I can't install Windows Update and instant messaging

Similar Questions

• After a fresh install with XP Home EWdition, Service pack 1, 2.0, and 3.0, I can't install Windows Update or IE8.

  After a fresh install with XP Home EWdition, Service pack 1, 2.0, and 3.0, I can't install Windows Update or IE8. Update back me to http://support.microsoft.com/kb/2497281

  Article ID: 2497281 - last review: January 18, 2011 - revision: 1.0

  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000, or Windows Server 2003 if these versions of Windows are not updated with the latest Service Pack

  But I have service Pack 3.  IE8 fails, install a convenience store, but after following the instructions there is no difference.

  I am at a loss for the next steps...

  There was problems with the server for updates for a few weeks now...

  Many people say that download and run the Update Agent stand-alone file solves this problem:

  http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x86.exe

  For more information:

  http://support.Microsoft.com/kb/943144

  For later use, it is not necessary to use all the steps you mentioned. You can upgrade directly from SP1a to SP3.

• I CAN'T INSTALL WINDOWS UPDATE (IMPORTANT) KB2761494 AND GET 80073AA2 ERROR CODE

  • I CAN'T INSTALL WINDOWS UPDATE (IMPORTANT) KB2761494 AND GET 80073AA2 ERROR CODE.   THIS HAPPENED SEVERAL WEEKS
  • THANK YOU, MARK SZYMANSKI
    

  Hi Mark,

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not install Windows update to KB2761494 with error code 80073AA2. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. is the specific question for the individual or all of the updates?

  2. did you of recent changes made to your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

   

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer and try to install the updates.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Method 2:

   

  Manually install the update from the link below.

   

  Framework for drivers Windows version 1.11 cumulative update for Windows Vista and Windows Server 2008:

  http://support.Microsoft.com/kb/2761494

   

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

• The error code is 00000643. I can't install the update and I think it comes to Netframe.

  I can't install this update and I keep getting the error code 00000643. What should I do?

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  =====================

  Step #1 => foremost, note what version of .NET Framework is installed:

  How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
  http://support.Microsoft.com/kb/318785

  Step #2-online now see resolution method 2 in this related KB article: http://support.microsoft.com/kb/923100

  After the the .NET Framework Cleanup tool, reinstall all the versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

  NB: If you remove the .NET Framework 3.5 (SP1) by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

  IMPORTANT! =>, If you remove the .NET Framework 3.5 (SP1), reinstall your version of .NET Framework in the following order:

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the relatedhttp://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

  Step #3 => Check-in at Windows Update and install the critical updates of security offered.

• How can I install Windows Update error 80244019 Windows 7 32 bit?

  How can I install Windows Update error 80244019 Windows 7 32 bit?

  Try to use this to reset the update system is very good,.

  Use Option 2 on the list after right click and select run as administrator

  https://Gallery.technet.Microsoft.com/scriptcenter/reset-Windows-Update-Agent-d824badc

  Download in your downloads folder

  Right-click and select extract all in the downloads folder.

  Then right-click on ResetWUEng and select run as administrator

  Follow the rest of the guides messages

  Press any key to continue

  Type 2 for this Option on the list and the Enter key to reset the update services...

  Press y for Yes and then the Enter key I think twice

  After that that he completed

  Type 15 for this option and the Enter key to restart the machine.

  Must they will restart in 60 seconds will save your work... Press a key to continue.

  After reboot, go to windows updates and manually check the updates shouldn't take a few minutes.

  

  Subsequently

  The manual installation of updates that you have to change your update settings to never check the updates and restart the machine first.

  http://www.SevenForums.com/tutorials/2797-Windows-Update-settings-change.html

  Make sure that KB3020369 is installed, otherwise install it manually it is detailed with all versions, article page

  https://support.Microsoft.com/en-us/KB/3020369

  These links will prompt you to download as soon as you click on them just for you give a heads up :)

  Win - 7 32-bit

  https://download.Microsoft.com/download/C/0/8/C0823F43-BFE9-4147-9B0A-35769CBBE6B0/Windows6.1-KB3020369-x86.MSU

  Win - 7 64-bit

  https://download.Microsoft.com/download/5/D/0/5D0821EB-A92D-4CA2-9020-EC41D56B074F/Windows6.1-KB3020369-x64.MSU

  Then manually install page article detailed KB3172605 with all versions.

  https://support.Microsoft.com/en-us/KB/3172605

  KB3172605

  Win - 7 32-bit

  https://download.Microsoft.com/download/C/D/5/CD5DE7B2-E857-4BD4-AA9C-6B30C3E1735A/Windows6.1-KB3172605-x86.MSU

  Win - 7 64-bit

  https://download.Microsoft.com/download/5/6/0/560504D4-F91A-4DEB-867F-C713F7821374/Windows6.1-KB3172605-x64.MSU

  After your windows update settings back to what you had before, and manually check the updates and the rest should appear shortly.

