Latitude ON "Flash Module" module not found on initialize to top

Similar Questions

• Satellite A105-S2051: common Module not found. This configuration will be terminated

  Hello

  I installed Windows XP but when I try to install any utility (like the Hotkey Utility) I get the message:

  TOSHIBA common Module not found. This configuration will be terminated.

  I can't find the "Toshiba ACPI common Modules for Windows XP" on the Toshiba web site. I tried the web site in English,

  I tried every single link in the support for the Satellite A105-S2051 page.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  There is nothing like the Module 'common '.

  I have lived a great incredible waste of time while searching for the reader.

  So please, any help would be welcome.

  Hello

  I found Toshiba ACPI common Modules for Windows XP (Toshiba value-added Logic Device) in some different sets of Satellite A105.

  For example: A105-S271 A105-S2711 A105-S361 A105-S3611, A105-S2719, A105-S2712, A105-S2713, A105-S2716, A105-S2717

  Go for no apparent reason the A105-S2051 is not there.

  However, try the Toshiba ACPI common Modules of different A105.

  Maybe the latter won't work.

• Satellite L300 - 11L - TOSHIBA common module not found

  Hello
  I have a model Satellite L300 - 11L
  I try to install the operating system XP drivers
  Hotkey utilities for display devices
  I have an error pops up: "TOSHIBA common module not found!" This configuration will end. "

  I ask you to help and support.
  Thank you

  Hello

  I think the error message is quite clear.
  Common modules driver is not installed and so you cannot install the Hotkey utility.

  The common Modules is a crucial driver to be installed at the beginning!

  Therefore, you should visit the European driver of Toshiba. Need to select your model laptop and download this common Modules.
  Install it and then repeat the installation of the Hotkey utility.

  See you soon

• module not found wireless (701)

  Please, help me to solve this problem.
  After that I did the diagnostic system, I get message "wireless module not found (701).
  and when starting my laptop, the screen just showed HP logo and start back to the HP logo.

  Hello

  Please try this.

  Disconnect the power sector and battery that no accessories must be connected to your laptop. Then press and hold the power button on your device for 15 to 30 seconds then plug the battery & power checking if the unit works fine.

  If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

• nilsdev - nimdbgk Module not found

  Hello

  I just installed a PCI-6509 and NOR-DAQmx 8.0.2 on SUSE Linux. I intend to use the ANSI-C drivers in a C++ application. I have not installed LabVIEW.

  I started working my way the Configuration Guide, mainly to check that I had installed everything correctly and have reached the point where nilsdev is executed. On the surface, everything seems to install OK.

  When I run nilsdev I get the following error:

  FATAL: Module not found nimdbgk.

  Is how important it?

  Of course, it does not nimdbgk, but it doesn't look like it has been installed.

  In usr lsmod | grep or returns

  nipalk

  Nation

  lspci is the map of NOR (but he seems to have the wrong number on, not sure if it is a problem)

  05:01.0 class ff00: National Instruments devices 7085.

  Part of LabView nimdbgk is why I don't have it?

  All you have ideas?

  Thank you.

  Hello

  I am not that kind of information officially, but I would speculate that it would be in version 8.9.

  «NOR-DAQmx added support for 64-bit user mode in NOR-DAQmx 8.9 (ANSI C) and NOR-DAQmx 8.9.5 (ANSI C, LabVIEW 2009 and .NET Framework 3.5).» This now allows the development of 64-bit application on 64-bit operating systems during development for a 64 bit (ADE) Application development environment. »

  The outputs by the trend that has occurred with Windows basic drivers, what would be my best guess.

  There are a few forum posts that indicate that people have had DAQmx working on x 64 systems, but with the extension of the - m32 for compilations, this isn't really 64 bit.  Unfortunately, the positions are open and do not contain really any resolution as such.

  For example this or that.  I just searched "DAQmx Linux 64-bit".

  I hope it helps a bit.  I'm sorry that I don't have a definitive answer.

  Kind regards

• Specified module not found: UNICOWS. DLL

  Cannot connect on MSN out of the blue. Error message "" specified module not found: UNICOWS. "." DLL.

  (2) MS technicians were not able to solve the problemm?

  Hello

  Remember to make changes to the computer before the show?

  You can uninstall MSN Messenger and download again.  This will help you solve the
  problem.

