grtnat.dll module not found... Help!

Similar Questions

• Error message saying "c:\windows\system32\fadcaxoi.dll specific module not found" help?

  Whenever I start my pc (Windows XP Home Edition, ed), this message pops up. If I click on it goes and everything seems to work ok but obv there is a problem.

  I tried to restore windows disk problem persists

  Thanks in advance for any help

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there are over 70,000 and new threats are detected every day.  Always update your virus definitions before running a scan.

  Restart your computer and solve the outstanding issues.

• LogiLDA.dll module not found error at startup.

  Original title: RunDLL error on startup?

  When a journal on my laptop, I see a weird RunDLL dialog box that says:

  There was a problem starting C:\Windows\System32\LogiLDA.dll

  The specified module could not be found.

  That this has something to do with my laptop, or a program?

  I've never noticed something wrong with my laptop lately, just this stupid dialogue box every time you start...

  I have a TOSHIBA laptop with windows 8 on it.

  Hi Ian,

  Please contact Logitech technical support for help in the installation of the Logitech Download Assistant.

   

  http://Logitech-en-AP.custhelp.com/app/answers/detail/A_ID/32423/tabs/ * / cl /, en

  If you have other questions about Windows operating systems, please contact us on this forum. We are happy to help you.

• SHConds.dll MODULE not FOUND

  I'm sure I have SOME HOW to REMOVE ITS FILE (SHConds.dll), BUT WHEN I TURN MY MACHINE I HAVE ALWAYS THIS ERROR. IS THERE A WAY TO REPLACE OR FIX IT.

  Thank you

  MEL

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or:

  ·                                You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform quick scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• Specified module not found: UNICOWS. DLL

  Cannot connect on MSN out of the blue. Error message "" specified module not found: UNICOWS. "." DLL.

  (2) MS technicians were not able to solve the problemm?

  Hello

  Remember to make changes to the computer before the show?

  You can uninstall MSN Messenger and download again.  This will help you solve the
  problem.

  How to change or remove a program in Windows XP
  http://support.Microsoft.com/kb/307895

  To reinstall MSN Messenger, follow this link:
  http://Windows.Microsoft.com/en-us/Messenger/home

  If this does not help, you can look after your query using MSN.
  https://support.MSN.com/contactus.aspx

  http://Messenger.MSN.co.in/help/

• Module C:\windows\oyimeteq.dll is not found

  To start my computer displays a box with this:

  Module C:\windows\oyimeteq.dll is not found

  This can be corrected?  I am running Windows XP

  Hello

  References to Vista also apply to just use XP start - run instead of start - search.

  If you still get the error message once you have done a thorough check of the malware and did the
  cleaning as shown in the answer above.

  How to troubleshoot a problem by performing a clean boot in Windows Vista (or XP)
  http://support.Microsoft.com/kb/929135
  How to check and change startup on Vista (or XP) programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• module ivuxoqoya.dll is not found

  On startup, I get this error message with a "appdata".  I cleaned my disk and it still appears and a drive next to my pointer just keeps turning.  The full message is the module ivuxoqoya.dll is not found

  This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  Post your question in the forum Windows here: http://answers.microsoft.com/en-us/windows/forum

  It sounds like malware to me.  This module is not part of what Google can locate.

• Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!

  has recently had to restore my old computer. When I try to play games on facebook its telling me to install adobe flash plyer x. but it will not be installed. Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/Dirext-x-file-d3d9dll-is-missing-Baz/2c639497-CFBA-4C6D-9155-f946f8dc1a45

  It will be useful.

• installed age of empires won't get mess Granny2 dll is not found can help you

  installed age of empires won't get mess Granny2 dll is not found can help you

  Hello

  (1) what is the exact full error message?

  (2) what version of Age of Empires you referring?

  (3) have you downloaded the game from internet or installed using the disc?

  Try to reinstall the game.

  You can also ask your question in the framework of forum Games for Windows, please see the following link:

  http://forums.Xbox.com/GFW/technical_support/f/253.aspx

• Satellite A105-S2051: common Module not found. This configuration will be terminated

  Hello

  I installed Windows XP but when I try to install any utility (like the Hotkey Utility) I get the message:

  TOSHIBA common Module not found. This configuration will be terminated.

  I can't find the "Toshiba ACPI common Modules for Windows XP" on the Toshiba web site. I tried the web site in English,

  I tried every single link in the support for the Satellite A105-S2051 page.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  There is nothing like the Module 'common '.

  I have lived a great incredible waste of time while searching for the reader.

  So please, any help would be welcome.

  Hello

  I found Toshiba ACPI common Modules for Windows XP (Toshiba value-added Logic Device) in some different sets of Satellite A105.

  For example: A105-S271 A105-S2711 A105-S361 A105-S3611, A105-S2719, A105-S2712, A105-S2713, A105-S2716, A105-S2717

  Go for no apparent reason the A105-S2051 is not there.

  However, try the Toshiba ACPI common Modules of different A105.

  Maybe the latter won't work.

