M40-133 Bluetooth - Belkin F8T001 V1

Similar Questions

• Satellite M40 - 114 bluetooth systemboard question

  Hi all

  I have question regardin my bluetooth and the motherboard.

  Center of Service Toshiba has replaced the motherboard in my laptop.
  I can't turn on my bluetooth for the replacement of the motherboard. FN + F8 doesn't work and bluetooth stack reports ' bluetooth device is not ready ". reinstalled XP via orginal Toshiba CD-ROM. But does not help.

  I discovered something strange, is that in the software sis sandra 2005, my laptop is reconignezed by satellite A40 PSA40U. They replace the motherboard with an old model? This could be the reason why the bleutooth no longer works?

  Your help/advice is necessary. Thanks in advance

  Hi phyl

  As much as I know Satellite M40-114 doesn't have Bluetooth and I can't understand this before the replacement of the Board of Directors the Bluetooth system was on board. I know that the M40-193 has a Bluetooth.
  Please check this topic http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=5071. There is an interesting discussion on the M40 and Bluetooth.

  Good bye

• Satellite M40-133: problem starting after a stop

  When my Satellite M40 - 133 EN if I start it again all that I get is the Toshiba welcome screen.
  If it is left for a while it will start as usual. When executing it is quite hot.

  Help, please.

  To me, this looks like a problem with overheating.
  It seems that the laptop can not start and start properly due to high internal temperature.

  The main reason why an overheating problem is very simple.
  Don t cooling modules work correctly. In my view, that dust and debris prevent cooling with maximum performance running fans.

  Simply cleaning fan should help you.
  From time to time, I clean my fans too. I use a jet of compressed air. These sprays are very useful to get rid of dust and most computer/computer laptop dealers offer these sprays.

  If it will not improve the situation, then a mobile technician needs to disassemble the laptop and recommended to clean properly. In addition, it should renew the thermal grease that is placed between the CPU and the cooling module, too.

  Good luck

• Satellite M40-185 - Bluetooth is not ready - can not use

  I have the Satellite M40-185

  I cann't use bluetooth. The problem is:
  At the opening of all programs--> Toshiba--> bluetooth--> bluetooth settings--> selection of menu bluetooth--> add new connection, a pop up appears with a msg "Bluetooth is not ready", then the bluetooth icon appears in the status bar.

  BUT I still cann't use Bluetooth.

  ALSO, when I open--> open device Bluetooth PCMCIA card Manager, a window appears with a button asking me to install a program.

  What is it and where can I find it?
  Do you think that this is the problem?

  In your case, I recommend using a simply external USB Bluetooth key.
  It of easy to use and the installation is very simple.

• M40-136 without wireless/Bluetooth/printer

  Hi all

  New new without wireless/Bluetooth and the Machine.

  Have the machine wireless to connect to the Internet.Works fine.
  However I have an Epson Photo printer, which is compatible with a Bluetooth adapter that is available only to Epson, M40 my bluetooth is possible Bluetooth by adding a Dongle?
  By adding the Bluetooth capability to M40 it would cause problems with the wireless connection?
  I want to only use BTooth for printing.

  Need to do this, that we're heading where space is limited and I don't want to run wires everwhere!

  NB. post is in both wireless and bluetooth forums

  Help!

  Hello

  You can use the USB stick Bluetooth and if the configuration is just to avoid any problems. Please check if Toshiba Bluetooth stack is already installed on your device. If so you can use it for the Bluetooth connection.

  I use the WIFI and Bluetooth on my Tecra and it works perfectly. Use of Bluetooth has no influence on the WIFI connection and you can continue to use it.

  Good bye

• Satellite M40 - cannot boot from the recovery cd after format HARD drive

  Hello

  After my Satellite M40 - 133 being affected by the virus of security internet I had to wipe my hard drive. The virus wouldn't let me do anything, boot without failure or system restore. I wiped the disk and it still wouldn't load up. That's why I had to do a full erase of the disk including the hidden partition.

  After doing his now do not let my boot from the CD of restoration as it says invalid partition as his search for files that must be on the hidden partition. What can I do to get it started. I'm not bothered about to recover anything on the disc. If I remove the hard drive and put the recovery cd in, it excludes the disc and begins to start until he fails to see the hard drive.

  Outwardly I can link the drive to another pc and he sees it as a storage device so I'm glad that there is nothing wrong with the hard ware - help please

  Hello

  Can you see the HARD drive with all the details in the BIOS?
  If this isn't the case, then this means that the HARD drive is faulty or not fully compatible.
  If you can see the HARD drive in the BIOS, then this means that the HARD drive is compatible.

  But this should not affect booting from a bootable CD.
  Even if the HD would not be recognized in the BIOS, you should be able to boot from the CD. For example a live Linux CD has not only any disk HARD because the BONE would not be installed on the HARD drive, but it loads into RAM.

  The question is; Why you are unable to boot from any CD?
  Maybe the discs are scratched or the CD/DVD drive cannot read the disc more because of problems of laser lens
  If possible, try to copy/burn the Windows CD using another computer, and then try to start using the copied disc.

