I can't run this INTAL-Inst4TWN of security remotely on windows 7, but it works on XP/Vista, a help?
I can't run this INTAL-Inst4TWN of security remotely on windows 7, but it works on XP/Vista, a help?
Contact the vendor of the program and ask them if it's compatible with Windows 7.
Tags: Windows
Similar Questions
-
First of all, I need to know how to stop the automatic updates, second how to replace him "you can't run this program on this pc? I SWEAR THAT IF HE SAID THAT HE AGAIN THAT I WILL BREAK IT INTO PIECES. Then I'll go buy an android tablet. Surface, hate hate 8
Yes running of programs that are not on the store is not possible. It is not a parameter or artificial, it's just that the RT line uses what is called an ARM chipset, also known as RISC (Reduced Instruction Set Chip). Literally, he cannot read the compiled code of complete programs. Same reason you can't run Adobe Photoshop on an iPhone, just CPU cannot decode the program. But on the good side of things, it cannot launch virus either, so he made the first version of Windows that cannot get 'gunked up' over time. It works like an iPad and have a continuous and consistent performance for a lifetime. I'm sad that they abandoned it so fast, I know a lot of people who could use this service.
Anyway, you can skip the connection at startup. There is in fact in two ways. Unless you do a lot of "full stops", I recommend enter Power Options and setting by turning off the "password required when you wake up sleep." Which will remove the requirement for password of sleep/wake, but if the device never complete a boot will always be a password. This is a good compromise for safety and security, so if the device is lost or stolen, it eventually crashes when the battery is dead.
But if you want to delete this, you should be able to do it by running the command NETPLWIZ, as described here: https://www.youtube.com/watch?v=sOYmY-6Wd3Y
-
can anyone run this script?
Hi all
in order to proceed to a reconfiguration of the alarm, I need to get metricId of an alarm by default,
the problem is, then from a previous test I accidentally deleted some of these alert, so I have to manually recreate but I can't find the metricId that match.
So, in order to help me, can someone run this script:
$Name = "unable to connect to the storage.
$alarmMgr = get-view AlarmManager
$alarms = $alarmMgr.GetAlarm ($null)
$alarms | %{
$alarm = get-view $_
If ($alarm.Info.Name - eq $Name) {}
"Write-Host-object' * $alarm.Info.Name:"-nonewline
Write to $alarm.Info.Name
Write-Host-object' * $alarm.Info.Expression.Expression [0]. "Metric:"-nonewline
Write $alarm.Info.Expression.Expression [0]. Metric
Write-Host-object' * $alarm.Info.Expression.Expression [0]. "Metric.CounterId:"-nonewline
Write $alarm.Info.Expression.Expression [0]. Metric.CounterId
Write-Host-object' * $alarm.Info.Expression.Expression [0]. "Metric.Instance:"-nonewline
Write $alarm.Info.Expression.Expression [0]. Metric.Instance
}
}
First of all, as is the case, a second time with $Name = "host error.
and one last time with $Name = 'high-availability Cluster error. "
The result of these commands will help me a lot to get my alarm
Thanks in advance to anyone who can help me
Here you go (host)
and (cluster HA)
____________
Blog: LucD notes
Twitter: lucd22
-
I have just upgraded to Windows 7. But whenever I turn on my computer, he wants to support me on my user account name before completely loading windows. How can I stop this and simply load in thank you Windows.
Hi UKuser7,
Welcome to Microsoft Answers Forum.
Automatic logon is disabled in Windows 7 by default for security reasons. If it is enabled, anyone who can physically access the computer can also gain access to everything on the computer, including the networks that it is connected.
This setting is only recommended for cases where the computer is physically secure.
To set up Windows 7 to connect to the desktop automatically, follow the steps below.
1) click Start , and then enter the following command in the start search box:
Netplwiz
2) press ENTER.
This opens the Advanced user accounts Control Panel window.
(3) in the users tab, uncheck the box next to users must enter a user name and password to use this computer.
4) click apply at the bottom of the user accounts window.
(5) when the newspaper automatically on the dialog box appears, enter the user name for which you want to automatically connect to Windows 7. Then enter your password in the two areas where it is requested.
6) click on the OK button.
7) click OK in the window user accounts to complete the process.
Thereafter, your PC at startup, Windows 7 will be automatically connect.
Ticket back for your comments and concerns.
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think
-
We are running the latest Labview 2010 on new computers (Windows 7) but have more older/more old material NI ELVIS (NI ELVIS I?).
LabVIEW works very well and the device drivers are installed.
What NI ELVIS software move us?
The latest version indicates that it is for ELVIS II and III hardware.
Thank you
Hi Tom,
I'm sorry, I read your first post completely backward. It's the pilot , you should try. Sorry for the confusion!
