5 several times since.  Now I get the unexpected error message.  I have 3 other catalogs, although I am not encouraged by the fact that they have dates of 01/05/2015, 12/01/2015 and 27/11/2014, none of them is open for the same reason.  Integrity tests the result in the same error.  I tried not to create a new catalog.  I would like to make a return to the top of this catalog as it was before today and the one before that.  What my next move here?  I have

  I could open a supported catalogue on an external drive.  By trial and error, I got another error message, but this time it said I didn't have administrator rights in the file I was trying to save in.  Should occur during the recent migration of Windows 10.  I got the necessary permissions and so far seems to work very well.  But thanks for your interest!

• The search returns an unexpected error

  I just did a fresh install of Windows XP Pro/sp3.

  The research and the companion does not work.  It returns an error message which: unexpected error: action could be completed.

  Disabled the indexing service (using the companion anyway).  Same result.

  I first tried this:
  Start > run > cmd [Enter] [command prompt opens]
  regsvr32 jscript.dll [Enter]
  Regsvr32 %Windir%\srchasst\srchui.dll [Enter]

  I got a positive result on each attempt.

  But the search is the same.  No error message just looking.

  Then I tried the Windows\inf folder for the srchasst.inf file, right click and choose Install.  He asks me the SP3 CD, but when I insert that, he won't find the file msgr3en.dll on disk.  So he did not finish.

  No idea how to get the search works again.

  Thank you

  Carl

  Hi Carl,

  Follow these methods.

  Method 1: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2: Create a new user account.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

• How can I get rid of the error message error "jre terminated unexpectedly" at first upward?

  How can I get rid of the error message error "jre terminated unexpectedly" at first upward?

  [Moved from comments]

  Hello

  Re: Java... You should do some research and decide. I disabled the add-on modules. Many would say that this is not enough.

  Here is an article good start:

  Java security hole: so forth and so | Articles from Computerworld:
  http://blogs.Computerworld.com/cybercrime-and-hacking/20921/Java-security-flaw-yada-yada-yada

  Search terms such as 'java vulnerability","java security"and" disable java "will return useful information.

  Don

• Muse gives the message "unexpected error I-200.

  Muse gives the message "unexpected error I-200. I had downloaded 7 beta of Muse, but he would not accept one of my passwords. I uninstalled Muse CC and tried the beta version, but still have the error I-200. I got the same message after I tried to reinstall Muse CC.

  Y at - it ay problem with execution of the beta and the CC version on the same system? They had worked before.

  Hi Olivier,.

  Until I received your message I searched and found a note just to get rid of the opm.db file in this folder and it took care it. Thanks anyway.

  Oh, and is there a way to make the thumbnails for the image which is presented in a slide show? We try to edit a great show and it is difficult to find where you look at the thumbnails because nothing is highlighted.

  Thanks again,

  David

• Running Firefox 10.0.2, can not add new Mycroft Project search engines. Error message: "you need a browser that supports opensearch to install this plugin" Please help with the steps on how to solve this problem in Firefox, thanks

  Cannot add new Mycroft Project search engines in FF 10.0.2. Error message states: "you will need a browser that supports opensearch to install this plugin.

  You can install the Sherlock plugins or lacking as well?

  • http://mycroft.mozdev.org/Google-search-plugins.html

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• Could not load any websites. I don't get any 'error message', the 'enter' key has no effect in the address bar. Works fine in FF and IE search box.

  Entering a URL in the address bar and pressing on enter does nothing. Or the 'enter' key or 'address arrow bar', to go to the site function. Web site does not load and no error message appears. 'Enter' key works very well in the FF and IE search box, is not my keyboard.

   Tried most of the recommended fixes under the "Error loading websites" article with the exception of "DNS refetching", as typing "about:config" in the location bar does no good as the "enter button" won't function. I've removed and re-added FF back into the windows firewall, removed ZoneAlarm from my system, edited proxy settings, deleted and reinstalled FF several times. NOTHING WORKS!!! I'm a die hard FF fan and this is KILLING me. Please HELP!!!
  

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Error message when you use search

  Whenever I have open the drawer of the App and then click on the Spyglass button or use the search option, I get a fatal error message (process com.motorola.home is dead...).

  It works for you?

  Good tip!

  Uninstall the updates to the Google Search application (leaving the original Google Search app) and the error disappeared...

  Thank you very much!

• Windows Search / Immersive Control Panel / AppData Error Message

  I have a new laptop HP Envy delivered pre-installed with Windows 8.1 on a hard drive traditional.

  Immediately on starting it the first time, I connected a SSD to the laptop via a USB cable and used imaging software to drive provided by Samsung to the HARD whole to the new/empty SSD disk image.

  Returned & replaced the HDD SSD w / in 1 Bay drive, followed by placing the original HARD drive (but now secondary) in the 2 Bay drive.

