I changed my ram and something is wrong

Similar Questions

• Can I change CPU, RAM AND graphics in HP Commpac D220?

  Hello! Thanks to the time to read this topic, I have a question on my hp compac D220 pc so I hope you will tell me the answer!
  IM runing windows 7 now and try to install windows 8.1 but IE NX unsupported. So I decided to change my processor and the extra ram of 1 GB ad, and the new graphics card but I don't know that the graphics card & CPU (last) support my pc.
  Here is my pc in detail.
  1.80 ghz, 180 GB HARD drive and 1 GB of ram, motherboard AMIBOIS, Windows 7 running. So suggest
  me that I buy a new pc or
  change cpu, ram and graphics card.

  Hello

  As it is an OEM machine, you will not be able to replace the CPU this processor is specifically compatible with OEM motherboard. If you are looking to change the CPU, RAM and GPU, you really can both do you a favor and buy a new machine all together, or build your own.

  Kind regards

  Patrick

• I changed master PW and something went very wrong; keeps asking me for FIPS 140 page does not load. Help

  Today, I changed master PW. I'm sure that I entered old master PW properly and new (twice) correctly entered also.

  Apparently, he did not. Something very wrong. I can not load the page, get the message:
  Required PW: Please enter the m for encryption FIPS 140 pw, key and.

  I write everything down, I tried to go home, but nothing.

  I also remember old master PW.

  IN ADDITION, I CANNOT CLOSE FIREFOX, CONTINUE TO SEE MAC OSX "PINWHEEL"...

  HELP ME PLEASE.

  Hi Cor - El
  I want to thank you for taking the time to write this easy to follow the answer. I went directly to the folder via the specified path, tire/secure the 2 files deleted and found I could enter a new master pw without any problem.
  I also read that this (and the previous) FF master pw modification is not allowed...
  Well, damn. Guess that's why it is important to read the instructions FIRST.
  Thanks again.
  GirlWithDragonTattoo

• When I start my laptop running windows 7, I sometimes get a duller tone of flashing two beeps as if something is wrong. What coud this be and how do I kill him?

  When I start my laptop running widows 7 I sometimes get a most annoying intermittent tone of two beeps suggesting (I imagine) that something is wrong. I think this has been already experienced with the connection of the optical mouse (Verbatim). Later, everything was fine, but the sound is back and the phone seems to work OK. What could cause this warning sign and how do I get rid the same?

  Hey Neville,

  1. What is the brand and model of your computer?
  2. did you of recent changes to the computer?

  Let's try these suggestions and see if the problem still occurs.

  If you are using AMI BIOS, see the error messages associated with it.

  Number of Beeps      Error Message
  ---------------------        ---------------
         1             DRAM refresh failure
         2             Parity circuit failure
         3             Base 64K RAM failure
         4             System timer failure
         5             Processor failure
  

  These errors are codes reported by THE system BIOS. Because errors are hardware related, you must call your equipment manufacturer or dealer to help fix the problem.

  The product included here, AMI BIOS, is manufactured by vendors independent of Microsoft; We make no warranty, implied or otherwise, regarding the performance or reliability of this product.

  Hope the above information has been useful. If you have any doubts, answer here and we are happy to help you.

• Microsoft Fix It online, something was wrong and we cannot connect you right now. Please try again later.

  Dell Vostro 400 desktop, Windows XP sp3 running hard. it can not enter difficulty online without the following, "Microsoft Fix it online, something was wrong and we cannot connect right now. "Please try again later". Also, previously, when I could get online, my computers does not list the computer I use actually and I can't add the computer or change options.

  Hello

  1. Are you connected to any network?
  2. Have you been able to connect earlier?

  We use Microsoft Live account to connect to Microsoft Fixit Center Online.

  I suggest you try posting the question at help below links:

  http://social.Microsoft.com/forums/is/fixitcenter/threads

  http://answers.Microsoft.com/en-us/windowslive

• WLPG error message: "sorry, something was wrong and we couldn't get your list of albums.

  When you try to download an album to Skydrive from Windows Live Photo Gallery, I can't connect to my account in WL, but then it stops there and delivers the following message: ' sorry, something was wrong and we couldn't get your album list', without which you have no albums list to select from.

  There is no other information was available, and this is the response that I get several times in recent days, which seems to suggest that this is not a temporary bug in the system.  I also receive this when you try to download another computer.

  Hello

  As the issue is specifically related to Windows Live photo Gallery, you can publish the link provided below for assistance.

  Gallery Portal

  http://windowslivehelp.com/product.aspx?ProductID=20

• We get an error 'something was wrong and we cannot connect you right now. "Please try again later ' signs in Family Safety website.

  * Original title: unable to connect to the family safety

  I tried to connect to website Windows parental control for 2 days.

  I tried two different computers in two places - don't share is not the same ISP, browser, etc.

  I get this message:

  "Something was wrong and we cannot connect you right now. Please try again later. »

  The service is down?

  I heard this on another post, and it WORKED for me also!  I logged on my account live.com and udated my name in my profile.  I don't know if that it or if MS has solved something but I can not connect on fss.live.com.  Please share and please post if it worked or not.

• Something going wrong on a server that contains information about your user account and the mailbox can not be found.

  Cannot open the e-mail.  I can connect on the MSN home page and when I right-click the outlook icon it shows the e-mail Inbox, but cannot access e-mail.  I just get this error

  "Something going wrong on a server that contains information about your user account and the mailbox is not found."

