I can't photoshop elements to load once I installed.  I'm on a mac with OS 10.10.2. What I am doing wrong?

Similar Questions

• The attached VI works when I run it initially to create the XML file, but by pressing once the XML file is created, it is not up-to-date. What I am doing wrong?

  The attached VI works when I run it initially to create the XML file, but when I change the data and run once the XML file is created, it is not updated with new data. What I am doing wrong?

  Thank you.

  It sounds like the logic that has been written in VI

  Internal decision of true / false:

  (file exists: false) write in the file XML, unflatten for display

  (file exists: true) read the XML file, unflatten for display

  At no time when the file exists (true case) is the XML file updated...

• I have Adobe Photoshop elements 10 Costco edition in DISC format.  We have Macs.  However we have updated all the new Macs and do not have DVD drives in them.  I still have the old top Mac desktop that can run Photoshop, but I wan to install it also on my

  I have Adobe Photoshop elements 10 Costco edition in DISC format.  We have Macs.  However we have updated all the new Macs and do not have DVD drives in them.  I still have the old top Mac desktop that can run Photoshop, but I wan to install it also on my laptop.  I have serial numbers.  Where are the instructions to do this?  Thank you.

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• I have photoshop elements for my windows computer. I recently bought a mac, can I use my program even or do I have to buy a new one?

  I have photoshop elements for my windows computer. I recently bought a mac, can I use the same program or do I have to buy a new one?

  Impossible to use the same program because there are different versions for Windows and Mac.  But you might be able to use the same license - he can count on what version you have.  Older versions used the same serial number to use on each platform, while the most recent purchases are generally for one platform only unless you specifically buy a cross-platform license.

• Use Photoshop elements 2 and I can't seem to get, but a single layer, is displayed in the palette no matter how many photos that I place in the document.  What I am doing wrong?

  Use Photoshop Elements 2 and can't seem to get, but a single layer, is displayed in the palette no matter how many picutres I place in the document.  What I am doing wrong?

  Did some reading and found my problem. Sorry if I caused any problems.  Am just true layers again. Thank you all

• If I can download Photoshop elements 11 on my computer, I don't have a dvd player?

  ??

  I downloaded photoshop 11 on my old computer with disks.

  Hi mamacat,.

  You can download Photoshop elements 11 since the direct download links available at: http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l

  But make sure you follow the steps mentioned on the page before you start the download.

• I can't Photoshop Elements 5.0 to work on my new PC running Windows 7 - can anyone help?

  I can't Photoshop Elements 5.0 to work on my new PC running Windows 7 - can anyone help?

  It won't work. It is simply not compatible. Buy items 11.

  Mylenium

• Just bought Photoshop elements 13. Failed to install. ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Photoshop Elements.Where is the 64-bit version?

  Just bought Photoshop elements 13. Failed to install. ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Photoshop Elements.Where is the 64-bit version?

  PES 10, 11, 12, 13 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

  PSE 13 trial - http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements

  (Info for PC vs Mac: https://forums.adobe.com/thread/1658959?sr=inbox&ru=3738552)

• Case number 0208519203Can ' t get adobe photoshop element 10 to let me install disc 2 and 3

  My number is 0208519203.  I finally got disc 1 installation after that Ali found the serial number for me.  Now I can't get disc 2 or 3 to install.  What I am doing wrong.

  Depending on your computer, you need only a docs to install the software. The software must already be installed successfully.

  I think you're already ready to go!

  See http://helpx.adobe.com/photoshop-elements/kb/install-premiere-elements-photoshop-elements. html details BOF.

  Disc 2 contains a trial for Premiere Elements and the 64-bit version, disk 3 is for Mac OS.

  Number of disk	Description
  1	Windows
  2	Trial of PRE in Windows 7 (64-bit)
  3	Mac OS

• I am trying to download a trial version of photoshop CC. All I get is a series of squares moving around the center of a blank (white) screen. What I am doing wrong?