  If you need Visual AIDS to refer to this

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-problems-read-this-first/28147a5f-B0B0-480b-bed9-834a2da7a375

• I am trying to install Windows Update and get 800F080D for IE9. Why?

  I am trying to install Windows Update and get 800F080D for IE9.  Why?

  Hi KevinMiller

  
  1. don't you get the error only during the installation of internet explorer 9?
  2. when exactly you get the error message?
  3. that you get an error when installing other windows updates?

  I suggest you to check if you have all the prerequisites installed for internet explorer 9.

  http://support.Microsoft.com/kb/2399238

  
  Refer also to the links below and check if you did all requirements before installing internet explorer 9.
  http://support.Microsoft.com/kb/2409098

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9

   

  I hope this helps.

• Cannot install Windows updates and updates Antivirus on Windows Vista

  Original title: laptop computer started to freeze on virus scan always on the same folder.carried on the full recovery of the system partition on laptop, then only left with factory shipped programs. Unable to download windows updates or antivirus updates.

  OS Vista Home premium version 6. No display service pack not installed? THAT IS TO SAY 7. After the system recovery, I had 2 anti-virus bootable and performed analytical full but neither anything picked up.

  Hello

  ·        What happens when you try to update windows? You get the error message?

  ·        What are the updates you are trying to install (KB number)?

  ·        What security software you use?

  I suggest to disable the security software and then try to install windows on the system updates and checks to see if you are able to install or not.

  Note: Activate security software once you've done the test.

  Check in the window update and we do know are the updates that you try to install on the system. See the article mentioned below.

  Updates: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  Step 1:

  It may be that some third party software is running in the background which is interrupted, I suggest you do a clean boot and check. To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 to start the computer in normal startup.

  Step 2:

  Reset windows update components and check. Follow the steps mentioned in the article below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Step 3:

  I suggest you to run some Surinamese check check the article mentioned below.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821/en-us

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I tried for weeks install windows updates and get this message error (s) found: code 80070645 windows has encountered an unknown error. How can I solve this problem?

  Windows Update
  Error (s) found: code 80070645 windows has encountered an unknown error.
  I had before the shock of two antivirus this proven system restoration started but no help.
  Fix it to charge microsoft, but has not helped any.

  How can we if this problem, so I can install the updates I need?

  Hi Wyattsdaddy,

  Thanks for posting your question.

  Step 1: Check if Windows update-related services are set to automatic and started.

  Click Start, type services.msc in the start search box, right-click to services.msc, and then click Run as administrator.

  Check the above services below:
  (a) Background Intelligent Transfer Service
  (b) cryptographic service
  (c) Windows Update

  Step 2: Rename the Catroot2 folder

  To rename the Catroot2 folder, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  2. at the command prompt, type the following commands and press ENTER after each line:

  net stop cryptsvc
  Ren %systemroot%\System32\Catroot2 oldcatroot2
  net start cryptsvc
  output

  3 remove all tmp*.cat to the following folder:

  % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

  If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

  Important: Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

  Step 3: Reregister DLL files that are associated with Cryptographic Services

  To register .dll files that are associated with Cryptographic Services, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.

  2. at the command prompt, type the following commands and press ENTER after each command:

  regsvr32 /u softpub.dll
  regsvr32 /u wintrust.dll
  regsvr32 /u initpki.dll
  regsvr32 /u dssenh.dll
  regsvr32 /u rsaenh.dll
  regsvr32 /u gpkcsp.dll
  regsvr32 /u sccbase.dll
  regsvr32 /u slbcsp.dll
  regsvr32 /u mssip32.dll
  regsvr32 /u cryptdlg.dll

  regsvr32 softpub.dll
  regsvr32 wintrust.dll
  regsvr32 initpki.dll
  regsvr32 dssenh.dll
  regsvr32 rsaenh.dll
  regsvr32 gpkcsp.dll
  regsvr32 sccbase.dll
  regsvr32 slbcsp.dll
  regsvr32 mssip32.dll
  regsvr32 cryptdlg.dll
  output

  Note: Click OK if prompted.

