I can't install my camera in plug-and-play sanoxy.

Similar Questions

• can t get the dvd is plug and play no response

  For some reason any can t get dvd to the plug and play have teenager who could hepatitis changed something

  Hello

  1. What do you mean "t get to dvd don't plug n play no response"?

  2. using a cd/dvd external drive?

  3. what program you're using to play the dvd?

  If you use an external dvd drive and it is not detected, then run the hardware and devices Troubleshooter

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the DVD drive is detected and the disc is not read by the cd/dvd drive, follow

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  Answer with the information required to help better.

• How to install and use a plug-and-play mini dvr/camera in windows xp?

  Forgive me, I have very little computer knowledge. I need step by step instructions on how to use a mini-dvr/camera "plug and play" in windows xp. How do I connect my dell d600 laptop? How to play what I recorded on it?  Thank you in advance for any help rendered.

  Hi, Fred Flintstone786,.

  ·         Have you tried to plug in the device?

  ·         The unit get recognized by the computer?

  Please see the following articles for more information on the Plug-and-Play devices:

  Overview of plug-and-Play

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/pnp_overview.mspx?mfr=true

   

  Installation overview of devices

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hardware_installing_overview.mspx?mfr=true

   

  Get the Plug and Play device driver support

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/pnp_driver_support.mspx?mfr=true

   

  To reinstall a Plug-and-Play device

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/devmgr_reinstall_device.mspx?mfr=true

  Hope this information helps.

• How can I disable USB Plug-and-Play?

  Whenever I plug a camera into my USB port, Windows 7 treats as it has never been plugged in before.   When I plug my iPhone or iPad to synchronize with iTunes, Windows 7 starts trying to reinstall the drivers for it even though I just unplugged it five minutes ago.  When I plug my mouse, I get the same thing.  I use a laptop for the convenience of being able to unplug everything, put it in a bag and take it with me.  It is ridiculously annoying having to wait five minutes or more to start using my mouse whenever I put in place somewhere else.  Have to restart iTunes every time I plug in my phone, because Windows decided not to recognize the device even when I had just plugged in a minute there is delayed.  It is a stupid feature, and anyone he designed by default to this mode should be fired for being a fool.

  (1) you cannot disable

  (2) but you can disable the USB plug and connect service

  (3) START - RUN - type SERVICES. Enter MSC

  (4) in the right pane, find PLUG-AND-PLAY, then right-click, choose Properties

  and then MAKE some disabled

  (5) reboot your system

  (6) before the opening of the session, go to the BIOS settings, select USB controllers all THE

  (7) download and install latest correct chipset driver for your model of motherboard

  website of motherboard

  Good luck

• The devices plug-and-play USB do not install on XP pro sp3 that new hardware wizard cannot find the software.

  Running XP PRO with SP3 and the latest updates as of 12/14/10.

  Both a logitech M570 wireless receiver USB trackball and cause a cooler hub from the usb port 4 master the new wizard material to search for drivers but ultimately are not found.  Neither disks driver with devices or of are available on the Web sites of the companies.

  I also encountered the same problem with a new sandisk sansa mp3 player recently. It was recognized instantly on another computer running Vista.

  However, I have an eternal hardrive of WD and a recognized on my laptop XP Trendnet USB wireless adapter. In my view, that all have two drivers I installed earlier however.

  In the end, I believe not to be able to use the Plug-and-Play devices despite them being listed as compatible with XP.

  I removed the devices, restarted, nothing helps. Unknown poster USB 2.0 Device Manager hub and 2 other unknown devices.  I uninstalled the unknown devices in Device Manager and do it again, but no change.

  Don't know what other information I should include. Any help please, I'm at a loss what to tackle next.

  Hi pennybrown,

  Follow the steps below and check, if it helps:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:http://support.microsoft.com/kb/322756

  To create a new registry entry that disables the selective suspend of the USB hub driver feature, follow these steps:

  a. Click Start, click Run, type regedit and then click OK.

  b. Locate and then click the following key in the registry: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB

  c. on the Edit menu, point to new, and then click DWORD.

  d. type DisableSelectiveSuspend, and then press ENTER.

  e. in the Edit menu, click on change.

  f. type 1 and then click OK.

  Note: This setting affects all USB host controller drivers in the system.

  If the DisableSelectiveSuspend registry entry value is set to 1, the selective suspend feature is disabled. In addition, allow the computer to enable this device to save power power off the checkbox does not appear under the tab for the USB root hub power management.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I install my photoshop elements 12 and first elements 12 on my MAC

  How can I install my photoshop elements 12 and first elements 12 on my MAC Book?  A CD came with it, but my MAC is not a CD player?

  Download it from

  Download Photoshop Elements products | 10, 11, 12, 13

  Download Premiere Elements products | 10, 11, 12, 13

  Install and enter your serial number.

• I have Windows 7 on my laptop but said I can't install Firefox, it's true, and if so, Mozilla is considering the development of a compatible version?