  I am trying to download a trial version of photoshop CC. All I get is a series of squares in round square in the middle of a white screen.
  What I am doing wrong?

  Seems like a problem with the browser you are using.

  Can you try on Chrome or clear the IE cache/cookies and try again.

• Basic tutorial shows a logo in the image of the lighthouse can be easily, folder + place. I don't have 'Place' in my drop-down list. I have 'Embeded Place' and 'bound place '. What I am doing wrong?

  Basic tutorial shows a logo in the image of the lighthouse can be easily, folder + place. I don't have 'Place' in my drop-down list. I have 'Embeded Place' and 'bound place '. What I am doing wrong?

  You do not have something wrong. January 2014 Photoshop CC update has added the ability to incorporate link GOLD Smart Objects. Before this update Photoshop CC, smart objects are always embedded in the Photoshop document. Although he made the biggest file size, it was as a backup plan because all placed files have been included in the document. Now you have the ability to embed or link the smart object. Link refers to the file instead of actually copying in your current file. Regarding your little tutorial, choose Embed.

• Can someone tell me what I'm doing wrong when you create a native extension for iPad? (Very detailed)

  My company is developing a game for iPhone and iPad using Flash cs5.5 and Air3.0

  The customer requires that certain features be supported - these things as GameCenter, rating, etc... which none are currently supported by flash for the iOS.

  However, they provide us with a bunch of xCode example files on how they want things to work.

  My idea was to bridge the gap in functionality by creating a native extension using the xcode source that was given to me, giving me the required functionality.

  But first, I need to truly CREATE a native extension, even just a base echo/hello everyone... I followed all the steps of various guides and tutorials and I have managed to create an ipa and put it on my iPad 2 to test, but when the program starts, nothing happens, I find myself with a black screen. When I comment on the lines of code that initialize the extension, it fires just fine.

  (and Yes, I even tried to put things in try blocks where there was a mistake - no luck)

  So I hope that someone can read through the process of what I do below and point out what I am doing wrong, or what Miss me.

  What I use:

  Mini Mac running OS x 10.7.2 - this is used to run xCode 4.1 build 4B 110

  PC - Windows 7 home 64 bit - running Flash CS5.5 (version 11.5.1.3469) with the 3.0 SDK inside AIR. I also have the sdk 3.0 air in a separate file for the command-line running. (This is my primary development platform)

  The PC has flash builder installed, but I've never really used it, and I don't know how to use it... everything that has been built to date has been done using Flash CS5.5

  So, here's what I did.

  The first thing we do is to create a library static .a on mac.

  I open xcode and create a new project.

  • Select iOS framework and library, then select "Cocoa touch static library.
  • Give it a name, in this case "EchoExtension" and put it in a folder.
  • I then delete the file EchoExtension.h as all the samples I've seen so far do not use.
  • I then add 'FlashRuntimeExtension.h' to the project of the AIR3.0 sdk frameworks folder on my PC
  • I remove everything in my folder ".m", and then, next to several different examples and tutorials, type the following code:

  //

  EchoExtension.m

  EchoExtension

  //

  #include "FlashRuntimeExtensions.h".

  Echo FREObject (FREContext ctx, void * funcData, uint32_t argc, {FREObject argv)

  return argv [0];

  }

  //----------- Extention intializer and finalizer ----------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------ -

  A native context instance is created

  void ContextInitializer (void * extData, const uint8_t * ctxType, FREContext ctx, uint32_t * numFunctionsToTest, const FRENamedFunction * functionsToSet) {}

  Configure the number of functions in this extention

  for ease of reference, set the number of function that will use this extension.

  int FunctionCount = 1;

  set the number of function pointer reference that will use this extention.

  * numFunctionsToTest = FunctionCount;

  create an array to store all the functions that we will use.

  FRENamedFunction * func = (FRENamedFunction *) malloc (sizeof (FRENamedFunction) * FunctionCount);

  create a table for each function entry

  Func [0] .name = (const uint8_t *) "echo"; the name of the function

  Func [0] .functionData = NULL;                    the data type

  Func [0] .function = & echo;             the reference to the real function

  Save the array to a pointer.

