I cannot change the name of the State structure of the State.

Similar Questions

• The former "cannot change the power state of virtual machine: the process has exited with an error: end of the error message" thing again (Fedora 8/Server 1.08)

  OK, this problem beautifully undescriptive I've seen caused by what seems to be dozens of things happening for me.

  I made the mistake of horrible update my FC8 kernel to the latest one (2.6.26.8 - 57.fc8).  Mind you, that's all that's changed.  It was with a 1.06 server with happiness and perfectly good computers running virtual in use before the upgrade.

  After the new kernel and reboot, I had to rebuild vmmod.  I had to get a fix of any - any later that I used with my previous kernel (116 does not solve the problem of compiling) so I used all-any117d.  Update like a champion.

  Try to turn on a VM and Ihanta!, the above error.

  Nothing else was changed.

  I tried the upgrade to VMware Server 1.08.  Used all-new any117d - update OK.

  Error again.

  I have re-run the compilation, this time to say 'yes' to what the installation script to "adjust the permissions of all virtual machines in xxxlist" or whatnot.

  Error again.

  1. status of /etc/init.d/VMware

  Networking networking on/dev/vmnet0 is running

  Invited only on/dev/vmnet1 network is running

  Network invited only on/dev/vmnet8 is running

  NAT networking on/dev/vmnet8 is running

  Responsible vmmon module

  Loaded module Vmnet

  FWIW, I compile as long as root, but have always run VMware server from my UID nonroot.

  What now?

  I'm in the same boat.  Fedora 8 2.6.26.8 - 57.fc8 #1 SMP

  I have tried uninstalling/reinstalling v1.0.6 thru 1.0.8 with all 116 updates and 117d.   117D compiles with every version of server but when I try to turn on a virtual computer I get this error.

  Cannot change the power state of virtual machine: the process has exited with an error:

  vmxvmdb: name of the Index generated by the configuration file

  POST (no connection): Version mismatch with vmmon module: expected 138.0, obtained 168.0.

  You have a bad version of the module kernel "vmmon.

  Try reinstalling VMware Server.

  POST (no connection): failed to initialize the surveillance apparatus.

  Failed to initialize the virtual machine.

  End of the error message.

  I found several posts other people have this problem but

  they are months with no recent activity and nothing that solved the problem.  I found appeared

  to get a fix, one updated the all an update that corrects the problem for

  2.6.26 performing several nuclei, but the link for the update on TI-psycho appears to be dead.  Here is the link to the discussion

  http://Fedoraforum.org/Forum/showthread.php?t=199026&page=2

  Of course, I would like to know how to solve this problem as well.

  Thank you

• Cannot change the folder name of the user, i.e. the C:\Users\user name (folder name)

  I got a new computer w/Windows 7, but Set - up guy was working on 2 computers and put the wrong name in this machine slot 'username '.  All seeking answers to correct (my machine automatically books with my ADMIN correct name but doesn't let me change an incorrect name in the USER file), I came across this on VISTA.  It also applies to Windows 7?

  "What you see is the reference in the"C:\Users\user name"folder. While you can change the registered owner and the name of the user account, you cannot change the name of the folder 'C:\Users\user name'. The only way to do this is to create a new admin account and delete the one in a new. »

  If the solution IS identical to that of Vista, the instructions on the following link apply?
  http://www.Vistax64.com/tutorials/93026-user-account-delete.html

  Yes, the solution is identical to that of Vista, and apply the instructions at this link.

  Create a new account with the correct name and delete the old account.  If you wish, save the old account during erasing files and copy them into the new account.

• Cannot change the power state of VM: internal error

  Hello

  I freshly installed OS elementary which is based on Ubuntu.

  VMWare Workstation installation worked fine, but after creating my new virtual machine with a Win 10, the same message comes to me:

  Cannot change the power state of VM: internal error

  I looked a little in the log file, found this dump was set to zero, they changed in etc/security /, but that's all I've managed to find.

  Here is my log file

  Thanks a lot for your help

  PS: I'm leaving a beginner in the Linux world, so explanation would be welcome

  Hello

  Welcome to the VMware community forums.

  I don't think that the problem is related to a beginner linux user, it's a problem triggered by a specific hardware configuration.

  If you look at your log file again, there is an error just before the vmware process attempts to core dump. The dump is a reaction to the problem.

  vmx| E105: PANIC: VERIFY bora/vmcore/vmx/main/timeTracker_user.c:238 bugNr=148722
  

  If you then put the bug number into google, you get:

  http://KB.VMware.com/kb/1227

  Which indicates in return you can set a configuration file to specify the actual frequency of your processor.

