I created a WMV in preparation to upload to Youtube. However, at the end of its duration of 3 minutes 56 seconds, it freezes no apprent reason. Any ideas?

Similar Questions

• I want to allow my subscribers of the site the ability to upload their own content and save it in a repository that is clean. Maybe even integrate with Dropbox. Any ideas to do with BC?

  I want to allow my subscribers of the site the ability to upload their own content and save it in a repository that is clean. Maybe even integrate with Dropbox. Any ideas to do with BC?

  This type of installation may be feasible. After the client in a secure area log, they can download files under their own account using case (Web Forms with file attachment fields) or webapps. Everything really depends on the level of complexity you need.

  Hope this helps,

  Mihai

• I accidentally created a "Preset" for an A6 postcard, but with dimensions of the A5. To complicate the problem, I managed to save by mistake in the default presets and now it seems I can't get rid of it. Any ideas? Thank you.

  I created accidently a custom preset in Indesign to a postcard A6, but with dimensions of the A5. I badly taped so that it now appears under the predefined default settings and it seems, so I'm unable to delete by all means that I was able to identify. Anyone have a solution? Thank you.

  I think having solved by doing file-presets-by default, select preset and then delete. I'm still not entirely sure how, but somehow I got the desired result! Thanks for all the advice offered.

• Why create a box that I change the sizes on its own?

  I can create a box (say a CPR) corner radius stays the same, but when I do it then click on something else or out of the box and then again on it periodically, it will change sizes slightly.

  any ideas?

  ID of "Scale to see a preview of the limits" enabled in preferences > General?

  And please: show screen captures (also the panels) of before and after.

• WMV detect the end of the movie and trigger event (go to the frame)

  Hello, I use WMV in an application. I usually use. MOV files so I'm a bit lost as to how to do what I have to do. I want the video to play through, and at the end of the movie, move to a new framework. Before, with the .mov files... I would use this code:

  on exitFrame me

  If the sprite 22 moveTime < 1840 may

  go to the section

  on the other

  go next

  end if

  end

  Appears not to work more than I think that WMV doesn't mount as .mov

  Director detect the end of a WMV movie and trigger an advance of frame on the time line?

  Thank you

  I have been through this accomplished way, hacked my it... that's sometimes what you just have to do.

  In the case of others are looking, the solution that I came here with is as follows:

  on exitFrame me

  myVideoTime = sprite (#) .currentTime

  myDuration = .duration sprite (22)

  If myVideoTime< myduration="">

  go to the section

  on the other

  go next

  end if

  end

• I created my site with Muse and uploaded to an external ftp hosting, now my secure log in will not work because I use no BC. Is there a way to create a secure log which will arrange with forced to use BC?

  I created my site with Muse and uploaded to an external ftp hosting, now my secure log in will not work because I use no BC. Is there a way to create a secure log which will arrange with forced to use BC?

  Hello

  Secure area login feature will not work unless you host your website with BusinessCatalyst.

  Please take a look at this as an alternative

  Password protect Pages Widget for Adobe Muse

  Also, check this thread,

  Re: Can I create a login/password in the Muse for a HTML5 page or two?

• "Preparing Windows" on every boot and all the lost data

  Hello

  I was facing this problem since yesterday. The computer was running slow and suddenly, a blue screen with "" appeared. There was a status of error under completion data. I waited until he got to 100% and I was expecting then reboot as it was written. There can be no. If I pressed the power button to restart manually. The next time computer starts, he says "Prepare Windows" I couldn't do anything other than wait until he did prepare. Once logged into my account, I noticed that everything on my desktop disappeared. All my parameters passed. applications and personal files were not deleted, but they were not on the splash screen or the office. I had find them all and put them back where they should be. I turned off my computer, and today, I realized that, once started, Windows tried to prepare again. The same thing happened. It's dissappeared. I don't know what to do. Any ideas?

  I run Windows 8 Enterprise 64 bit on HP dv7, 1070ee.