Kind regards
-
I have xp as my operating system. But ineed as my os vista please help me in doing so, that is that I need a CD or can I download for free im of the India
There is no Vista free download legal available.
Buy online since: newegg, amazon, etc.
Or try your local computer store to buy Vista.See you soon. Mick Murphy - Microsoft partner
-
I can't run this update (KB978601___
I can't install this update update security for Windows 7 for x 64-based systems (KB978601)
Download size: 204 KB
You may have to restart your computer for this update is taken into account.
Update type: Important
A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.
More information:
http://go.Microsoft.com/fwlink/?LinkId=184933Help and Support:
http://support.Microsoft.comBear7777,
What is the error you get when you try to install this update?
You can check your update history and get the error code for the update failed:Open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.
In the left pane, click view update history.
Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.
Clean boot your PC, and then run Windows Update.
Perform operations of KB883825
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
How can I run this program?
I tried to download the online YuGiOh game so I can play with other people, but after I download the Setup Wizard from the wizard does not in fact. It was just my authorization then does nothing. How can I run the name of the file is yo2setup_20081120v.exe
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx
Windows Vista Compatibility Center
First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
If this is not Vista compatible, read the info on the link above.
It works for some programs, but not all.This applies to software programs, NOT hardware drivers.
If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe
O run as admin.
See you soon.
Mick Murphy - Microsoft partner
-
I accidentally shut down my computer for an update. Now I can only get a blue screen with a message saying that a problem has been detected and I need to disable or uninstall any anti-virus, backup utilities or disk defragmentation. He told me to check my hard drive configuration and to search for updated drivers. Then it is said to run CHKDSK /F to check for hard drive corruption. The technical information is: 0 x 00000024 (0 x 00190203, 0x8638c6c8, 0xc0000102, 0x00000000). I can't run Windows in safe mode, I can't seem to run in its final configuration, nor can I get it to go to a command prompt - it just goes back to the blue screen. I also tried to put in my XP disc that came with the computer, and it helps not at all either.
Unfortunately, the Microsoft Answers forum still does not prompt for any kind of information system when a new question is asked, so we don't know anything about your system. Not knowing the basic information a problem prolongs the frustration and the agony of these issues.
Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time. It might even be possible to solve a problem in a single response when enough information is provided.
I think I'm about to lose hope on this fantastic.
The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).
These can cause corruption in the file system that must be fixed before you do anything else.
If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).
There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.
Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do. Or, you are welcome to just start trying things that might work.
Boot into the Recovery Console Windows using an XP bootable installation CD.
If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.
This is not the same as recovery disks that may have come to a store to purchase the system.
You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.
The ISO bootable image file you need to download is called:
xp_rec_con. ISO
Download the ISO from here:
http://www.mediafire.com/?ueyyzfymmig
Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:
Here are some instructions for ImgBurn:
http://Forum.ImgBurn.com/index.php?showtopic=61
It would be a good idea to test your bootable CD on a computer running.
You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive. These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.
When you start on the CD, follow the instructions:
Press any key to boot from CD...
Installing Windows... going to pronounce.
Press 'R' to enter the Recovery Console.
Select the installation that you want to access (usually 1: C:\WINDOWS)
You may be asked to enter the password (usually empty).
You should be in the folder C:\WINDOWS. It's the same as the
C:\Windows folder that you see in Solution Explorer.
The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.
For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:
A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.
In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.
Running chkdsk is fine, even if he finds no problem. It won't hurt anything to run it.
Assuming your boot drive is C, run the following command:
CHKDSK C: /r
Let chkdsk finish to correct the problems, he could find.
It may take a long time for chkdsk complete or they seem to be "stuck". Be patient. If the HARD drive led blinks always, chkdsk is something. Keep an eye on the amount of the percentage to be sure that it is still making progress. It may even seem to go back sometime.
You must run chkdsk/r again until it finds no error to correct.
Remove the CD, and then type "exit" to exit the RC and restart the computer.
You have not to set the BIOS to boot the disk HARD since the CD won't be.
-
Can I run a service at regular intervals with the Windows Task Scheduler?
Hai...
I want to run a service on a regular basis. I was thinking about tasks windows schedular system. I want to know if it is possible to define the intervals of time explicitly windows Task Scheduler. I also want to know if we can choose a custom event if selected the option "when an event is logged. Your help will be very appreciated. Thanks in advance
Hi SreedeviB,
You can run a service at regular intervals with the Windows Task Scheduler.
For more information, you can consult the following articles:
Automate tasks with Task Scheduler
Hope this information is useful.
-
Can you run Firefox 21 rather than Firefox nightly on Windows 8?
I was wondering if you can run the standard version of 21 Firefox on Windows 8?
