Satellite 1605cds: RAM has not reported in Windows 2000

Similar Questions

• 1670 CDS satellite - modem does not work on Windows 2000

  Hi-

  I removed the Toshiba W98SE and installed Win 2000 (new installation). I managed to put it on the audio driver using downloads on your website (and it works).

  I do a test on the dial installation upward and that you have installed the modem also since your website (Conexant Soft K56 Data, Fax PCI Modem). This is intended for W98SE but microsoft message is

  The port looks ok. Please advise - is it the right driver?

  Thank you.

  A Windows 98 driver does not work on Windows 2000. Therefore, you need a new driver for Windows 2000.

  I have checked the Toshiba site but your model no available Windows 2000 driver exists.
  I think you have to search the site of the factory of the modem. Maybe you can find a driver or another portable model that has the same modem.

  Good luck!

• System Restore does not: Windows XP, getting the error "system restore has not initialized because windows stops."

  "System restore has not initialized because windows stops."

  This message keeps me from using system restore any previous date, I chose. Restore fails every time.

  Window shutsdown too early. What can I do to prevent this?

  Try to boot mode safe (the F8 key as the computer starts from the tap) and run system restore from in Safe Mode.

  HTH,
  JW

• printer hp photosmart 7345 has not run with Windows 7 Professional 64 bit

  Our range of printers hp photosmart 7345 has work perfectly with Windows XP Professional 32-bit, but he has not run with Windows 7 Professional 64 bit. Please could you tell us who should be used?

  Hello

  HP Photosmart 7345 is compatible with Windows 7.

  Download the drivers for your printer from the below mentioned link and check if it helps.

  http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=213999&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=213997

  
  Contact HP support for further assistance.
  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

• Brother printer has not detected by Windows 7 64 bit.

  Brother DCP145C has not detected by Windows 7 64 bit. What port is recommended for the local printer - LPT1? Windows 7 should detect when the USB connection, but there is no activity. Similarly, the mode to scan on the printer is not responding to "check connection". Thank you.
  Checked the port LPT1 and COM on Device Manager and seem to work correctly. No updated driver needed updated port.

  Hello Richard,.

  If several USB devices are plug-and-play, printers need a print driver to work even on a USB port. I went to the Brother website and a research on the model of printer "DCP145C" increase any responses - are you sure the model number of the printer (not the part number)?

  You have a printer disk supplied with your printer? If you do, try to use that to install the print driver. As far as LPT1 goes, is for a printer with a parallel port (printer), and the COM ports are for those who use the ports series.

  Thus starts with the right model number and look for brother.com right print driver (or use the disc that came with the printer). Try and see if that solves the problem for you.

  Let me know how you fare.

  Kind regards

  BearPup

• Satellite L10 - Hotkey.exe error after booting Windows 2000

  I've installed Windows 2000 on my Satellite L10 rather
  XP. After installing the utility Hotkey-I get an Error Message at every boot:

  Hotkey.exe - Entry Point not found
  The procedure entry point WTSUnRegisterSessionNotification could not be loaded into the WTSAPI32.dll dynamic link library.

  Same error Message When you try to manually start the Hotkey.exe.

  How can I solve this problem? The system works, but the
  Keys not.
  Thank you in advance for help!

  P.S.: As I read on the web, this error has nothing to do with the missing operating system XP - maybe the HotKey software does not work with Windows 2000. Where can I get a Hotkey software work for Windows 2000 for Satellite L10?
  I try to find it on the download from Toshiba site, but there is that some drivers for the L10 on Toshiba.com and the European server are only readers for XP :(

  Hi turmeric

  All the drivers, tools, and utilities are designed separately for each operating system. This means that you can not use tools designed for Windows XP Home edition with other operating system. You don't find utilities and tools because your device is not supported for the Windows 2000 operating system.
  I'm sorry.