  I wanted to re - map the 'My Documents' folder on the SSD to store files in this folder on the secondary HARD drive, so I remapped this ("c:\users\Brad\Documents") folder to point to 'f:\users\Brad\Documents' instead.

  "So move on, for some reason, when I go to the desktop search item and try, for example, to search for"Remove Apps", which translates by he find something like"Uninstalling apps to save hard drive space"or something like that, and I click on uninstall apps to save hard disk space", I get a message similar to the following :

  [Window title]
  C:\Users\Administrator\AppData\Local\Packages\windows.immersivecontrolpanelcw5n1h2txyewy\LocalState\Indexed\Settings\en-US\Classic{4026492f-2f69-46b8-b9bf-5654fc07e423}.settingcontent-ms
  [Content]
  Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  I'm not sitting on my laptop right now, but I found the info. top online and there are very close to the error msg. I get, except that instead of "c:\Users\bmccollum\AppData\...". ", the title of the GMS. I get begins with "f:\Users\bmccollum\AppData\...". ». I don't remember remapping anywhere at all outside the location of 'My Documents', then why is this research activity trying to seek the "AppData" folder on my hard drive secondary now?

  This same error msg occurs when I am looking for another couple of points, but above all what I find and click work.

  For two items that I seek and I click on the element are, and I get this error message, if I go to the elements of the "long way" but just clicking 'Control Panel' or anything else and keep them on the street from there, items open fine, it's just when I try to click on a few items after that I looked for something they are not w / the same error msg from above.

  I searched around online and have tried the trick of "rebuild indexes" and this seems to fix errors related to research for just a little, then a few minutes later I can look for the same thing that was previously the 'Immersive Control Panel' error and bam, it is back again with this similar to one already mentioned msg.

  Something seems to be pointing to "AppData" being on my drive 'f' (secondary) when I don't think I moved anything but my "my documents" of primary transmission 'c' to secondary drive "f".

  I'm quite lost. Any other ideas on what may be the cause/solution for this?

  Thanks in advance.

  Hey @zildjian ,

  Welcome to the HP Forums!

  I understand that you are having problems with the paths to files on your Envy laptop.

  The most important thing here is that looks like you have cloned the drive, but not the format of the original HARD disk. This will cause a plethora of problems because you now have 2 boot managers and repositories of operating system file. Windows will have a fit over this.

  I suggest copy important information from the HARD drive to an external drive or for SSD and formatting the drive. This will wipe the Windows installation and free up additional space. From there, you can create a Documents folder and map the folder accordingly.

  You remap F:\Users\Brad\Documents by adding it to the document library or did you use the move feature tab in the properties of the Documents folder location?

  Please try the original function of HARD drive and test development shaped.

• Error message from DPM 2010 and an unexpected error has occurred on the DPM server during a VSS operation.

  Hello

  I have a server running on a Windows 2008 R2 server DPM 2010

  Currently save a mix of virtual and physical machines, these are a mix of Windows Server 2003 SP2, 2008 & 2008 R2.

  The DPM was previously a bit crumbly, but it was supposed to be caused by lack of disk space. A QNAP server was introduced and configured as an iSCSI target. After the initial problems, it works now.

  EXCEPT

  Three volumes of backup not. They were part of the protection group but they had no point of recovery at all. I deleted their protection groups and have tried to add them to their original groups. These 3 volumes all fail with the following error message:

  An unexpected error occurred on the DPM server machine during a VSS operation.

  Error details: VssError:Shadow copy the specified volume only is not supported. (0x8004230C)

  3 volumes are on 3 different servers.

  All 3 servers are running Windows 2003 SP2

  3 servers have other volumes that are save successfully and consistantly

  There are an additional 3 servers Windows 2003 SP2 that all volumes save successfully and consistantly.

  I can run shadow copies on these three volumes on servers

  All servers run the latest DPM Agents

  3 volumes have unused production capacities, Gig instead of Mb

  The pool of storage on the DPM server has two disks in the storage pool, the local disk has 10 TB of capacity and 45% free, the iSCSI target has capacity to 55 and 78% free.

  There are no. VSS errors in system or application logs (or I've noticed in just about any other log file) on the DPM server or the customer Server

  I have tried to add in the protection group, 3 volumes at once, one at a time or a small directory, or create a new protection group and still get the same errors.

  I ran the Windows updates on these servers

  So far all I can say the disk permissions look OK and match those of the other volumes of work.

  I know that having two drives in the storage pool is not ideal, and it will be changed but not up to what I have fixed the problems on the three volumes.

  Hello

  I suggest you to report this issue in support for Windows Server 2008 R2: http://technet.microsoft.com/en-us/windowsserver/bb512923

  Thank you.