  Your processor is an Intel (r) Core i5-3570 CPU @ 3.40 GHz

  The linux variant of the config.ini file they speak on windows hosts is/etc/vmware/config

  --

  Wil

• Moved from VM with Snap Shots, doesn't start: cannot change the power state of VM: internal error

  Hello

  Last week, I decided to move from a Windows host based Linux system. So I went through my VMs their power off and copied to another drive. I then installed 7 Centos and reinstalled VMWare Workstation 12 re-imported the virtual machine in VMWare and I tried to start.

  I received the following message...

  "Cannot change the power state of VM: internal error.

  Suspicious, I looked at the folder that contains the machine virtual and noticed it contained snapshots. DOH!

  I guess it is pretty bad, not sure where to start?

  Any help would be appreciated.

  Thank you

  James

  I copied VM, with and without clichés, without problems. Have a few running on OSX Fusion so

  The first thing I would check would be for folders and .lck files. If so, remove them.

  Lou

• Cannot change the power state of VM: cannot...   (VMWare Workstation 7 on Debian Lenny)

  Hi all, I am new to this community. I recently installed VMWare Workstation 7 on a Debian Lenny (kernel 2.6.26.2 - amd64). I had no problem with it, but when I tried to start a Virtual Machine Windows Vista, which I created it, does not start. Error says windows "cannot change the power state of VM: could not find a peer valid to connect to". "" Any idea, please?

  Josber.

  It seems that the virtual machine has been suspended when your host is using a different screen resolution

  either change back to the resolution that you used when you suspenmded the machine virtual or delete the VMS.

  This will force the VM to do a cold boot

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Cannot change the name of the file in the file properties.

  Original title: Cannot change the file properties

  Some downloaded files have a value in the box "title" under the details (after clicking Properties)
  I can't remove this 'title' and it appears so when I share the file on my network.
  The file is located on a portable hard drive, but I tried to move some files from problem to my office to see if I could solve these problems there, but nothing has worked.

  I already have
  -taking possession of the object
  -allows full control for all users
  -tried to use the "attrib - r + s' function
  -among other...

  I just want to know if there is a way to change the details of the file. On another windows help page it says something along the lines of "some attributes cannot be changed" I hope this isn't the case.

  Any help at all would be great, if no additional information is needed let me know.
  Thank you

  This information is set when the file is created.  Windows has no native ability to change.  You need a third party program.  For example, see link below.  Note that I have no idea if it's any good or works in Windows 7.  Gives you the link just to get an example of what to look for.

  abcAVI Tag Editor
  http://abcAVI.kibi.ru/

• Cannot change the Apple ID

  I'm changing my Apple ID, but when I try to change ID, it does not show the ability to 'change e-mail address '.  How can I get that option?

  You cannot change the name of the device.

  Sign of your ID, then click on my Apple ID and change the ID (you can not change if it's an address to iCloud)

• Good for laptop - cannot change the ISP; keep returning to a previous provider

  Windows 7 laptop of my grandson, I'm migrating FIREFOX (excellent resource!) of my aging XP desktop. An existing Mozilla installation on the guarded device tries to connect to an ISP in Sydney (1000km) which kept out, I guess because the signal is too weak. Too far - on the Internet?

  Reinstalled my new ISP contact, reinstalled a fresh copy of Firefox, copied the old profile XP (just underneath the random string file name), but cannot change the fault. Firefox at startup tries to raise the old ISP (Sydney) and expires, and then allowing me to establish a manual connect with the ISP (my current) new.
  Perhaps a clue: in my Firefox troubleshooting info, change preferences, the browser start page is the address of 'old', with 'override mstone' ignore, what look like prints of registry entries, but I can't change all that - and maybe it's wise! An annoying secondary question: on arrival, the laptop listed no administrator user. So I am me came as an administrator, but I wonder if a past or current even Admin hidden could register (or other) entered resistant to change.

  Late discovery: the laptop is apparently infected with browser pirate btsearch.name. Search Google throws a series of removal procedures, and I'm now working through them.
  What Miss me?

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• Cannot change the Vista hosts file

  I started Notepad as administrator and open my hosts file, made my changes, but when I try to save it I get this message: cannot create the c:\windows\system32\drivers\etc\hosts file verify that the path and the name are correct

  How to save this file? Thanks for any help!

  Hello

  The host files are linked to the internet explore and this is why it must be very careful when you change them. And this is the reason why they were safe as to change. We have a FixIT tool to assign default host files. It's here.
  http://support.Microsoft.com/kb/972034 also, here is the article that explains how to change the host files and the Lmhosts file in Windows Vista and Windows 7. You cannot change the Hosts file or the Lmhosts file in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/923947

   

  I hope this information helps you!

• Cannot change the hosts file in Windows Vista Home Premium

  Posted on behalf of a client:

  Cannot change the hosts file in Windows Vista Home Premium. Read-only value.

  Help, please.

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to take possession of the host file and check to see if the same problem happens.