  This error is on the MS and they are aware and working on a fix.  Have you tried connecting mail.live.com directly using your e-mail address and the password?

  For later use, you would get more (and larger) response if you posted this in the Outlook.com (e-mail) section, where are the experts.

• Cannot use parental controls, error, something went wrong and we cannot connect you right now. Please try again later.

  When I try to use the connection parent in windows, I get the following error:

  Sorry, the service is not available now

  Please try again later.

  Error code: 803D 0013

  When I try to log on to the familysafety.live.com site, I get the following error:

  Something was wrong and we cannot connect you right now. Please try again later.

  This happens on both accounts of parent. Here are the addresses of e-mail for these accounts: * e-mail address is removed from the privacy * and * address email is removed from the privacy *.

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  I'm sorry to know that you are facing problems access Family Safety.  Let me try and help you with the issue that you are facing.

  Many users facing this issue fixed by updating the Microsoft Account profile.

  Please update the name and name in the Microsoft account profile, then check if it helps.

  See the article:
  Security information for the Microsoft account: FAQ

  http://Windows.Microsoft.com/en-us/Windows-Live/account-security-password-information

  See also the suggestion provided by "Jude D. McCoy' of this thread:

  https://answers.Microsoft.com/en-us/Windows/Forum/windows_other-security/cant-login-to-family-safety-website-redirect-loop/38477335-e8ae-4AA1-81c8-acb6343377f9

  I hope this helps. If the problem persists, we will be happy to help you.

• Hi I was doing a tutorial on spllcing images and am confused. He told me go to the windows tab and turn off the application framework. I can't find the application framework on the windows tab? I need to change a setting, or something

  Hi I did a tutorial on the splicing of images and I'm confused. He told me go to the windows tab and turn off the application framework. I can't find the application framework on the windows tab? I need to change a setting, or something

  Hi, Yona,.

  The application is available for Mac machine and not a windows machine.

  Concerning

  Rohit

• Hi, my creative cloud libraries will not work. I get a comment to "something went wrong during the initialization" and I can't save anything in a library. what I am doing wrong?

  Hello

  my creative cloud libraries will not work.

  I get a comment to "something went wrong during the initialization" and I can't save anything in a library.

  what I am doing wrong?

  

  Hi Rachel,

  Please, try the following steps:

  • Close all applications CC
  • Complete the process monitor activity/task manager (CCLibrary).
  • Restart any application and check.

  Hope that helps!

  Kind regards

  Sheena

• Trying to move from a menu of navigation link that is too long to two lines and can't change it. If something has changed in this regard?

  Trying to move from a menu of navigation link that is too long to two lines and can't change it. If something has changed in this regard? I'm used to be able to do this simple action.

  No, there is no change in this regard. Exactly how you try to change the links? In Design view or by BIE? Also are you referring to the default menu or a manual.

  Thank you

  Sanjit

• I'm trying to update the synchronization from the old to the new. When you connect, I get the message (in German) "error 500. Oops, something went wrong. Let's fix this. "

  With "login", I mean the page that appears when I click on "Options-> Configure sync" (or however it's called in English).

  I have one of my computers disconnected from the synchronization of the former. And this is the latest version of Firefox. What I didn't, it's step 2 "unplug ALL devices". It's impossible because I often changed the Linux Distro on many computers in the past years and I synced Firefox everywhere and in the (old) list of devices ago still showing that devices exist no more long time, but you cannot delete them.

  So, to be safe, I have not disconnected Firefox on my other computers (and always use the old sync), because then I'm afraid I'll lose ALL my data.

  I have a problem on one of my computers laptops, Ubuntu 14.04, V 38.0.

  Error 500 ouattara because something was wrong. We have been advised and to tackle the problem.

  What version of Firefox is that happening with?
  If she with Firefox 29 or later, go here to set up a new account.
  https://accounts.Firefox.com/signup
  Make sure that you use a different user name / Email address you use for your other account synchronization.

  Once the account is created, connect you to Sync via Firefox using I already have an account!

• I changed my password and before I finished I was locked out of my iPod Gen 5

  Today I realized that I had not changed my password for a while so I went to change. I had to enter my current password to change then I tried and got it wrong. The screen displays the numbers for let me try again, but he also said something like a failed attempt. I realized that I didn't know my access code numbers but rather the way in which numbers are connected to each other. I turned off the iPod and it went back in if I could enter my password and now my password I was using before does ' t work and I'm locked out. Please help me! I backed up last week, but I went on vacation and I wish that all my photos.

  mhoty2 wrote:

  I realized that I didn't know my access code numbers but rather the way in which numbers are connected to each other.

  If you don't remember the password, then you must restore the device to remove it. You can then restore the device to your last backup. If the device has been disabled as you say, then turning off and on again will not disable the old password, it will remain the same unless you changed it. Once the device is disabled, you will not be able to save. If you have synchronized the device to this computer in the past, linking can cause your power backup, depending on how many times you incorrectly tried to get into the device. If you have disabled it, you will lose your content.

• Sorry, something went wrong. Please try again.

  Hi.I had 32-bit and 64-bit, I changed and now I can't connect to Skype.
  I have a Microsoft account and I can not connect with Facebook.
  It says sorry, something went wrong. Please try again.
  Help, please

  PS: I don't have a .net framework. Is it because of that?

  

  Uh, I got what it was. He was of the .net framework. Thanks anyway