You can. However it does not support Metro on windows 8
-
I don't want to go to earn 10 - I've heard too many problems. I'm ready to upgrade to win 8 or 8.1 if it means I get a legitimate copy of windows
See more of Diagnostic report.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation code: 0
Code of Validation caching online: 0xc004c4ab
Windows product key: *-* - X92GV - V7DCV-P4K27
The Windows Product Key hash: aU2z1/fnhnLHmhBm699qYZT2E6s =
Windows product ID: 00426-OEM-8992662-00400
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {39925E49-B133-4F66-B5AD-313D699A1FC4} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Ultimate
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.151230 - 0600
TTS error:
Validation of diagnosis:
Resolution state: n/a
Given Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002
OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002
OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowed
Analysis of file data-->
[File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7600.16385], Hr = 0x800b0100
Other data-->
Office details:
{39925E49-B133-4F66-B5AD-313D699A1FC4} 1.9.0027.0 6.1.7601.2.00010100.1.0.001 x 64 *-*-*-*-P4K27 00426-OEM-8992662-00400 2 S-1-5-21-2595295314-2542787543-4225730385 Corporation Sony VGC-RT100Y American Megatrends Inc.. R0215T2 20090902000000.000000 + 000D94A3007018400F8 0409 0409 Time(GMT-08:00) Standard Pacific 0 3 HPQOEM SLIC-MPC 109 Content Spsys.log: 0 x 80070002
License data-->
Input error: can not find script file "C:\Windows\system32\slmgr.vbs '.
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: not registered - 0x80070005
Output beyond bitmask:
--> HWID data
Current Hash HWID: NgAAAAEAAgABAAEAAQACAAAABAABAAEA6GFeeXrS2FDET5CjxF2wENabrO + LNoiqlLsihUxY
Activation 1.0 data OEM-->
N/A
Activation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC Sony VAIO
FACP Sony VAIO
HPET Sony VAIO
MCFG Sony VAIO
SLIC SLIC-MPC HPQOEM
OEMB Sony VAIO
GSCI Sony VAIO
SSDT Sony VAIO
The date of manufacture of your system is around September 2009, which means that your system might have are preinstalled with Windows 7, but another edition such as the home edition Premium or Home Basic edition.
Check at the bottom of the laptop or in the battery compartment to confirm the version and edition of Windows which initially is preinstalled on your laptop, then the answer here with your findings.
-
Can I run MalWare Antibytes alongside Microsoft Security Essentials?
can I run anti-malware bites anti-malware alongside microsoft security essentials
Wednesday, September 26, 2012 00:15:24 + 0000, ErnestMellor wrote:
can I run anti-malware bites anti-malware alongside microsoft security essentials
What is "anti-malware bites"? Do you mean MalwareBytes AntiMalware?
Yes, you can run them both.
Ken Blake, Microsoft MVP
-
Hi guys. IV already bought a year of CC and have it on my iMac. I now like it on my Mac book pro as well. How can I do this? I think I can have it on both machines at the same time
Hi Clint,.
Please refer to the help documents below to download the application Adobe CC:
Download, install, update or uninstall applications
Terms of license: licenses and terms of use | Adobe
Kind regards
Sheena
-
How can I install the drivers if I'm still in administrative mode? Is there a setting to turn off somewhere?
Hi pfunk20000,
Thanks for posting. Hold Left Shift and right click on the installer of catalyst and select "run as". From there, you can select administrator. Set the local administrator password and it should install without any problems.
I hope this helps! Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
Maybe you are looking for
-
Is it possible to upgrade Windows XP 32 bit to Windows 7 64 bit?
Original title: Windows 7 I have a Windows XP 32-bit SP3. I also have a computer laptop vista 64 bit that I've upgraded to Windows 7 64 bit. two years later it crashed. I read on the internet the other day that Microsoft would cease to support XP. M
-
Cannot get th SP 2 Serivce Installation Package. get an error 80073712
Why can't I get sp2 service batch to load? I get an error 80073712.
-
Bug when you set the text of a TextInput in MXML
Hello I upgraded my Playbook Tablet OS version 2.0.0.6149 previous beta (I think it was 2.0.0.4xxx). Since then, my application written in Flash Builder 4.6 target AIR 3 fails when I put the text into a TextInput in MXML. The MXML code is: ID = "freq
-
Can I download my images on my desktop in jpg or png format?
HelloI got my neglected Dollar Photo Club account at adobe (which I believe adobe their redeemed)! It was very easy to download my images on my desktop in jpg or png format, I now have credits in adobe and tried to download, but the format seem to be
-
Hi there, although I was using cs5 for 2 years and this week I need to format my pc, once I did.I tried to install my photoshop to find out I lost my key, I still have the box, cd, the serial number at the bottom, but not the registration key.I don't