  * functionsToSet = func;

  }

  A native context instance is deleted

  void ContextFinalizer (FREContext ctx) {}

  return;

  }

  Initialization of each extension function

  void ExtInitializer (void * extDataToSet, ctxInitializerToSet FREContextInitializer *, FREContextFinalizer * ctxFinalizerToSet) {}

  * extDataToSet = NULL;

  * ctxInitializerToSet = & ContextInitializer;

  * ctxFinalizerToSet = & ContextFinalizer;

  }

  Called when the extension is unloaded

  void ExtFinalizer (void * extData) {}

  return;

  }

  • I'll then 'product', 'building' and it creates libEchoExtension.a
  • I'm copying this .to file on my PC.

  I am now finished with this abandoned mac of God (* shudder *)
  Back on my PC, I create a folder for my test project. For all the intentions a purposes, we will call this "D:\src\EchoExtension" then I create 2 folders, one called "lib" and one called "app". Lib, it's where I'm going to create the actionscript source for my extension.

  • In my lib folder, I create a new fla in flash cs5.5, called "EchoExtension.fla".
  • I create my lib folder, the following:
    • com\extensions\EchoExtension\EchoExtension.as
    • a folder named 'Build' in which I place my libEchoExtension.a file.
  • I have in my EchoExtension.as file, place the following code:

  package com.extensions.EchoExtension

  {

  import flash.events.EventDispatcher;

  import flash.events.IEventDispatcher;

  import flash.external.ExtensionContext;

  SerializableAttribute public class EchoExtension extends EventDispatcher

  {

  protected var _extensionContext:ExtensionContext;

  /**

  * Constructor.

  */

  public void EchoExtension()

  {

  Super();

  Initialize the extension.

  _extensionContext = ExtensionContext.createExtensionContext ("com.extensions.EchoExtension", "main");

  }

  public void echo(Prompt:String):String

  {

  Return _extensionContext.call ("echo") as String;

  }

  }

  }

  • In my main fla, on the first layer of the time line, I put just the following code to make sure that did get file included when I publish the swc.

  import com.extensions.EchoExtension.EchoExtension;

  var ext:EchoExtension = new EchoExtension();

  Stop();

  • I then opened upwards from my fla publication settings, disable the swf - which I don't need, and check the swc and ensure it generates in my generation folder.  «. "/ Build/EchoExtension.swc.
  • I also updated the player Air 3.0 (which I can do because I managed integrated AIR 3.0 along side my AIR 2.6 and can build both without any problem)
  • I then publish the swc. So far so good. No problems.
  • I then made a copy of the CFC and rename it to EchoExtension.swc.zip, how I extracted the library.swf file and place it in the folder of my generation.
  • I then create extension.xml in case of generation that contains the following code:

  " < extension xmlns =" http://ns.Adobe.com/air/extension/2.5 ">

  com.extensions.EchoExtension < id > < /ID >

  < versionNumber > 1 < / versionNumber >

  <>platforms

  < platform name 'iPhone-ARMS' = >

  < applicationDeployment >

  < nativeLibrary > libEchoExtension.a < / nativeLibrary >

  < initializer > ExtInitializer < / initializer >

  < finalizer > ExtFinalizer < / finalizer >

  < / applicationDeployment >

  < / platform >

  < / platforms >

  < / extension >

  • Now, at this point, I'm a little suspicious, because I build for the iPad2... the platform is iPhone... I thought that may be a problem and at some point I have tested the same build on the iPhone4 and had the same results. I also tested using the name of the platform of the iPad-ARM and got the same results... So I don't think that's the problem, but I'm not sure.
  • Now, to make things easier, I created a batch file called "buildane.bat" in my file generation. That's what I use to create my .ane file and it contains the following command line:

  D:\SDKs\AirSDK30\bin\adt-Paquet - target ane EchoExtension.ane extension.xml - CFC EchoExtension.swc - iPhone-ARM library.swf libEchoExtension.a platform

  • I then open a command prompt and run buildane.bat and Ottoman. My donkey is created. My generation file now has the following files in it:
    • buildane.bat
    • EchoExtension.ane
    • EchoExtension.swc
    • EchoExtension.swc.zip
    • extension. XML
    • libEchoExtension.a
    • Library.swf

  Now that I have my swc, donkey and it's time to create my sample application that will be used to test my new extension.