• Satellite A665-14R - drivers not available for Windows 10

  Hello
  I tried to search Toshiba A665-14R drivers but drivers are not available for Windows 10, if I'm looking for the section Drivers on the toshiba Web site and select my computer model A665-14R then no driver rises, I think toshiba assuming that A665-14R cannot install Windows 10 rather I have 8 GB of RAM & CPU Intel i7 with a 3D graphics card! Its not like my laptop is old and cannot load windows 10, Microsoft has already tested and approved my laptop to window windows installed 10, since I have installed 10 my laptop works fine but I am not able to install TOSHIBA PC Health Monitor, Synaptics Pointing Device Driver, installation of equipment TOSHIBA TOSHIBA value added package Etc Etc

  Its really annoying that I can't scroll down pages because the Synaptics pointing device has no update
  Any help please?
  Thank you

  This model is quite old and has been supported for Win7. I can just say... no luck. A lot of older machines may well work with newer operating systems, but they are not officially supported.

  What should do? Try to check if the drivers, tools and utilities for a newer machine with similar hardware can be used on your laptop Satellite A.

  I had the similar problem in the past with Vista and no supported Win7.

• Satellite C855-1GN does not start the Windows system

  My Satellite C855-1GN will not load Windows.

  After pressing start it say starting windows the four colors appear in the center of the screen and seem to vibrate slowly but will not following charge.

  I ve restarted and run the fix for the system, but it cannot solve the problem, run the system restore but luck is.

  Can anyone help?
  I put t really want to reload the discs so it s not necessary that the girl has loads of work United to this topic.

  She may lose.

  see you soon
  Phil

  Hello

  You are able to access the advanced boot menu by pressing F8 while turning on the unit?

  If you are able to do so, you should try to start the computer using one of the advanced options available in the start menu.

  You can try to start the laptop computer using the last known good configuration or you can try to repair the system by automatically selecting the repair my computer option, you can try to start the machine in safe mode to access important data on the HARD drive.

  Finally (after data backup) I would recommend to recover the laptop using the Toshiba recovery media

• Satellite P300-18 is not always launch windows

  McAfee Anti-virus on my P300 18 bypassed Downloader Trojan horse.
  Eventually got rid of it after the purchase of Malwarebytes Pro.

  Since that time my machine; while starting, is not always launch windows on the first attempt and must be stopped or started several times or remove the battery to get windows to activate.

  The dealer where I bought the machine did a clean reinstall.
  I did a memory diagnostic test and no reported problems.

  Also did a chkdisc who has not demonstrated that the reports.
  Also does disk cleanup.

  Is there a simple solution?

  Hello

  If the operating system has been installed once more and if this didn't solve the problem starting operating system, then I recommend you to check the HARD drive.

  Here is a nice tool called Drive Fitness Test that allows you to run some diagnostic procedures to find some problems with the HARD drive.
  Google for it

  Otherwise, I recommend that you install the operating system using the Toshiba recovery disc.
  Did you create this disc in the past? Isn't it?
  Well, here you can buy this CD:
  http://backupmedia.Toshiba.EU/landing.aspx

• Re: Satellite L500 - Wifi does not work after Windows Update

  The wireless on my Satellite L500 worked perfectly before you update windows. However, after the updat when you try to connect to a wireless connection, it says that "no connection is available.

  I then clicked on fix to try to find a solution. Then the message "the diagnostic policy service does not work. Using Ctrl + Alt + Delete I went on services and attempted to start the DPS manually, but the message "Diagnstic political service on Local computer started and stopped. Some services stop automatically if they are not in use by other services or programs. »

  This message puzzled me enough as it is said that the Wifi is infact on however in a attempt to FN + F8 F8 option does not appear. Any help would be greatly appreciated.

  Hello

  For Satellite L500, there are already some threads here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=186764
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=178629
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=188577

  Additionally, make sure that the DHCP and DNS services are running. Type of startup is set on "Automatic" and try to restart both services.

• Properly installed service pack 1 status has not updated the Windows edition information.

