I can't program my new remote control sony model rm - ez4 to my comcast cable box

Similar Questions

• Programming of the remote control

  I am able to program the buttons on the remote without problem but I have more than 60 deployed MD and would like to be able to program them all at once.  Is there a way to the DMM to write an application of advanced task that will program the remote button?

  Thank you

  Al

  Alan,

  
  

  Here's a technical tip I wrote on the programming of the remote control through the

  a HTTP mib.  Just create a task advanced under the task system

  for each color button.  Test & check if it works on a single DMP first and

  then send task for each color button to all of the DMP.  Once it is

  finished make sure you that you SAVE the configuration.

  
  

  If this answers your question, take the time to mark this

  discussion answered & rate the answer.

  
  

  Thank you!

  
  

  T.

  
  

  
  

  ******************************

  
  

  You can use DMP MIBs to reconfigure the DMP Remote Buttons. VARIABLES =========   admin           = DMP Web Account Username   default         = DMP Web Account Password   a.b.c.d         = IP Address of DMP   dmm.company.com = FQDN of the Digital Media Manager(DMM) Appliance MIBS ==== ** Use the Following MIB to see the CURRENT Remote Mappings https://admin:[email protected]/* */:7777/get_param?p=*.*&init.pop_enable=false ** Configure Buttons RED https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */Dwww.cisco.com%22 GREEN https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */MD%3Dhttp://www.google.com%22 YELLOW https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */_CMD%3Dhttp://www.yahoo.com%22 BLUE https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */%3Dhttp://www.apple.com%22 ASSIGN A BUTTON TO CAST https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */Dhttp://dmm.company.com:8080/etv-flash-webapp/app/etv_24_.htm%22 ** Use the Following MIB to see the NEW CONFIGURED Remote Mappings https://admin:[email protected]/* */:7777/get_param?p=*.*&init.pop_enable=false ** Save NEW CONFIGURED Remote Mappings on DMP    -> Use the ADVANCED TASK to SAVE the DMP Settings.    -> or Directly on the DMP using the DMP-DM Web Admin    -> or HTTP MIB          ie.          https://admin:[email protected]/* */:7777/set_param?mib.save=1          https://admin:[email protected]/* */:7777/set_param?mib.save=1&mng.reboot=1 

• I have Vista and I can not program to open my Control Panel control or office told me application not found

  I have Vista and I can not program to open my control panel or office

  For Windows Vista file association problems
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  You probably have an association bad .exe. Try the fix for this.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Can not program the new flash player

  My printer is a brothers DCP 375CW and I can't program the new flashplayer because I have to delete Brccmctl I would appreciate it if you could help me.

  Elizabeth Simoes

  You don't need to 'eliminate' Brccmctl; just close it.  See how close Internet Explorer and other programs that run on Windows?

• Remote control Sony TV QWERTY

  I have a Sony KDL46EX710 LED backlit TV and Blu - Ray Sony home entertainment system and both are WiFi enabled for internet TV and music. I have a real pain to have to enter the words and others using the digital key to scroll through the letters and other. Y at - it remote control, Sony or spare parts, which has a qwerty keyboard that I can use instead of using the number keys. Thank you.

  Sony makes a keyboard QWERTY Bluetooth for the Playstation 3 and Playstation support as just about any what keyboard & USB mouse... It is time other products Sony (Bravia TV & Blu - ray), get aboard too & evolve...

• Can I string my new imac to 2015 to my imac 2007. What cable should I use (read: I'm illiterate cable).

  Can I string my new iMac to 2015 to my iMac 2007. What cable should I use (read: I'm illiterate cable).

  Hi, Daisy Chain in what way, exactly, do you mean so the iMac 2007 may be in target disk Mode so the newest can use its drive?

  If so, you need a lightning to Firewire adapter...

  http://www.Apple.com/shop/product/MD464LL/A/Apple-Thunderbolt-to-FireWire-ADAPTE r

  And a FW/800<->FW800 cable...

  http://eShop.MacSales.com/item/NewerTech/1394B99036/

• Where can I find the new tab controls, not wheel

  I can't change the new tab to display the tiles.

  You can watch the pref browser.newtab.url the topic: config page and set this pref to the URL of your preferred the new tab page.
  You can use these special pages or set the pref to the URL of your preferred the new tab page.

  • the new default tab with the tiles page is on: newtab
  • the default homepage is Subject: Home
  • to a blank page, you can use Subject: vacuum

  The pref browser.newtabpage.enabled must be set to true to use the page defined through browser.newtab.url like the new tab page.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved

• p: 6910 6910 p with built in infrared: can I use an infrared remote control?

  I have a laptop HP 6910P that has the Infarred Port on the front of the machine. Running ultimate 7 64 Windows Device Manager but says the drivers are installed and the device is functioning properly.

  I have a remote that I would use on this laptop but the deosn distance seem to be seen by the IR from the IR port. Don't know how the built in IR port work... you have to turn it on to see the remote control?

  IR remotes use another channel than IR networking which is kind of a lost thing of days past. We used to make transfers of IR of PDA files for computers laptops back in the day, but it was something different than IR remotes. Look in your control panel and see if you have an icon of wireless... This is where you configure infrared file transfers. Infrared has been 'Wireless' before there was wifi.