  • I go back to my D:\src\EchoExtension folder and go to the folder app ealier, I created.
  • I then create a new flash project called EchoExtensionTester.fla
  • I open the action script settings, paths to library and add the CFC I created in my D:\src\EchoExtension\lib\build file to my project.
  • On my stage, I create a field called text txtInput, a field of dynamic text named txtEcho, and a couple of buttons called btnClear, btnRuntime and btnEcho
  • I open the first layer of the timeline, and place the following code:

  imports of base.

  import flash.desktop.NativeApplication;

  import flash.events.MouseEvent;

  import flash.text.TextField;

  import the extension of our swc.

  import com.extensions.EchoExtension.EchoExtension;

  the value of our input text to the need the softkeyboard field

  txtInput.needsSoftKeyboard = true;

  Add event handlers to our buttons.

  btnEcho.addEventListener (MouseEvent.CLICK, btnEcho_Click);

  btnClear.addEventListener (MouseEvent.CLICK, btnClear_Click);

  btnRunTime.addEventListener (MouseEvent.CLICK, btnRunTime_Click);

  create our variable expansion.

  var ext:EchoExtension;

  Try

  {

  initialize our extension of echo.

  Ext = new EchoExtension();

  } catch (error) {}

  txtEcho.text = 'Error when trying to create new EchoExtension:\n\n' + e;

  }

  Stop();

  Delete the text echo field

  function btnClear_Click(e:MouseEvent):void

  {

  txtEcho.text = "";

  }

  just to test, put the latest version of the air runtime in our text field, so we can make sure we run air 3.0

  function btnRunTime_Click(e:MouseEvent):void

  {

  txtEcho.text += "\nRuntime version =" + NativeApplication.nativeApplication.runtimeVersion; ".

  }

  call the extension, passing all that is in the text input field and get back and place it in our text echo field

  function btnEcho_Click(e:MouseEvent):void

  {

  txtEcho.text += "\n";

  Try

  {

  txtEcho.text += ext.echo (txtInput.text);

  } catch (error) {}

  txtEcho.text += "\nError call ext.echo:"+ e;»

  }

  }

  • I save the project, Open Air for the parameters of the iOS, then perform the following settings: (Yes, I know... I'll have to use adt to perform the build, but I need to first create the swf file)
    • File: EchoExtensionTester.ipa
    • AppName: EchoExtensionTester
    • Version 1.0
    • Landscape
    • Full screen on
    • Auto orientation is disabled
    • GPU rendering
    • device: iPad and iPhone
    • RES: high
    • Deployment: I use my certificate and profile provisionging that I use for my main project (that works) and defined for the test of the device.
  • I close the window and save again... but before I publish, I opened newly created "EchoExtensionTester - app.xml" which is located in my app folder.
  • I add the extensions <>< extensionID > com.extensions.EchoExtension < / extensionID > < / extensions > to the XML in the file so now it looks like this:

  <? XML version = "1.0" encoding = "UTF-8" standalone = 'no '? >

  " < application xmlns =" http://ns.Adobe.com/air/application/3.0 ">

  <>Extensions

  < extensionID > com.extensions.EchoExtension < / extensionID >

  < / extensions >

  < id > EchoExtensionTester < /ID >

  < versionNumber > 1.0 < / versionNumber >

  < file_name > EchoExtensionTester < / name of the file >

  < description / >

  <!-to locate the description, use the following format for the description element. < description > < text XML: lang = "fr" > App English description goes here < / text > < text XML: lang = "fr" > French App description goes here < / text > < XML text: lang = "ja" > Japanese App description goes here < / text > < / description >->

