I change windows 2000 to xp windoms and how

Similar Questions

• How to change Windows Sync dividing the folders and files in alphabetical order

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  • Windows Sync has divided the folders and subfolders in alphabetical ranking. I want my old transparent back and stopped synchronization partnerships. The only way that I can temporarily return the old display windows is to change the name of the folder. How can I stop Windows automatically it? Recent changes to your computer. I work towards a date limit and cannot stop windows from doing this and can not find an answer.
  • I have tried going to the Sync Center, but impossible to find a solution. Even tried Sync delete but Windows does not allow this.

  Try turning off the center of synchronization to run at startup as follows: http://www.vista4beginners.com/Disable-Sync-Center.  In my opinion, who will take care of the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite L750 - can I change for Win 7 64 bit and how?

  New Satellite L750 preloaded with windows 7.

  In the Setup process asked to choose the 64-bit or 32-bit operating system.
  Chose 32 bit and I am having second thoughts.

  I notice the difference? I can't change to 64 bit and how?

  Thank you

  > In the configuration of the process asked to choose the 64-bit or 32-bit operating system.

  Start the recovery process once more!
  Turn on the device, press F8 and choose fix my computer.
  Then the new window will open and there you can choose HARD drive recovery.
  Usually we have to ask once more what version you want to use.

• W4 compressed, hoping that someone could tell me if I need to change the boot order to USB and how?

  Recently, I did a recovery of my tablet of W4 drive using a USB key and need to know if I should change the boot order.  If so, I also need to know how if a kind person might help.  Appreciate any help, Muriel

  During boot press and hold the power and volume button when turned off and do not release until the BIOS menu appears. Boot order will be one of the selections.

• How the windows update components Lair? and how to configure update components?

  I can't update or install any application from my store of windows8.

  Then I try to fix this after I made the resolution of the problems that they

  will display the result is windows update components must be repaired or

  one or more components are configured incorrectly. What is the solution for

  This problem. How to fix windows component update?. How to he set up?

  Hello

  Thank you for helping me solve my problems on wins 8 apps store. After your replay I check my entire system, installed applications and settings, and then I see a problem with my Norton internet security. And I solved this problem. Now, I have no problem with my app store.

• Why the pop-up windows by adding modules mean and how to get rid of

  This forum must be able to accept an image with the request.

  This is so I'll do a work around images because the forum is defective

  

  In all honesty, I don't understand what you're asking. I'm not a * h0le at this time. Ask yourself why the ' you have chosen to open: (filename)... ". "dialog box appears?

  Your message has absolutely no information outside of the image (and the title which is not proper English). I gave the information that has worked for me, because it's my understanding I think that you wonder why that dialogue pop rather than do all that automatically (like Firefox). But ThunderBird does the same thing for me. If I showed you how to install the plugin. This is what worked for me, if it worked for you or not is different.

  But you're obviously offended me to treat you in the same way that you treated me... So cut the crap, grow some balls (you look well on the age, you should have gotten some) and have little respect for people.

• In FF password manager (30.0), when you open change, what are all the fields and how you fill them?

  When you open Edit, there are two choices: Web form and annotated.
  What is the difference?

  Then, there are fields for the host, submit the prefix, username, password, etc.
  How to fill out these fields?

  When you click for the Manager "assumes that of the current Page", all fields not necessarily fill up, so it's just for the username and password?
  I use constantly editing function, so it's a little strange to not see that further instructions here.

  When I click on tools, the saved password dialog box is on the list, so it's in my toolbar all the time.
  I use it constantly.

  What is the last password security? I know there are competitors of ideas. What is Mozilla?

  Thank you.

  Personally, I do not record the connections site in Firefox. The FireFTP extension records the FTP connections, so I use a master password to protect the people.

  I know I should finally pass a manager based password on a cloud, because if often, I forgot my login and have to reset, but... I have not bypassed by comparing the features and tests.

• I have an old machine with Windows 2000 with SP 3. How can I get updated so I can get the data on the latest machines?

  There also IE5 which I can't seem to update or another. Ideas?

  Updated to what? You can copy the data to an external drive and then copy it on your new machine. You will need to reinstall all the programs of original media.

• What is the updatususer account in my accounts for my Windows 7 Home Premium? and how to remove it?

  Noticed that there is a 3rd account next to the mine, the administrator and my accounts of girls, UpdatusUser, that it is and what its use for is what interests me, and if I can delete it, I would like to know how.