• Satellite L300 - 11L - TOSHIBA common module not found

  Hello
  I have a model Satellite L300 - 11L
  I try to install the operating system XP drivers
  Hotkey utilities for display devices
  I have an error pops up: "TOSHIBA common module not found!" This configuration will end. "

  I ask you to help and support.
  Thank you

  Hello

  I think the error message is quite clear.
  Common modules driver is not installed and so you cannot install the Hotkey utility.

  The common Modules is a crucial driver to be installed at the beginning!

  Therefore, you should visit the European driver of Toshiba. Need to select your model laptop and download this common Modules.
  Install it and then repeat the installation of the Hotkey utility.

  See you soon

• L10 start problem - "SHDOCVW.dll is not found.

  When I start my laptop there is a message 'SHDOCVW.dll is not found' instead of icons on the desktop and I can't use my laptop more. Please help me cause I'm new user only. Thank you to.

  Hello

  Check it please this page http://www.pcfixtool.com/dll-errors/2339/2/required-shdocvw-not-found.html

  I hope this will help you understand what is happening. You can try to start the machine in safe mode by pressing F6, while the unit will start and try to install a new copy of the file manually. Check out this page http://www.ascentive.com/support/new/support_dll.phtml?dllname=shdocvw.dll

  You will find a brief explanation how to do this.

  Good luck!

• module not found wireless (701)

  Please, help me to solve this problem.
  After that I did the diagnostic system, I get message "wireless module not found (701).
  and when starting my laptop, the screen just showed HP logo and start back to the HP logo.

  Hello

  Please try this.

  Disconnect the power sector and battery that no accessories must be connected to your laptop. Then press and hold the power button on your device for 15 to 30 seconds then plug the battery & power checking if the unit works fine.

  If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

• Tecra M9 - TPSMain.exe cannot start because CpePerf.dll was not found

  Hi and help,

  searched the Web and found other discussions of the forum with similar questions.
  Tried all suggestions, nothing worked. I'm not very good on the computer but you can find my way. In any case...

  After connection messge pop messages - up in succession, similar to: TPSMain.exe cannot start because CpePerf.dll was not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found

  Computer works very well but Power Saver start is not automatic and can't select it from the Panel... "" Toshiba power saver does not work. "
  so select the power options... "could not start because the CpuPerf.dll is not running.
  Did all the research on the net and followed all the tips... i.e. unistall saving in safe mode, uninstall toshiba common utility can uninstall fatal error 0x7e

  Then download Ccleaner, inspections, uninstall with Ccleaner same fatal error.
  In support of Toshiba and tried to install Power Saver... same problem will not install.

  Thus help help help if possible.
  Computer works well but popping up messages are annoying and I'd love to sleep to extend battery.

  Tried the system restore, even though I doubt that it affects the files... Another problem "cannot complete system restore"... tried this several times and cannot restore the system either... What is happening?

  any help please
  Tim

  Hello

  I think you can solve this problem, recover the laptop.
  But that would mean that the whole HARD disk should be formatted and would be installed everything again, I put t know if this is an option for you

  It turns out that something will not with the Toshiba Power Saver installed and, consequently, the popup message.
  Usually new installation of GST should help. But it was not and I m wondering why

  Maybe this is s question really an OS since system restore help (to the previous state) didn t

  He s strange question right now I can suggest only a new recovery

• nilsdev - nimdbgk Module not found

  Hello

  I just installed a PCI-6509 and NOR-DAQmx 8.0.2 on SUSE Linux. I intend to use the ANSI-C drivers in a C++ application. I have not installed LabVIEW.

  I started working my way the Configuration Guide, mainly to check that I had installed everything correctly and have reached the point where nilsdev is executed. On the surface, everything seems to install OK.

  When I run nilsdev I get the following error:

  FATAL: Module not found nimdbgk.

  Is how important it?

  Of course, it does not nimdbgk, but it doesn't look like it has been installed.

  In usr lsmod | grep or returns

  nipalk

  Nation

  lspci is the map of NOR (but he seems to have the wrong number on, not sure if it is a problem)

  05:01.0 class ff00: National Instruments devices 7085.

  Part of LabView nimdbgk is why I don't have it?

  All you have ideas?

  Thank you.

  Hello

  I am not that kind of information officially, but I would speculate that it would be in version 8.9.

  «NOR-DAQmx added support for 64-bit user mode in NOR-DAQmx 8.9 (ANSI C) and NOR-DAQmx 8.9.5 (ANSI C, LabVIEW 2009 and .NET Framework 3.5).» This now allows the development of 64-bit application on 64-bit operating systems during development for a 64 bit (ADE) Application development environment. »

  The outputs by the trend that has occurred with Windows basic drivers, what would be my best guess.

  There are a few forum posts that indicate that people have had DAQmx working on x 64 systems, but with the extension of the - m32 for compilations, this isn't really 64 bit.  Unfortunately, the positions are open and do not contain really any resolution as such.

  For example this or that.  I just searched "DAQmx Linux 64-bit".

  I hope it helps a bit.  I'm sorry that I don't have a definitive answer.

  Kind regards