  < name > EchoExtensionTester < / name >

  <!-to locate the name, use the following format for the name element. < name > < text XML: lang = "fr" > insert here the name App English < / text > < text XML: lang = "fr" > insert here the French App name < / text > < XML text: lang = "ja" > insert here the Japanese App name < / text > < / name >->

  < copyright / >

  < initialWindow >

  < content > EchoExtensionTester.swf < / content >

  standard < systemChrome > < / systemChrome >

  < clear > false < / transparent >

  < visible > true < / visible >

  true < fullscreen > < / full screen >

  landscape of < aspectRatio > < / aspectRatio >

  GPU < renderMode > < / renderMode >

  < maximizable > true < / maximizable >

  < minimizable > true < / minimizable >

  < resizable > true < / resizable >

  < autoOrients > false < / autoOrients >

  < / initialWindow >

  < icon / >

  < customUpdateUI > false < / customUpdateUI >

  < allowBrowserInvocation > false < / allowBrowserInvocation >

  < iPhone >

  < InfoAdditions >

  <! [CDATA [< key > UIDeviceFamily < / key > < table > < String > 1 < / string > < string > 2 < / string > < / array >]] >

  < / InfoAdditions >

  < requestedDisplayResolution > top < / requestedDisplayResolution >

  < / iPhone >

  < / application >

  • I save the changes to the xml file and return to Flash. I then publish.
  • The swf file is created as it should be, but then I get the error message:

  Error creating files.

  A native implementation extension 'com.extensions.EchoExtension' required by the application is not found for the target platform.

  • Now, while it is a pain in the rear, I again, this was going to happen because in my reading tutorials and samples, they have all said that you use adt to build the ipa... but that is fine... all I wanted anyway, was the swf, which I now have in my app folder.
  • I close flash because I no longer need and I create a new batch file: (Note: I have change the name of the cert, profile and password for this post)

  CLS

  "D:\SDKs\AirSDK30\bin\adt" - package - target the ipa-ad-hoc - stores pkcs12 - keystore "D:\src\mycert.p12" - storepass MYPASSWORD-putting into service-profile "D:\src\myprovfile.mobileprovision" "EchoExtensionTester.ipa" "EchoExtensionTester - app.xml" "EchoExtensionTester.swf" - extdir... / lib/Build

  Set dummy = p

  ECHO done

  • I then open a command window in my app folder and run build.bat.
  • I wait about 2 minutes...
  • ...
  • ...
  • YAY! My ipa file was created without error reported so far... Time to copy this bad boy to the iPad and see what happens.
  • I opened iTunes, drag "EchoExtensionTester.ipa" to the applications, then synchronize my device...
  • ...
  • YAY! iTunes installed ipa on the device... and there is a white icon bright and shiney for Echo Extension tester...
  • I open the app... and...
  • nothing.
  • I'm waiting for
  • still nothing.
  • I go to the bathroom.
  • I'll be back... still nothing... just a black screen.
  • I press the home button on the iPad, the app minimized, I restore it... nothing... black screen.

  management of human resources. Time to do some trial and error to see if I can figure out what the distribution.

  • As a test, I opened my fla and I comment out the following lines:
    • Ext = new EchoExtension();
    • txtEcho.text += ext.echo (txtInput.text);
  • I then rebuild the swf... get the same error (don't care)... I then rebuild the ipa using the batch file... and reinstall it on the device when it is made.
  • Exactly the same thing...
  • I opened the xml file... and remove the < extensionID > com.extensions.EchoExtension < / extensionID > line, save and re - run the batch file again... Wait for the ipa ends, then run it on the device.
  • I start the program on the iPad and it starts perfectly... with the exception of the commented line of code actually create and call the extension, everything works as it should. The runtime on the device reports as 3.0.0.4080
  • A test, I opened the .fla save and uncomment the 2 lines, I commented out above... keep the xml file extensionID, I re - publish the ipa... of course, this time, it actually creates the flash API, because the id of the extension is not in the xml file.
  • I put the file API with the extension in place on the ipad code... The fire and make the txtInput text and press the button of the echo. I get the following error:
    • Error calling ext.echo: TypeError: Error #1009
  • I suspect it's because I failed to include the extension in the descriptor... but when I build it with the extensionid in the xml file, I just get a black screen. I'm 99% sure that the context of the extension in the ext object is null (because that's what happens when I run Flash debug without extension lines in the xml)