  Restart the computer.

  Step 4: Empty the software distribution folder

  1. Click Start, type services.msc in the search box, click services.msc, and then click Run as administrator.
  2. in the Services (Local) pane, click Automatic updates and then click on stop.
  3. reduce the Services (local) window.
  4. Select all the contents of the Windows distribution folder, and then delete them.

  Note: By default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
  5. make sure that the Windows distribution folder is empty, and then enlarge the Services (local) window.
  6. in the Services (Local) pane, click Automatic updates, and then click Start.
  7 restart the computer, and then run Windows Update again.

  Item appraised: http://support.Microsoft.com/default.aspx/KB/822798

  Step 5: Disable the security software
  Note: You can enable it later.
  Step 6: Scan Run SFC
  Please follow the steps below to the auditor of the filesystem as the first steps:

  1. Click Start and type cmd in the box start the search.
  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.
  3. at the command prompt, type Sfc/scannow, and then press ENTER.

  Note: The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.
  http://support.Microsoft.com/kb/949104/

  Step 7: Components to reset Windows Update
  http://support.Microsoft.com/kb/971058

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get my flash drive to work? When I install, Windows does not recognize it. In addition, I can't run windows updates and my Install.exe is not responding

  Since I installed Norton I had problems with my computer. I uninstalled it to see if anything works. No luck.

  Since I installed Norton I had problems with my computer. I uninstalled it to see if anything works. No luck.

  Try this. First of all, download and run the utility to remove Norton from the link below.

  Norton removal tool. (click on your version of norton to download the tool).

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=20080710133834EN&product=home&PVID=f-home&version=1&LG=en&CT=us

  Then reinsert your USB key after a few reboots to see if it is recognized. If this is not the case, refer to the procedure described in the link below.

  USB drive not recognized xp.

  http://support.Microsoft.com/kb/925196

  Also, click on Start, run, type ""services.msc ' in the Run dialog box. " Click on 'ok '. Scroll down to "Background Intelligent service". "" Right-click on the service and select Properties. The service is in the started state? If this is not the case, click the button to start the service and the value manual starttype.

  Regarding Windows Update problem, first check your level of service pack for xp by clicking Start, run and type of dialog box running 'winver '. If your service pack is sp3, skip this step and try to reset the windows update components. Refer to the link below to get the procedure.

  http://support.Microsoft.com/kb/971058

  If you don't have XP SP3 installed, you can download and install from the link provided below.

  Windows XP SP3

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  If have any questions, post here on this thread. Good luck.

• I can't install Windows updates security for Microsoft Office System 2007: 646 error Code

  I can not install the following Windows updates:
  Update for Microsoft Office System 2007 security:

  Update of security for Microsoft Office Excel 2007 (KB982308)
  Update of security for Microsoft Office InfoPath 2007 (KB979441)
  Update of security for Microsoft Office PowerPoint 2007 (KB982158)
  Update of security for Microsoft Office Word 2007 (KB982135)
  Update of security for Microsoft Office System 2007 (KB982312)
  Update of security for Microsoft Office System 2007 (KB982331)

  I get the error code 646.  If someone could help me, I would appreciate it.

  Hello

  Here's what I recommend you do:

  1. disable UAC (do this if you are using Vista or Windows 7, otherwise, go to step # 2). Comes down

  restrictions - turn it off completely.
  2 restart your computer for the change to take effect.
  3 re - download the update of security for Microsoft Office System 2007 (KB982331) from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en
  4. install. It should work fine.
  5. If it still does not work, try to open all or part of your MS Office applications (such as MS Word, MS Excel, etc.).
  6. follow steps 3-4.
  7. If it still does not work, follow step # 3 again. After you download it, try unplugging your computer from

  Internet (unplug the internet cable or turn off the modem). Then, try to install the downloaded file

  (KB982331). It should work this time.

  Do the same for all the updates that come with KB982331, IF ANY.
  Let me know your results.

  WARNING: This is only a WORKAROUND and not a RESOLUTION. The resolution is displayed as soon as we have it.

• 00000646 error code when you install windows updates and upgrades security for the windows desktop.