  Best:
  Panel of-> uninstaller-> uninstall an Nvidia update
  : P

• Update my Tecra 8000 from NT 4.0 to Windows 2000

  When I update me my Tecra 8000 NT 4.0 to Windows 2000, my Setup stopped and I got the message that I had to remove the Configuration Interface for system Toshiba driver. What is going on?

  To enable NetMeeting in Windows XP, you must go to the start menu and select run. Conf and click OK. After the NetMeeting configuration wizard starts, click Next. Enter your personal data and click Next. Select Directory list options, and then click Next. Select the media for your connection and click Next. Set up shortcuts for your convenience options, and then click Next. Click next to configure the volume options and click Next and then click Finish. To start NetMeeting, NetMeeting Startup session (e.g., run conf.exe again to start the application or select the shortcut in the start menu or desktop), click the phone button and enter the IP address of the machine you want to connect with.

• Satellite 1605cds: RAM has not reported in Windows 2000

  Hello

  I have a 2nd hand Toshiba Satellite 1605cds/4.3 (amd k6-2 450 mhz basic system).
  It has 32 MB of ram on board and a dimm slot - so put in a memory of 128 MB.

  But I read this Web page:

  http://fandelem.com/toshiba2.html

  where it says it can be improved with a 256 MB memory module!

  I have it plugged in and it correctly sees 288 MB (32 MB onboard 256 MB on housing) in the bios.
  When I boot from the partition of Windows 98 Second edition, it shows the 288 amount of ram.

  .. .but when I boot on the partition of Windows 2000 Professional, it displays a blue screen saying that the bios is not an improved ACPI bios. It says that I have to push the F7 key during the installation of Windows 2000 to disable ACPI and install HAL.

  But if I remove the 256 MB slot, Windows 2000 starts correctly without any problem.

  I tried to reinstall Windows 2000 by pushing the F7 key during installation, but then Windows 2000 shows that the 32 MB of ram.

  So, what can I do to run Windows 2000 and 256 MB module?
  The bios is the last that can be downloaded on the web page of toshiba.

  Thanks to all and sorry for my English.

  Hello

  According to your description W2k said to update the layer HAL (Hardware Abstraction Layer). In Windows 2000, there are several ways to solve the problems associated with the material (HAL, Hardware Abstraction Layer) Abstraction layer that may occur due to bad detection, an obsolete or non compliant Advanced Configuration and Power Interface (ACPI) Basic Input/Output System (BIOS) or incorrectly installed computer type or manually.

  For more information, please see this Microsoft support site:
  http://support.Microsoft.com/kb/237556

  But as I know Toshiba supports the 128 MB only on this unit and if you want to use more ram you can do at your own risk!

• A problem on Windows 2000 Pro SP4

  When I go to certain sites like facebook for example a bsod appears and restart windows and I don't know why? Help, please
  The following data in the bsod dump files:

  ==================================================
  Dump file: Mini010414 - 01.dmp
  Crash time: 04/01/2014-20:53:34
  Bug Check String: BAD_POOL_CALLER
  Bug check code: 0x000000c2
  Parameter 1: 0 x 00000007
  Parameter 2: 0x00000b8a
  Parameter 3: 0xe2ca9100
  Parameter 4: 0xe2ca9108
  Caused by the driver: win32k.sys
  Caused by the address: win32k.sys + 4 b 16
  Description of the file: multi-user Win32 Driver
  Product name: Microsoft (r) Windows (R) 2000 operating system
  Company: Microsoft Corporation
  File version: 5.00.2195.6708
  Processor: 32-bit
  Plant address: ntoskrnl.exe + 6b4e2
  Stack address 1: ntoskrnl.exe + 6b2e2
  Stack address 2: win32k.sys + 110146
  Battery 3 address: win32k.sys + 11d8bd
  Computer name:
  Full path: C:\WINNT\Minidump\Mini010414-01.dmp
  Number of processors: 1
  Main version: 15
  Minor Version: 2195
  Size of the dump file: 65 536
  Dump of file time: 04/01/2014 20:54:19
  ==================================================

  This is another:

  ==================================================
  Dump file: Mini010414 - 02.dmp
  Crash time: 04/01/2014 20:58:49
  Bug Check String: BAD_POOL_CALLER
  Bug check code: 0x000000c2
  Parameter 1: 0 x 00000007
  Parameter 2: 0x00000b8a
  Parameter 3: 0xe12b3460
  Parameter 4: 0xe12b3468
  Caused by the driver: win32k.sys
  Caused by the address: win32k.sys + 4 b 16
  Description of the file: multi-user Win32 Driver
  Product name: Microsoft (r) Windows (R) 2000 operating system
  Company: Microsoft Corporation
  File version: 5.00.2195.6708
  Processor: 32-bit
  Plant address: ntoskrnl.exe + 6b4e2
  Stack address 1: ntoskrnl.exe + 6b2e2
  Stack address 2: win32k.sys + 110146
  Battery 3 address: win32k.sys + 11d8bd
  Computer name:
  Full path: C:\WINNT\Minidump\Mini010414-02.dmp
  Number of processors: 1
  Main version: 15
  Minor Version: 2195
  Size of the dump file: 65 536
  Dump of file time: 04/01/2014 20:59:36
  ==================================================

  and thanks in advance for the help.