  How to change or remove a program in Windows XP
  http://support.Microsoft.com/kb/307895

  To reinstall MSN Messenger, follow this link:
  http://Windows.Microsoft.com/en-us/Messenger/home

  If this does not help, you can look after your query using MSN.
  https://support.MSN.com/contactus.aspx

  http://Messenger.MSN.co.in/help/

• MODULE NOT FOUND ERROR MESSAGE

  TRY TO UNINSTALL NORTON SECURITY 2007-MAKE ERROR SPECIFIED BY MESSAGE MODULE NOT FOUND
  HOW CAN I GET RID OF NORTON SO I CAN INSTALL ANOTHER PROGRAM? GOD, VISTAS SUCKS

  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  Download and run the above Norton removal tool.

  If you continue to have problems with it, contact Norton:

  http://www.Symantec.com/en/AU/Norton/support/index.jsp

  See you soon. Mick Murphy - Microsoft partner

• JVM and Module not found error

  Hello.

  When I run my application, as soon as the Load Simulator shows JVM error 104 ClassCastException, and then tap home screen to eception exception Java.lang.ClassCastException.

  If I open my application I get JVM error 104 but saying RuntimeException, and if I keep a popup says error start MyApp: Module not found net_rim_ui_api.

  I even tried to launch a simple application of HelloWord and get the same errors. Reinstalled the Simulator, still nothing.

  Anyone have any ideas?

  Thanks in advance.

  If you are using the Eclipse plugin, and then you expand the node for the project in the Package Explorer, you should see a library item JRE System, the version of the JRE System why you compile. You can change the JRE version by right-clicking on the JRE System Library, then select "Properties".

  If you use BlackBerry JDE, use the editor that comes with the 4.6.1 distribution JDE.

• Error: "FATAL: oracleasm Module not found" in Red Hat 6

  Hi all:

  ... OS: Red Hat 6.5 (64-bit)

  I am preparing to install a 12 c CARS in a Red Hat 6.5. When you configure the ASMLib, I got the following error when executing "/ usr/sbin/oracleasm init:

  2 May 18:23:20 oraprd01 modprobe: FATAL: Module not found oracleasm.

  I configure YUM Oracle filing and the package installed the "kmod-oracleasm. And in the link (Oracle ASMLib downloads for Red Hat Enterprise Linux Server 6) I got the packages 'oracleasmlib' and 'oracleasm-support', as you can see below:

  [root@oraprd01 binarios] # rpm - qa | grep oracleasm-i

  kmod-oracleasm - 2.0.8 - 4.el6_6.x86_64

  oracleasm-support - 2.1.8 - 1.el6.x86_64

  oracleasmlib - 2.0.4 - 1.el6.x86_64

  My kernel is:

  2.6.32 - 431.el6.x86_64 oraprd01 Linux #1 SMP Sun Nov 10 22:19:54 IS 2013 x86_64 x86_64 x86_64 GNU/Linux

  My version of Red Hat is:

  [root@oraprd01 binarios] # cat/etc/redhat-release

  Release of Red Hat Enterprise Linux Server 6.5 (Santiago)

  Why am I the above error while trying the oracleasm module init? WHat am I hurt?

  
  

  Thanks in advance.

  Problem solved.

  I installed an earlier version of the kmod-oracleasm (kmod-oracleasm - 2.0.6.rh1 - 3.el6_5.x86_64) downloaded from the customer portal of Red Hat. Now the ASM is responsible.

• Module not found in the Simulator

  Hi, I'm trying to convert a jar to .cob using Cap.

  When I run the .cob in the Simulator he tells me on the files inside the main .cob .cob was not found.

  But what inspect the content of the requested file .cob is there.

  At the moment I am compiling by using only the net_rim_api.jar to the classpath in a jar.

  Then the interference using only the net_rim_api.jar to the classpath.

  Then preverifying with the perverify.exe in the jdk 4.7

  Then, by running cap on the jar/jad...

  The code works fine with I use the JDE 4.7, but no I'm trying to get them to work in my chain of construction.

  Also if I obscures not I make check errors when running instead of module could not be found.

  Any ideas what would that a module is not there?

  Thanks for any input.

  Thanks for the help,

  I solved the problem now.

  The error is missing a file s/n, but the file of what it sought was actually there... IE appname - 6.cob inside the appname.cob

  When I stopped to obfusctating it disappeared, but I found myself with a verification error.

  Then change the version of virtual machine Java compilers to 1.2 instead of 1.4 correction of the error checking

• "Error starting Module not found" add external jar to eclipse plugin

  Hello

  I use the eclipse on Eclipse 3.4 plugin

  BB JDE 4.5

  8300 Simulator

  I'm trying to run a Midlet that sucessfully runs in eclipse for another smartphone (Samsung).