  Original title: windows vista 32-bit sp1

  just installed the new hard drive on laptop. re-installed windows vista Home premium 32-bit. Traverse and filling all windows updates. service pack 1 is now next in line. 1.9 MB file downloads and "installed". do not reboot several times or take an hour or longer. complete in a few minutes. Windows update said installation was successful, but when I go into the system settings to make sure that the windows edition has changed, it is not sp1 as it should. I just have to wait a little while and try again, or is there some other im in question has not detected? something would be useful. system works great otherwise :-) Thank you.

  Hello

   
  Using Windows Vista 32 or 64-bit?
   
  How to determine whether a computer is running a 32-bit version or the 64 bit version of the Windows operating system.
  http://support.Microsoft.com/kb/827218#Method1
   
  I would say you can download service pack 1 manually, install on your computer and check the status of the issue.
   
  If you are using Windows Vista 32-bit, you can download service pack 1 from the following link.
  Windows Vista Service Pack 1 five language standalone (KB936330).
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30
   
  If you are using Windows Vista 64-bit, you can download service pack 1 from the following link.
  Windows Vista Service Pack 1 five language standalone for x 64 (Kb936330).
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=21299

• Windows Easy Transfer has not transferred any Windows Mail in Vista for Win7

  WET worked great for the migration of a Vista system to a Win7 system, except that my old stuff Windows Mail has not been transferred.  Is there an option simple copy/paste to move my email folders and content to Live Mail 2011?

  Hello

   
  See the link and check if it helps.
   
  Looking for Windows Mail?
  http://Windows.Microsoft.com/en-us/Windows7/looking-for-Windows-Mail
   
  E-mail
  http://Windows.Microsoft.com/en-us/Windows7/products/features/email

• printer virtual (ThinPrint) do not install on Windows 2000 comments

  Does anyone have virtual print (ThinPrint) running for a guest W2K?

  I refer to the version of ThinPrint that comes with the drive.

  I can't seem to get installed it.

  I use VMWare Player 12.1.0 - 3272444 and VMWare tools 10.0.5.520 and attempted a "Typical" VMWare Tools installation on a W2K guest under a host of Intel 64 - bit Windows 10.  I used the admin on both sides.  The guest of W2K has disabled UAC and is always admin.

  During installation, I received the following error dialog:

  RUNDLL

  Error loading tpvmmon.dll

  the specified procedure is found not

  The printer user interface

  Printer rundll command failed.

  Command: /ia /f "C:\Program Files\Common Files\VMWare\Drivers

  \Virtual Printer\TPOG3\OEMPRINT. INF' / r ' THIRD: "/m «TP release»»»

  Gateway"/h"Intel"/v"Windows 2000 ".

  Was asked to OK the absence of signatures on the stuff of ThinPrint.    After that the VMWare Tools installed I have restarted the prompt.

  The following log files resulted in the prompt:

  c:\Documents and Settings\All Users\Application Data\VMWare\Logs

  vminst.log_20160329_080638.log

  vmmsi.log_20160329_080638.log

  c:\WINNT\Temp\vmware-vmsvc.log

  c:\WINNT\Temp\vmware-vmusr.log

  Things that I found disturbing in the vminst.log_2016...

  2016-03-29 07:50:43 | tools-build-3228253 | Attempt to launch "rundll32 tpvmmon.dll, InstHelper install - q."

  2016-03-29 07:50:51 | tools-build-3228253 | Child came out with code 0

  The above command is probably what caused the first error dialog box during installation, but it's not really report this error to the

  install the program.  If I try the command to the admin command prompt I get the same error 'procedure cannot be found.

  I used a dumper of export in the dll and the entry point is actually spelled InstHelperW.   I tried with the extra W on the command

  online, but I got the same thing.

  2016-03-29 07:57:31 | tools-build-3228253 | Attempt to launch "install"C:\Program VMware Tools\TPAutoConnSvc.exe"- q-".

  2016-03-29 07:57:31 | tools-build-3228253 | Create process failed: error 193

  2016-03-29 07:57:31 | tools-build-3228253 | Attempt to launch "install"C:\Program VMware Tools\TPVCGateway.exe"- q-".

  2016-03-29 07:57:31 | tools-build-3228253 | Create process failed: error 193

  Try the above commands, a command admin line causes "not a Win32 application valid."