  I installed windows 2000 SP4 update rollup1 and that fixed it.

• Windows XP for Windows 2000 product key

  To the right:

  There is no more Windows 2000 on the market and a few Windows XP always available, we can get.

  Therefore, how can we use product key from Windows XP to Windows 2000.

  Also how can we use product key Windows XP to OS NT4.

  P.S. We still using OS Windows 2000 and NT4 / has copy of operating system image, but no more than these two CD can get from the market.

  Best regards

  Tony

  Your old keys are still valid (or should be) for use on the same hardware.

• How can I access the Internet in Windows 2000 server w/AD?

  I installed the unit in the Windows 2000 server as AD and DNS server is the local IP address in the ownership of the network.

  How can I set DNS server to connect to the Internet?

  Thank you

  Under the server name in DNS, you will see the SEARCH BOX towards the FRONT. There will be a POINT "." it. Delete the point, close dns, dns or reopen and forwarders will be available.

• If you are using windows 7 in xp mode my display settings are low and I can't adjust the parameters of why and how can I fix

  why I can't change my screen with windows 7 in xp mode and how could solve the problem

  Hi tmjmech,

  Thank you for visiting Microsoft Answers.

  Settings and change integration features

  When you run XP Mode, it is possible to change the material and data that are automatically integrated into the virtual pc. To change these settings when in Office XP Mode, click the Tools menu and select settings. You will now be in the settings of the virtual machine screen and click on the category of integration features . From there, you can specify what material and features that you want to embed or share with your desktop computer XP Mode.

  These features are:

  ·         Audio - this must be disabled so that you have the best performance. It should be noted that even with this unchecked, all its XP desktop mode will still play through the sound card of your host.

  ·         Clipboard - if this is enabled, then you will be able to copy and paste between XP Mode and your normal desktop.

  ·         Printer - Sharing host your printer with XP Mode.

  ·         Smart cards - XP Mode allows access to the host chip cards.

  ·         Disk - XP mode to access the host players, which include hard disks, CD/DVD players and removable media.

  All changes made to the above settings will be persistent every time that you start the XP Mode. However, if you disable the integration of a particular session, you can click on the Tools menu and then select disable integration features. This will make it so that you do not have access to one of the resources of the host. To enable access to these resources, simply click on the option to enable integration features in the Tools menu.

  Change the XP Mode Virtual Machine settings

  If you find that XP Mode does not work as fast as you want to, or you want to add more features, you must change some settings in your settings in Virtual PC for XP Mode. To change these settings, you must first stop XP Mode so that it is not in a State of hibernation. To do this, click on the menu on Ctrl + Alt + Delete , and then click close on the screen that appears.

  When XP Mode stopped, click the Start Menu, select all programs, Windows Virtual PC, scroll down and then click on Windows Virtual PC icon. You should now see a list of your Virtual PC, including Windows XP Mode. Right click on Windows XP Mode, and select settings. Now that Windows XP Mode is stopped, you can change the settings of your virtual machine. The parameters that you may consider to change to increase the performance and reliability are:
  
  1 memory -if you find that your applications are running slowly, then you can raise it so that your applications have access to more memory system.
  
  2 hard drives -you are able to add more 2 hard disks to your Windows XP Mode. So if you need to add another disk to your Windows XP Mode, you can do here. This will allow you to create a second disk on another physical drive of your computer to improve performance.
  
  3. cancel the disks - disks of cancellations allow you to create a base of your installation of Windows XP Mode image and then save all changes in a disc of cancellations. So if you need start from your base image, you just go back to settings and ignore the changes in your drive of cancellations. The next time that you start Windows XP Mode, you will be back to the basic configuration with any changes you have made to scrap. I suggest that everyoneturn this option on because it only increases the safety of your installation of Windows XP Mode.

  When you have completed your changes, just click the OK button to save the changes.

  When you then start Windows XP Mode, these settings will now be implemented.

  Visit this link for more information about how to use Windows XP mode:

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/using-Windows-XP-mode

  Additional information:

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/using-Windows-XP-mode

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.