• Where can I get the cover of the batteries for the remote control Sony NSG - MR1?

  We have missed placed our battery cover for the NSG - MR1 remote for the Internet/Blue Ray player. Where can I get this part alone?

  You can contact an authorized Sony part distributors to check if the lid is available for purchase. Here is their contact information.

  Andrews Electronics Inc.
  661-257-7700.
  www.andrewselectronics.com

  Encompass parts Distribution
  800-638-3328.
  www.encompassparts.com

  Fox International
  440-725-7150.
  www.Fox-international.com

  If my post answered your question, please mark it as an "accepted Solution".

• Can I use the new remote and SIRI to select HomeVideo movies on my iMac

  I have more than 1,000 movies from my personal library on the hard drive of my iMac. In the past, the only way to select one was to scroll, scroll and scroll up to what I got. I was told I could use SIRI to ask for the film. When I tried, it chose the Apple or Netflix movie but ignored my Home Video option... I ask something not supported?

  Siri is currently no visibility to personal media.

  Research on your Apple TV (4th generation) - Apple Support

  When you are looking for content with Siri or the application of the research, the Apple TV checks these content providers, with more to come soon:

  • United States: Film and television shows in iTunes, HBO GO HBO NOW, Hulu, Netflix, SHOWTIME, SHOWTIME anytime
  • Australia, Canada, France, Germany and United Kingdom: movies and television shows available on the iTunes Store and Netflix
  • Other countries and regions: movies in iTunes

• Can I order remote control for my 1.5 to PAIN. E TV?

  Hello

  I just want to know how where can I buy / order a remote control for my tv... shop or if it is not possible.
  Is there a cure for all?

  Thanks in advance, in hopes of a solution to this issue...

  As far as I know this product is originally shipped with the remote control.
  Is your defective remote or what?

• Remote control RM-YD057

  Anyone know the code to program the STB to a DirecTV HR34-700 key?

  Thank you for your post and welcome to the forums.

  I'm sorry you have problems programming new remote control to control your DirecTV STB.

  have you tried the codes that are listed in the i-manual? The i-Manual key is located on the remote control and can see the quick guide. It lists codes by manufacturer.

  You can also access the manufacturer codes here:
  http://eSupport.Sony.com/us/Perl/model-... l = RMYD057 #.

  Thank you

• Other remote controls for 4 Apple tv

  Hello

  I recently got a 4th gen apple tv.

  I find the new remote control very difficult being that I'm visuakky with impaired faculties.

  Does anyone know if the offer from apple or a sell a more tactile remote control like the old TV one of its customers with disabilities

  I live in the United Kingdom

  Thank you

  In my view, it is possible to use the previous remotes ATV with ATV 4. Of course, you'll be without Siri and the trackpad, but it is very convenient.

  You can also form a multisystem remote sends the commands of the ATV. Note that the distance of Siri transmitted via bluetooth, but ATV 4 has an IR receiver also.

  I use my remote TV with HDMI-CEC, allowed on television. The volume must be disabled on the ATV. It works by sending commands via the HDMI cable connecting ATV to all. It is intended to allow the control of a DVD player with the TV remote control. The direction of the arrow keys and enter replace the trackpad button, while back works as a Menu. Haven't found a substitute for the Home button, however. Now, HDMI-CEC varies according to each model and manufacturer, but you may find that you already have the remote you are looking for. On your game, HDMI-CEC will be called * Net or * link; still another denomination.

• Apple TV (3rd generation) remote control suddenly stopped working

  I used aluminum remote on my 3rd generation Apple TV for years without a single issue.  Then last night, after working fine most of the evening, it simply stopped working.  The first thing I did was to get the distance within two feet of the Apple TV, and then I was able to make it work.  To me, this indicates a battery is weakening, so I replaced it.  Same problem: Apple TV does not remotely, unless I get very, very close.  Just in case, I got a new battery, I tried a second.  Same question.

  I did a bit of digging in the community forum, and here's what I've tried:

  -restarted successfully the Apple TV via the software and then again just unplug the power cord and wait 10 seconds, but the problem persists.

  -successfully paired and re-paired remote control, but the problem persists.

  ATV shows a solid light when I push buttons, unless I come to this beach to two feet and then it flashes once as her answers ATV.

  I have looked on the IR through the camera of my iphone, but don't see any red flashes... and yet the ATV receives the signal from the remote control if it is close enough.

  Curiously, as part of my diagnosis, I noticed that the "UP" button had become insensitive, even from the beach which work the other buttons.

  I have not dropped the remote or mistreated it somehow, so can't see why it would break suddenly without reason.

  I'm puzzled.

  Your troubleshooting sound research.

  I would buy a new remote from Apple and try it.  They are $19.00.  If she is doing the same, the receiver IR of the ATC is responsible and return the new remote control within 14 days for a full refund.

  If it works keep the remote control.

• Cut the legends of Netflix closed with new remote

  With the new Apple TV and the new remote control, I can't figure out how to cut the subtitles on Netflix.  I know how to do it with the old remote control.  Any ideas?

  Slide down, then on audio...