  Things that I found disturbing in the vmware - vmsvc.log...

  [Mar 29 07:58:02.953] [Warning] [vmtoolsd] Plugin 'guestInfo.dll' has no opening: 'C:\Program VMware Tools\plugins\vmsvc\guestInfo.dll': the specified procedure could not be found...

  ...

  [Mar 29 08:06:39.757] [critical] [Glib] file...... \.. \glib\gmain.c: line 2849: assertion ' loop! = NULL' failed

  I tried to install the printer via the Add-a-Assistant printer.   ThinPrint is present in the list of printers.   I give COM1:, etc., but in the end is just says "failed".

  I if "install" from the context menu of the OEMPRINT. The system INF flashes just to me.  No dialog box.  No errors.  No printer.

  The only thing left to try is to create a new VM W2K and see if the problem persists.   I'll post back with the results.

  Dear diary, I ended up coming back to VMWare Player 7... and printing, I'm happy to report. I'm not sure whether the installed printer drivers are product of ThinPrint.  That they are not listed as such.  But the VMWare tools install break thru without a hitch and I my print feature back.

  Remind you it's easier said than done.  Here's the problem: VMWare Player 7 is still available for download from VMWare, but after install you it and it phones home page for VMWare tools, it always indicates that the update server is not responding.  According to the Wiki for VMWare Player, version 7 is no longer supported.

  So how do you get the tools?

  I tried to download the tools. TAR that VMWare offers, I believe than version9 dot something.  I had to find a way to decompress.  (That Windows uses. TRE?)  Then I had to make one. ISO to it so that I could mount it and present it to the player.   But it did not work.  He ran quickly and completely in silence and produces newspapers, but I couldn't figure out why she did nothing.    I have to admit that I do not exactly trying to decipher the newspapers set up.

  So on to plan B, ugh: I downloaded the demo of VMWare Workstation 7 Pro, installed, saved the windows.iso that accompanies it, uninstalled, reinstalled VMWare Player 7, put the windows.iso in the root of VMWare Player installation on the host computer, modified my version 7 W2K VM settings so that my virtrual DVD player had the ISO mounted, booted up the virtual machine then I started the installation (setup.exe) tools of the virtual DVD.   (You mind, making a Manage / reinstall VMWare Tools will just try to shout to the update servers and fail.)

  So I'll never be able to update the VMWare Tools, but it's OK because everything seems to be working.  I will make just a point to save this windows.iso so I don't ever have to be in this position again.

  Just for the record, my exact versions are: VMWare Player 7.1.3 build 3206955 and VMWare Tools 8.4.9.30422.  The version of the tools is the one shipped with VMWare Workstation Pro 7.1.6 build 744570.

  So I guess it's just a case of VMWare takes a step backward on W2K.  Maybe they will fix it in the future.   Of course I'm probably one of only a handful of people still need run W2K, so I won't hold my breath.

  Thanks, Continuum, to try to help.

• Satellite 1620CDS - need Multimedia Audio Driver for Windows 2000 Pro

  I recently had to reinstall my laptop Satellite 1620CDS with Windows 2000 Pro, but I can't locate the multimedia Audio device driver! and as such I have no sound.

  Any advice on how I could find this driver, would be much appreciated...

  Just FYI: your laptop has Crystal 4281 audio card. I hope you find the driver on the page given by the previous user. It is in the list.

• Satellite Pro 4200 drivers and utilities for Windows 2000

  Hello

  Recently, I decided to upgrade the OS on my satellite pro 4200 to Windows 2000, it was previously under Windows 98.

  After the installation of Win 2000, many components are missing or not working not properly (display, missing utilities, etc.). I couldn't find the Win 2000 drivers in your download section.

  Could you please help me?... is there any service pack with all the win 2000 drivers and utilities of this model? Where can I download from?

  Thank you very much

  Hello

  Littco said, all the drivers are on the Web site.
  In addition, check if you can install a driver that was designed for ie Win NT or Win Xp. sometimes, these drivers work on W2k operating system.

  Good bye