I can't simulate my app - net_rim_barcodelib module not found

Similar Questions

• Satellite A105-S2051: common Module not found. This configuration will be terminated

  Hello

  I installed Windows XP but when I try to install any utility (like the Hotkey Utility) I get the message:

  TOSHIBA common Module not found. This configuration will be terminated.

  I can't find the "Toshiba ACPI common Modules for Windows XP" on the Toshiba web site. I tried the web site in English,

  I tried every single link in the support for the Satellite A105-S2051 page.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  There is nothing like the Module 'common '.

  I have lived a great incredible waste of time while searching for the reader.

  So please, any help would be welcome.

  Hello

  I found Toshiba ACPI common Modules for Windows XP (Toshiba value-added Logic Device) in some different sets of Satellite A105.

  For example: A105-S271 A105-S2711 A105-S361 A105-S3611, A105-S2719, A105-S2712, A105-S2713, A105-S2716, A105-S2717

  Go for no apparent reason the A105-S2051 is not there.

  However, try the Toshiba ACPI common Modules of different A105.

  Maybe the latter won't work.

• module not found wireless (701)

  Please, help me to solve this problem.
  After that I did the diagnostic system, I get message "wireless module not found (701).
  and when starting my laptop, the screen just showed HP logo and start back to the HP logo.

  Hello

  Please try this.

  Disconnect the power sector and battery that no accessories must be connected to your laptop. Then press and hold the power button on your device for 15 to 30 seconds then plug the battery & power checking if the unit works fine.

  If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

• Specified module not found: UNICOWS. DLL

  Cannot connect on MSN out of the blue. Error message "" specified module not found: UNICOWS. "." DLL.

  (2) MS technicians were not able to solve the problemm?

  Hello

  Remember to make changes to the computer before the show?

  You can uninstall MSN Messenger and download again.  This will help you solve the
  problem.

  How to change or remove a program in Windows XP
  http://support.Microsoft.com/kb/307895

  To reinstall MSN Messenger, follow this link:
  http://Windows.Microsoft.com/en-us/Messenger/home

  If this does not help, you can look after your query using MSN.
  https://support.MSN.com/contactus.aspx

  http://Messenger.MSN.co.in/help/

• MODULE NOT FOUND ERROR MESSAGE

  TRY TO UNINSTALL NORTON SECURITY 2007-MAKE ERROR SPECIFIED BY MESSAGE MODULE NOT FOUND
  HOW CAN I GET RID OF NORTON SO I CAN INSTALL ANOTHER PROGRAM? GOD, VISTAS SUCKS

  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  Download and run the above Norton removal tool.

  If you continue to have problems with it, contact Norton:

  http://www.Symantec.com/en/AU/Norton/support/index.jsp

  See you soon. Mick Murphy - Microsoft partner

• JVM and Module not found error

  Hello.

  When I run my application, as soon as the Load Simulator shows JVM error 104 ClassCastException, and then tap home screen to eception exception Java.lang.ClassCastException.

  If I open my application I get JVM error 104 but saying RuntimeException, and if I keep a popup says error start MyApp: Module not found net_rim_ui_api.

  I even tried to launch a simple application of HelloWord and get the same errors. Reinstalled the Simulator, still nothing.

  Anyone have any ideas?

  Thanks in advance.

  If you are using the Eclipse plugin, and then you expand the node for the project in the Package Explorer, you should see a library item JRE System, the version of the JRE System why you compile. You can change the JRE version by right-clicking on the JRE System Library, then select "Properties".

  If you use BlackBerry JDE, use the editor that comes with the 4.6.1 distribution JDE.

• Error: "FATAL: oracleasm Module not found" in Red Hat 6

  Hi all:

  ... OS: Red Hat 6.5 (64-bit)

  I am preparing to install a 12 c CARS in a Red Hat 6.5. When you configure the ASMLib, I got the following error when executing "/ usr/sbin/oracleasm init:

  2 May 18:23:20 oraprd01 modprobe: FATAL: Module not found oracleasm.

  I configure YUM Oracle filing and the package installed the "kmod-oracleasm. And in the link (Oracle ASMLib downloads for Red Hat Enterprise Linux Server 6) I got the packages 'oracleasmlib' and 'oracleasm-support', as you can see below:

  [root@oraprd01 binarios] # rpm - qa | grep oracleasm-i

  kmod-oracleasm - 2.0.8 - 4.el6_6.x86_64

  oracleasm-support - 2.1.8 - 1.el6.x86_64

  oracleasmlib - 2.0.4 - 1.el6.x86_64

  My kernel is:

  2.6.32 - 431.el6.x86_64 oraprd01 Linux #1 SMP Sun Nov 10 22:19:54 IS 2013 x86_64 x86_64 x86_64 GNU/Linux

  My version of Red Hat is:

  [root@oraprd01 binarios] # cat/etc/redhat-release

  Release of Red Hat Enterprise Linux Server 6.5 (Santiago)

  Why am I the above error while trying the oracleasm module init? WHat am I hurt?

  
  

  Thanks in advance.

  Problem solved.

  I installed an earlier version of the kmod-oracleasm (kmod-oracleasm - 2.0.6.rh1 - 3.el6_5.x86_64) downloaded from the customer portal of Red Hat. Now the ASM is responsible.

• Satellite L300 - 11L - TOSHIBA common module not found

  Hello
  I have a model Satellite L300 - 11L
  I try to install the operating system XP drivers
  Hotkey utilities for display devices
  I have an error pops up: "TOSHIBA common module not found!" This configuration will end. "

  I ask you to help and support.
  Thank you

  Hello

  I think the error message is quite clear.
  Common modules driver is not installed and so you cannot install the Hotkey utility.

  The common Modules is a crucial driver to be installed at the beginning!

  Therefore, you should visit the European driver of Toshiba. Need to select your model laptop and download this common Modules.
  Install it and then repeat the installation of the Hotkey utility.

  See you soon

• nilsdev - nimdbgk Module not found

  Hello

  I just installed a PCI-6509 and NOR-DAQmx 8.0.2 on SUSE Linux. I intend to use the ANSI-C drivers in a C++ application. I have not installed LabVIEW.

  I started working my way the Configuration Guide, mainly to check that I had installed everything correctly and have reached the point where nilsdev is executed. On the surface, everything seems to install OK.

  When I run nilsdev I get the following error:

  FATAL: Module not found nimdbgk.

  Is how important it?

  Of course, it does not nimdbgk, but it doesn't look like it has been installed.

  In usr lsmod | grep or returns

  nipalk

  Nation

  lspci is the map of NOR (but he seems to have the wrong number on, not sure if it is a problem)

  05:01.0 class ff00: National Instruments devices 7085.

  Part of LabView nimdbgk is why I don't have it?

  All you have ideas?

  Thank you.

  Hello

  I am not that kind of information officially, but I would speculate that it would be in version 8.9.

  «NOR-DAQmx added support for 64-bit user mode in NOR-DAQmx 8.9 (ANSI C) and NOR-DAQmx 8.9.5 (ANSI C, LabVIEW 2009 and .NET Framework 3.5).» This now allows the development of 64-bit application on 64-bit operating systems during development for a 64 bit (ADE) Application development environment. »

  The outputs by the trend that has occurred with Windows basic drivers, what would be my best guess.

  There are a few forum posts that indicate that people have had DAQmx working on x 64 systems, but with the extension of the - m32 for compilations, this isn't really 64 bit.  Unfortunately, the positions are open and do not contain really any resolution as such.

  For example this or that.  I just searched "DAQmx Linux 64-bit".

  I hope it helps a bit.  I'm sorry that I don't have a definitive answer.

  Kind regards

• who can I synchronize if my device is not found I have a HUAWEI M735

  who can I synchronize if my device is not found I have a HUAWEI M735?

  have you tried putting your phone into mass storage mode and then connect your device to the pc?

• Latitude ON "Flash Module" module not found on initialize to top

  I recently reformattedand partitioned my hard drive in order to install Win7 64 bit (installed with Win7 32 bit).  After installing all the drivers, firmware updates successfully and the software, I am unable to access the Latitue feature on.  In addition, at boot or start the Setup application, I get a 'Flash Module not found' error.

  

  Looks like a ready Boost error.

  "first introduced with Windows Vista in 2006 and also included with Windows 7. It works by using flash memory, drive USB 2.0, SD card, CompactFlash or any kind of portable flash mass storage system as a drive for disk cache. »

  Otherwise, it must refer to the Adobe Flash software that would need to be reinstalled.