• Cannot use BT on my Satellite M40

  Hello

  I have a problem with my bluetooth on Satellite M40 PSM42 bluetooth not working not one is impossible to uninstall the present on unisntall Control Panel programs, the same thing happens when I install the new version 5.10.12 bluetooth Toshiba stack, error said...
  isn't the E: Unit and complete the installation or uninstall the bluetooth stack.

  I need help, I can not connect my cell phone to bussines.

  Thank you for all.

  Alejandro

  Try this:
  Take out the battery-BT.
  Open Notepad and enter the following lines:
  REM remove BT-stack now
  MsiExec.exe /x "{CEBB6BFB-D708-4F99-A633-BC2600E01EF6}" / SB
  REM Reboot now!
  Shutdown - r f t 15
  Save the file under "BT - remove.bat".
  Double-click on it to run and wait for the system to reboot.
  This may take several minutes.

• Compatibility of SONY Micro stereo system

  My Sony hi-fi system features a docking cable that has mounted my iPhone 3, allowing me to play my entire collection of digital radio with ease. However, I now have an iPhone 4s, which of course does not fit into the recess of the dock. SONY claim to not have done all these devices to fit the new iPhones, so I'm a little stuck. Can someone tell me if there is some kind of adapter that is in a docking station iP3 and present an interface suitable for iP4S, or even 5s? Thanks in advance for any help.

  Doubt it these docks had a horrible specialists you can use find they seemded even sometimes stop working with ios upgrade, you can get a key electronics bluetooth belkin cheap enough that fit into any auxiliary input

• Bluetooth/infrared M40-152

  Hi people!
  My girlfriend bought justg one M40-152. How do you turn on the infrared device? (are there any)
  Same question for the bluetooth device. The Manager has always said that the device is not ready.

  Help, please!
  Thank you very much
  Andreas

  Hello

  According to the specifications of this laptop, it doesn't have infrared or Bluetooth.

  Good bye

• Satellite M40, Bluetooth & infrared problem

  Salvation of the experts;
  I have this laptop TOSHIBA Satellite M40, but I can't tell where the IR is that the software is already installed.
  Also when I turn wireless mode, when I start the Bluetooth wireless file transfer USING a message pops up saying: 'it's not about blutooth!

  Can you help me please... ?

  Hello

  Check your Bluetooth forum http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=5069 topic.

• Satellite M40, Bluetooth & infrared

  Salvation;
  I have the new laptop TOSHIBA Satellite M40, but I can't tell where the IR is that the software is already installed.
  Also when I turn wireless mode, when I start the Bluetooth wireless file transfer USING a message pops up saying: 'it's not about blutooth!

  Can you help me please... ?

  Hello

  Please check this topic http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=4873.

  Good bye

• How do I start bluetooth on Satellite M40-184

  Hello
  I bought a new Satellite M40 and I found that I have the Bluetooth Manager, but it does not show me the that Bluetooth at all besides it still gives me the message "Bluetooth device is not ready" even when my bluetooth is turned on! Kindly let me know how to solve this problem, as I have been through the whole pages of starting Instructions and possible help, but nothing seems to work. Thanx

  Imran

  Hello Imran

  It will be interesting to know what unit should be connected to your device (mobile phone, printer). I hope that use you the FN + F8 key combination to activate the Bluetooth connection. If the Bluetooth connection is enabled you can start a wizard and search for other Bluetooth devices.

• Bluetooth and Satellite M40

  I have a question:

  My M40-265 Satellite has had the opportunity to connect with other machines of Bluetooth?
  If this is not the case, how can I do this? How it would be to handle this?

  Nick

  Hello

  Unfortunately, there is no Bluetooth this device.
  In this case, you can use a Bluetooth USB adapter or an of Bluetooth PCMCIA card.
  For example:
  http://www.EverythingUSB.com/hardware/index/Belkin_Bluetooth_USB_Adapter.htm

  Good bye

• Satellite M40-225: confused about Bluetooth

  You just bought a Satellite M40-225. Checked forum for issues of bluetooth but, to be honest, I got a little confused!

  Basically I want to use bluetooth and guess I need some kind of adapter. Suggestions? Need to download drivers or anything like that too?

  More... (!), I have a PowerMac G5 and airport network wireless broadband BT Yahoo. Is it possible to connect my new PC to a network of MAC - or is it the Devil's own work?

  Thank you

  Hello

  Satellite M40 has no Bluetooth. This means that you must buy a USB BT's key. It's not expensive and installation is very simple. Usually, if you buy the one that you will get the software CD. Before installing any software, check if your unit has installed Bluetooth stack.

  I'm sure you will find battery Bluetooth for Windows by Toshiba V3.10.00 on your device. In the control panel check Add and Remove Programs option. List all the installed components.

  Good luck!

• M40-298: Question about Bluetooth headset support?

  Toshiba m40-298 does support Bluetooth headset? Thank you

  Hello

  As far as I know Toshiba supports just clean products. I put t know which product you have but M40 has no BT and you must buy the headset with USB BT key.