  The project compiles fine, but when I run it in the BB Simulator, it gives me the error:

  "error at startup MyApp: Module ' kxml2 - 2.3.0' not found."

  I added a jar for kmxl in the form of external jar file.

  Sometimes it get lost, don't know why. I had to add the jar file several times because once so that it cannot compile and it disappears from the list of libraries.

  In any case, the major problem is that he cannot run in the Simulator.

  I found several posts with the same problem, but the solutions they gave are JDE, not eclipse plugin.

  These solutions were to create a new project, made a library of BB and understand the project as a dependency in the main application.

  But how to solve the problem in plugin eclipse?

  Why add a pot as an external library is not enough?

  Why get lost from time to time?

  If we are to create a new project (it seems excessive to me thinking) how can we define everything in eclipse?

  Thank you

  Anna

  Check this thread.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=22240#M22240

  Concerning

  Bika

• I can't simulate my app - net_rim_barcodelib module not found

  Hello, I am developing an application that uses a qr scanner; I'm using as a guideline the example of bar code. When I simulate the last skd, such as 6.0 or 7.0 it is working very well. But when I simulate a 5.0 Simulator model 9300, my application cannot start because rise "startup error: module 'net_rim_barcodelib' not found.»

  I know that the library is not included in the SDK 5.0, but is anyway to fix this?

  PD: Sorry for my English...

  Hello

  Finally I could solve the problem. I forgot to say that I develop with JRE version 7.0, so that when the code source zxing, he throws me an error of definition doubles for the library. Then I made a downgrdate for JRE 5.0, include the zxing code and that implements the class mentioned previously.

  Thanks for your time and your help.

• grtnat.dll module not found... Help!

  I got rid of the problem fjof.sto but now I get the grtnat.dll modlule is not found.  Everytime I open Outlook it stops right and says: "error Outlook. Cannot open Outlook.  What is going on?

  Wednesday, June 30, 2010 19:05:28 + 0000, Palcouk wrote:

  Your PC is infected with who knows what, you need to use both a decent AV and Malaware detection apps

  An explanation here:
  First of all, fix what is probably just a typo, it isn't 'malware'
  "malaware."

  Secondly, despite what many people think, 'malware' does not mean that spyware
  in particular. The word "malware" is short for "malicious software".
  It refers to all types of malicious software, including viruses,
  worms, Trojans, rootkits, spyware, adware, horses etc. So there is never
  any reason to talk about 'virus and malware' since 'malware '.
  includes viruses.

  Moreover, the word 'virus' means 'software self-replication. A
  program auto-répliquant don't have to be malicious in intent, but
  for all purposes, all viruses are malicious and therefore
  classify malware.

  So, what you really mean is to use decent anti-virus and
  Anti-spyware detection applications. I agree with you and this is
  My recommendations:

  For an anti-virus program, I recommend eSet NOD32, if you're ready
  to pay for it. If you want a free anti-virus, I recommend one of the
  three of the following:

  Avira
  Avast
  Microsoft Security Essentials

  You also need anti-spyware software. I recommend that you download and
  (both freeware) to install MalwareBytes AntiMalware and
  SuperAntiSpyware.

  Ken Blake

• Latitude E6410 Mobile broadband device not found

  Hello

  Could you please help me

  I have an E6410, install the sim card, load and start the Service Manager Broadband Mobile and it say an error "device wide band not found Mobile".

  I already download and install drivers for Broadband Mobile Wireless, two of them (5620 and 5540 mini-map) I really do not understand how to determine which of them installed in my laptop. Y at - it an idea?

  Thanks in advance

  PS Sorry for my English

  Hello, I have the same problem, I used the Dell Mobile Broadband utility and run the self diagnostic, and the result was down: HardwareTest. I guess that the unit is not installed or not connected to the motherboard. How can I activate this device? There must be a setting in the BIOS, or something is not pluged in correctly for this laptop. also, mine is a Latitude E6410 with Win7.

  I saw no response for this post.

  Please, the USB Modem is very annoying.

  Best regards

  Juan Carlos

• Error message saying "c:\windows\system32\fadcaxoi.dll specific module not found" help?

  Whenever I start my pc (Windows XP Home Edition, ed), this message pops up. If I click on it goes and everything seems to work ok but obv there is a problem.

  I tried to restore windows disk problem persists

  Thanks in advance for any help

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there are over 70,000 and new threats are detected every day.  Always update your virus definitions before running a scan.

  Restart your computer and solve the outstanding issues.