  Adobe Flash Platform * update Flash Player to support access Flash

  Note: For versions prior to version 10.1 Flash Player, use the support updating mechanism in previous versions of the player (manual download and install from www.adobe.com or ExpressInstall). In addition, the AIR installer manages the necessary updates for Flash Access and does not support the SystemUpdater API.

  
  

• How can I downloaded an app that is not in the App Store

  Different is an application that I found on the internet that is not in the App Store. But whenever I try to download... .it does not work... How can I download this app

  You do not have.  Cannot install iOS Apps devices from anywhere, but the App store.   If it is not in the App Store, the app is very probably not designed for iOS and would not be able to be run in any case.

• "Error starting Module not found" add external jar to eclipse plugin

  Hello

  I use the eclipse on Eclipse 3.4 plugin

  BB JDE 4.5

  8300 Simulator

  I'm trying to run a Midlet that sucessfully runs in eclipse for another smartphone (Samsung).

  The project compiles fine, but when I run it in the BB Simulator, it gives me the error:

  "error at startup MyApp: Module ' kxml2 - 2.3.0' not found."

  I added a jar for kmxl in the form of external jar file.

  Sometimes it get lost, don't know why. I had to add the jar file several times because once so that it cannot compile and it disappears from the list of libraries.

  In any case, the major problem is that he cannot run in the Simulator.

  I found several posts with the same problem, but the solutions they gave are JDE, not eclipse plugin.

  These solutions were to create a new project, made a library of BB and understand the project as a dependency in the main application.

  But how to solve the problem in plugin eclipse?

  Why add a pot as an external library is not enough?

  Why get lost from time to time?

  If we are to create a new project (it seems excessive to me thinking) how can we define everything in eclipse?

  Thank you

  Anna

  Check this thread.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=22240#M22240

  Concerning

  Bika

• Error starting of DPS App Builder - Application not found

  WTF people.

  This morning I opened my document (CS5) and he said that I should update my folio tools (Needless to say I hate it to be forced to do an update before I can start working).

  Well, I do an update, these two tools (tools of producer and Folio Builder).

  Now, there seems to be a few changes, I can't update my folio via the menu more. At the time to choose the new 'building app' - option I get an error:

  "An error occurred when starting of DPS App Builder. The App-Builder DPS application not found"(translated).

  Original German version: "Beim Starten von DPS App Builder ist ein Fehler aufgetreten. Wurde die DPS App Builder application non found. »

  All Solutions? Where to find the mysterious "Application App-Builder"?

  Edit: Refresh is now possible within the folio as it seems.

  App Builder is nothing else than a new name to Viewer Builder. Download go DPS.

• grtnat.dll module not found... Help!

  I got rid of the problem fjof.sto but now I get the grtnat.dll modlule is not found.  Everytime I open Outlook it stops right and says: "error Outlook. Cannot open Outlook.  What is going on?

  Wednesday, June 30, 2010 19:05:28 + 0000, Palcouk wrote:

  Your PC is infected with who knows what, you need to use both a decent AV and Malaware detection apps

  An explanation here:
  First of all, fix what is probably just a typo, it isn't 'malware'
  "malaware."

  Secondly, despite what many people think, 'malware' does not mean that spyware
  in particular. The word "malware" is short for "malicious software".
  It refers to all types of malicious software, including viruses,
  worms, Trojans, rootkits, spyware, adware, horses etc. So there is never
  any reason to talk about 'virus and malware' since 'malware '.
  includes viruses.

  Moreover, the word 'virus' means 'software self-replication. A
  program auto-répliquant don't have to be malicious in intent, but
  for all purposes, all viruses are malicious and therefore
  classify malware.

  So, what you really mean is to use decent anti-virus and
  Anti-spyware detection applications. I agree with you and this is
  My recommendations:

  For an anti-virus program, I recommend eSet NOD32, if you're ready
  to pay for it. If you want a free anti-virus, I recommend one of the
  three of the following:

  Avira
  Avast
  Microsoft Security Essentials

  You also need anti-spyware software. I recommend that you download and
  (both freeware) to install MalwareBytes AntiMalware and
  SuperAntiSpyware.

  Ken Blake