  When I try to download windows office updates and security of office windows dates I get an error code 00000646. I don't use windows desktop and I did not sign up for the windows desktop. could this way is not not the administrator of windows on my computer desktop, this is the reason why I can't download these dates?

  Hello

  Here's what I recommend:

  1 disable UAC. Down comes the restrictions - turn it off completely.
  2 restart your computer for the change to take effect.
  3 re - download the update of security for Microsoft Office System 2007 (KB982331) from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en
  4. install. It should work fine.
  5. If it still does not work, try to open all or part of your MS Office applications.
  6. follow step 3.

  Let me know your results.

• Cannot install windows updates and updates history screen is empty.

  I can't install the windows updates. I have Windows Vista Home Premium. My automatic update is running... I studied and thought that the problem was with some service pack 2 I had to install - I did and nothing helped. My windows update history page is completley empty and Iwonder why. Also, I now can't seem to connect my Nokia phone to my computer as he finds the right driver online, but then it cannot install it. Can someone tell me what on Earth is cause of these problems. Thank you

  The computer had only preinstalled Norton or McAfee, but I've since deleted these programs because I found them to be boring...

  A properly installed, fully functional anti-virus application should never be boring. Although that pretty much excludes from the application of all the Norton and McAfee in my humble OPINION, there are others available.

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for freeand download/run the appropriate removal tool before installing updates, Service Packs, Windows or the IE upgradesand before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need help, please start a new thread in this forum:

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Wish I had better news for you! Good luck.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install windows updates and also msconfig, regedit, Task Manager won't open?

  Hello

  I use windows xp professional sp3.

  Nothing happens when I try to run msconfig, regedit, Task Manager, etc.. They don't open even in Safe Mode.

  Apart from that, windows update is not able to install updates and repeatedly tries to install the same updates again and again and fails permanently.

  Sometimes, when I try to run some .exe files, I get an error message... 'not a win32 application valid', even if its a win32 version.

  The boot.ini file is missing. I've already replaced the missing hosts files.

  Could someone help me please?

  Concerning

  ND

  Hello ndastolwala,

  In addition to the entrance of Allen Howard, you can also try a repair installation.  I have included the link below and hope that this can help out you.

  Repair the Windows XP installation:

  http://support.Microsoft.com/kb/917964

  Thank you

  James

• I get the error code 80070020 when installing windows updates and also my computer crashes a lot. How to fix?

  I'm unable to install all the updates of windows - getting error code 80070020.  Have tried the suggested steps and they didn't work.
  Also can't get with my computer freeze.

  Did you just listed:

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates
  http://support.Microsoft.com/kb/883825

• I can't install Windows Update. Error code 641

  Hello!  I hope I'm posting in the right place.

  I tried several times to install updates and nothing has worked.  The said tool fix fixed it and maybe he did because a few updates have been installed, but many were not.   I'm not very technical, but I'll try to explain in as much detail as possible.

  I am running Vista Home Basic. It has Service Pack 2. The Type system is PC based X 86.

  Get error codes on some 641 and 80070020 on others. As I said I'm not technical and maybe I don't know what I'm talking about, but I think that the computer is missing some critical files. For example, sometimes he said: the installer of Windows are not available. I don't know if I need that updates however. Finally, I tried the fix and he said: it has been fixed. I managed to install as 1 update, but most of them failed or if windows update said it was successful, when I restart updates have been configured wrong, so he returned changes. I disabled avast anti-virus & system guard (mechanic system) because I thought he could block and which seemed a little help I got an update installed.

  I continue to look for solutions and try new things. I tried to download the Windows Installer 4.5 Redistributable. I think that windows6. 0-KB942288-v2-x 86.msu is the one that I want, but it continues to tell me that it does not apply to the computer. Choose one bad? It's Vista and x 86 (said information system). I've tried every solution I could find in the forums, but nothing works. I think something must be reinstalled, but I don't know what. If someone can tell me what to do?
   
  Original title: can not install updates

  Hi Jevene,

  That's what helped us:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Installer-constant-issue/3343eba9-393b-4587-8476-c27c55ec3e99
  * the reason for this problem
  Windows Installer is corrupt usually when you have iolo System Mechanic, because it has a registry more clean it affect the registry of Windows Installer.
  As the above steps will help the register of Windows Installer to work again.
  Hope this helps,
  Please come back if you need assistance
  Thank you
  Makoi