  I have Windos 7 on my laptop says buthave I can't install Firefox, it's true, and if so, Mozilla is considering the development of a compatible version?

  What wrong with your Firefox? Firefox 8 is compatible with Windows 7

  • getfirefox.com

  You can send us screenshot?

• How can I enable UPnP (Universal Plug and Play) or NAT - PMP (NAT Port Mapping Protocol) Protocol?

  I'm trying to set up the screen Edovia and they say that I need to enable UPnP (Universal Plug and Play) or NAT - PMP (NAT Port Mapping Protocol) Protocol.

  How can I do this?

  In Airport utility. The form is in your router.

• How can I disable the mouse pad when you use a mouse plug-and-play?

  How can I disable the mouse pad when you use a mouse plug-and-play? I tried to disable the driver, and nothing works.

  Hello

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Why do I get a message "software you are installing has not passed Windows Logo test, such as Legacy Driver, Activity Monitor and driver plug-and-play

  WY the message about not to test the Windows Logo on these drivers as follows: Legacy Driver, Activity Monitor and no plug-and-play drivers

  Hi John,.

  Thanks for posting this question in the Microsoft Community.

  I'll certainly try and help you get the problem solved. Please provide us with some answers before proceeding.

  1. when exactly you get the error message?

  2. are you aware of any changes made to the computer before the show?

  This type of error message arises usually when the driver that you are trying to install has not passed the Windows logo test or is not approved by Microsoft.

  Here is a link with a few steps of good to help solve problems like yours. Go through the steps from 1 to 10 and check if that helps.

  Hope this helps and provide us more information if you need more assistance. We will be happy to help.

• I CAN'T INSTALL WINDOWS UPDATE (IMPORTANT) KB2761494 AND GET 80073AA2 ERROR CODE

  • I CAN'T INSTALL WINDOWS UPDATE (IMPORTANT) KB2761494 AND GET 80073AA2 ERROR CODE.   THIS HAPPENED SEVERAL WEEKS
  • THANK YOU, MARK SZYMANSKI
    

  Hi Mark,

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not install Windows update to KB2761494 with error code 80073AA2. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. is the specific question for the individual or all of the updates?

  2. did you of recent changes made to your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

   

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer and try to install the updates.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Method 2:

   

  Manually install the update from the link below.

   

  Framework for drivers Windows version 1.11 cumulative update for Windows Vista and Windows Server 2008:

  http://support.Microsoft.com/kb/2761494

   

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

• You can use wireless controller if you use Plug-and-play?

  Hello, I was wondering, is it possible to use a wireless controller with my pc, if I use a plug and play?

  If the wireless controller is equipped with a usb port on the computer to connect to it, then it is probably intended for use on the PC. You can't just use a PS3 or Xbox controller on the computer just like that.

• How can I reinstall the non-plug-and-play drivers that I have uninstalled mistakeningly?

  I have a Dell Inspiron and recently started having random blue screens, close down and the inability to get out of hibernation with her. I ran Microsoft Security databases, and he is found to have viruses Alureon.A, whom he said he eliminated, but when running - it again, it was in Quarentine. Tried to get into SafeMode w / networking to remove and it quarentined again. Return to normal and it works, it shows up again!
  I did some research on Google and found another way to remove it by devmgmt.msc and could not find the file that it supposed to delete. A next post had a list of non-plug-and-play drivers, and I misread this post and uninstalled the files he had. Reading - it a second time, they were not the drivers to uninstall! So now I uninstalled the drivers, that I should not have, and I'm afraid to turn it back on. What should I do? Is there anyway I can get these drivers or is it easier to reinstall Windows Vista all together and fix the drivers and get rid of the virus?

  I was also unable to update Windows with this virus, with MSE.

  Accidentally uninstalled files were:
  A sound signal
  HTTP
  NDIS system driver
  NDProxy
  Null value
  RDPCDD
  Remote Access Auto Connection Driver
  VgaSave

  First of all, I recommend you download and run the program below.  It's the only one I found that systematically identifies and removes infections Alureon.

  How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)?

  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  So, I see two possibilities. Sfc/scannow in an elevated command prompt might reapair missing files and is worth a try.

  If this fails, try the system restore.  It is a risk and could fail and possibly further damaging the system.  If If is running it will probably restore the infection as well.  In this case, restart TDSSKiller and other malware analysis.

  Although I always discover a wipe and reinstallaton ultimately, it may turn out to be necessary in your case.

• If I buy the photographer package, can I install on my macbook pro and my mac mini desktop. Where can I get this twice, one for each?

  If I buy the photographer package, can I install on my macbook pro and my mac mini desktop. Where can I get this twice, one for each?

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

  -An individual account is for one person and may not be shared with anyone else

• Can I install Acrobat DC on desktop and tablet pc

  Can I install Acrobat DC on desktop and tablet pc?

  Yes, you can download it on the desktop and for your tablet to refer to the link below.

  FREQUENTLY ASKED QUESTIONS | Acrobat DC mobile app

  Concerning

  Megha Rawat