  And here I am stuck.

  Can someone tell me what I am doing wrong or what I forgot to do?

  Thank you.

  Hi can check you if the CFC of the native extension is linked as external?

  Next image can help locate and change the link type of CFC.

  

  The issue that many people face here (i.e. extension works fast/interpreter mode and only when they are packed in standard mode) occurs only when the SWC of the NE is not linked externally.

  I hope this helps.

  Kind regards

  Mathyas blabla

  IOS of the AIR

• I can't update Flash player. What I am doing wrong?

  I can't update Flash player. What I am doing wrong?

  I currently have version 21, 22 version is the latest.  I get.

  "Adobe Flash Player could not be installed."

  I did the troubleshooting steps below. Everything is good, as I can tell.

  https://helpx.Adobe.com/Flash-Player/KB/enabling-Flash-Player-Firefox.html

  My Shockwave Flash is set, 'always on '.

  I ran the Adobe flash installer which seems to be successful. Then, I tried a new facility, still no joy.  (He did remove Flash Player version 21, now I have nothing.)

  Suggestions appreciated

  Firefox could block Flash because of security concerns.

  Because of security problems in older versions, Apple has

  updated the web plugin blocking mechanism to disable all

  earlier versions of Flash Player, 22.0.0.192 and 18.0.0.360.

  Information on web blocked plug-ins will be posted to:

  http://support.Apple.com/en-us/HT202681

  The question you should ask is why you have Flash installed. You don't need Flash. If you have not installed Flash, videos will play in HTML5. If the video requires Flash, you can use Google Chrome to play.

  From Sierra, Safari will be is more said websites common plug-ins are installed. It does this by not including not information on Flash, Java, Silverlight and QuickTime

• I got a Apple Watch yesterday and since put in place and paired him and everything, but now I can not unlock it or look at anything on the watch because it won't let me.  Any ideas as to what is wrong or what I am doing wrong?

  I got a Apple Watch yesterday and since put in place and paired him and everything, but now I can not unlock it or look at anything on the watch because it won't let me.  Any ideas as to what is wrong or what I am doing wrong?

  Hello

  If you have not already done so, it could be that you want to configure your watch with these settings:

  -On your iPhone, in the application of Eve, go to: My Watch (tab) > General > detection of wrist - it lights up.

  -On your iPhone, in the application of Eve, go to: Watch My > password > code turn on (choose a password Simple or more complex).

  -Also on the password settings screen, select Unlock with iPhone.

  After putting on your wrist, your watch don't unlock then after whatever you do first: unlock your watch manually (by entering the access code) or unlock your iPhone.

  Then, it will remain unlocked (including when the screen is idle) until you remove it from your wrist. When you remove your watch, it locks automatically.

  More information:

  https://help.Apple.com/watch/#/apd748b87e2a

• My Airport Extreme is connected to a cable modem from Arris Surfboard, overtime, I try to set up it tells me that I am not connected to the Internet if I use a router TP - Link AC1750 can I connect is not my ISP. What I am doing wrong?

  I followed the instructions on how to set up my Airport Extreme, but he says that I am not connected to the internet.

  I can connect with a wireless router TP-Link is not a problem with my service provider. I want to connect with my Airport Extreme.

  What I am doing wrong?

  What exact model of the modem Arris do you have? Is your service provider Internet Cox, by chance?