  To apply permissions to a file or a folder:

  a. right click on the file or folder and then click Properties.

  b. click the Security tab and then click Edit.

  c. do one of the following:

  ·         To set permissions for a user who is not listed under group or user names, click Add, type the name of the user or group, click OK, select permissions and then click OK.

  ·         To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions and then click OK.

  For more information, see the article mentioned below:

  What to know before applying permissions to a file or a folder:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Prevent changes to a file or folder (read-only):

  http://Windows.Microsoft.com/en-us/Windows-Vista/prevent-changes-to-a-file-or-folder-read-only

  Hope this information is useful.

• Cannot change the wallpaper and the theme of Windows 7 Home premium.

  Cannot change the desktop background.  I have a gateway Media Center GT5014.  They said there was a MS pilot specially for this problem but I don't know that it's the official name.  Or not my "update software drivers".  Ms certainly knows what it is... I've seen some answers in the forum for the starter editions, but nothing for the Home Premium edition.  I can't change themes, wallpapers.  Thank you.  kiki47z

  Could you please to:

  Panel configuration-easy access - ease of access Center

  Click on make the computer easier to see

  Scroll down to "remove background images (sicesdonneessontdisponibles) and confirm that it is not checked.

  MS

• You cannot change the time zone

  I lived in the Central time zone for more than 30 years, but my Windows 7 computer has turned to the Pacific time zone and does not allow me to change the Central time zone?

  OT: Windows 7

  Hi Robert,.

  Thanks for posting your question in the Microsoft Community.

  Of the question above, you are not able to change the time zone.

  What is the accurate and complete error you get when you try to change the time zone?

  Method 1: Setting the clock
  http://Windows.Microsoft.com/en-us/Windows7/set-the-clock

  See also, Synchronizing with a time server Internet, from the link mentioned above.

  Method 2: I suggest you try the steps from the following link:
  
  You cannot change the time and date if the time zone is set in Samoa (UTC + 13:00) and Ko 2657025 is installed in Windows 7 or in Windows Server 2008 R2
  http://support.Microsoft.com/kb/2660075

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Cannot change the incoming mail server. no text highlight

  I am unable to send mail from my Mac.  No problem with iphone or iPad. Cannot change incoming mail server as text is not highlighted.  Cannot change the server for outgoing (SMTP) mail. Cannot change the list of SMTP servers. Says offline.

  Hi Granny Smith 1.

  Thank you for using communities Support from Apple. Sorry to hear that you are having problems with mail. It's a little bit clear exactly what you see when you say that you cannot change any server info, but if you continue to have problems sending or receiving mail, you will find the troubleshooting steps in the following article useful:
  

  If you cannot send or receive e-mail on your Mac - Apple Support

  Kind regards.

• change my phone number and cannot change the keychain

  Dear,

  gently, I changed my phone number and cannot change the keychain

  You try to make the change in the preferences/iCloud/Keychain/Options of the system? What happens when you try?

  City link below.

  • The device that uses the SMS compatible phone number you provided when you set up first iCloud keychain. A verification code is sent by SMS to the phone number. If you can not access this number, Contact the Support of Apple, which can verify your identity so that you can run the installer on your new device.

  Frequently asked questions about iCloud Keychain - Apple Support

• Cannot change the Google search bar

  In Safari, I go to Google.com and do a google search. So far so good.

  Now, on the search results page, I try to edit the search in the Google search bar and nothing happens - the Google search bar is totally insensitive. To do another search, I use the address bar in Safari or reload google.com.

  I have deleted history, deleted all the data of the Web site, disconnected plugins and extensions, deleted the cache via the menu Developer. I used 3 CleanMyMac to clear and reset everything.  I can't solve the problem.

  Safari 9.0.2 (11601.3.9)

  OS X El Capitan 10.11.2

  Mac Mini (late 2014)

  A

  Please see below:

  Cannot change the Google search criteria in Safari

  B

  'CleanMyMac' is a scam and a frequent cause of instability and poor performance. Depending on which version you have, the developer's instructions may not completely uninstall. Please follow these instructions, then do as below.

  Please, back up all data before proceeding.

  Triple-click anywhere in the line below on this page to select this option:

  /Library/LaunchDaemons/com.macpaw.CleanMyMac2.Agent.plist

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  the contextual menu.*, a file can open with a selected item. If so, move the selected item to the trash. You may be prompted for administrator login password.

  Repeat with this line:

  /Library/PrivilegedHelperTools/com.macpaw.CleanMyMac2.Agent

  Restart the computer and empty the trash.

  You may also delete one or more of these elements in the same way:

  ~/Library/LaunchAgents/com.macpaw.CleanMyMac.helperTool.plist

  ~/Library/LaunchAgents/com.macpaw.CleanMyMac.volumeWatcher.plist

  ~/Library/LaunchAgents/com.macpaw.CleanMyMac3.Scheduler.plist

  Never install "CleanMyMac" or something like that.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.