  Thank you

  Thanks for your quick response
  
  I ran the tests on the main hard drive and memory, both managed 100%. Fortunately!
  
  I created another account administrator and then disconnected (e) of the original account that I was already connected. I realized that the infamous 'prepare Windows' does not appear during the loading of the new account. It's a good sign. So I removed the first account I had. Kept records of course! Made some changes to the appearance of the windows. Restarted. everything was in place.
  
  So, I guess that the problem was with the first account I was using. I don't know that is it right. Now, everything's fine.
  
  Thanks for the help
  K

• The short films that I do in Windows Movie Maker fail to run after about 1 minute, regardless of the format, I save in (WMV or AVI) any ideas why or what I am doing wrong?

  The short films that I do in Windows Movie Maker fail to run after about 1 minute, regardless of the format, I save in (WMV or AVI) any ideas why or what I am doing wrong?

  I'm just looking to add the opening titles to the pieces of film of aprox 3 Germans, but everytime I try and save files for uploading to Youtube, then fail shortly after a minute. The sound and picture freeze while the counter continues until the end of the file.

  am driven crazy by this so any advice would be welcome...

  Hello

  My friend John Papa - MVP - is the expert on Windows Movie Maker.

  PapaJohn.org
  http://Papajohn.org/

  PapaJohn - online tutorials
  http://www.Papajohn.org/mm2-online-tutorials.html

  Windows Movie Maker Tutorials - see the menu on the left and others on the main screen.
  http://www.windowsmoviemakers.NET/tutorials/

  Windows Live Movie Maker Forums are good sources of information:

  Windows Live Movie Maker that works on Vista and Windows 7, see the link under Windows Live Essentials.
  http://windowslivehelp.com/

  Windows Live - Movie Maker Portal - official support Site - see also the Forums of the right part of the page
  http://windowslivehelp.com/product.aspx?ProductID=5

  ====================

  These might help:

  Getting started with Windows Movie Maker

  Import video, photos and audio on Windows Movie Maker

  Import video from a videotape

  Get a movie in Windows Movie Maker

  Make a movie quickly in Windows Movie Maker (AutoMovie)

  Publish a movie in Windows Movie Maker

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Thunderbird 38.01, when I created a new e-mail account, it does not take account the preferences of archive and records everything in a single folder, although the old accounts work well.

  I installed Thunderbird on a system different and migrated with success profile, but earlier today that Gmail wasn't picking up messages correctly, so I ended up using the new feature of Thunderbird. (I'm also spent POP IMAP for Gmail). The newly created has no trouble picking up the messages from the server, but when I try to archive, he pours everything into one folder. My settings call for records of the year and the month. Each account other archive correctly. The newly created is not in a row.

  While poking around, I can have answered my own question. Thunderbird was not ignoring the parameters month and year for archiving completely. He was pouring newly archived messages from the Gmail account in a single folder. However, it was also archiving each of them in the old Gmail account archives folder and putting them in the correct subfolders it. It's strange, but it is achievable. I guess that Thunderbird has recognized the same email address used to set up the old account (which wasn't downloading mail more for some reason any) and the new. I changed the folder on the new configuration settings to point to the folder of old archives, and now Thunderbird archives only one copy of each message, as it should.

• Double click on the arrow to the left on the tab bar creates a new tab at the end of the right hand.

  With Firefox 29.0.1 by double clicking on the arrows on the right in the tab bar or the left creates a new tab at the end of the right hand of the tab bar. It is embarrassing behavior that violates standards around UI design click and double-click. A double-click should extend the behavior of the single click rather than do something completely different (opening a new tab). An example would be, in a Word, a single click selects a Word, double click selects the sentence and a triple click selects the paragraph. Note that this is a separate issue from double click the tab bar itself to create a new tab.

  When there are more tabs on the tabs in the window toolbar, that highlight the tabs on the side will not hold show tab in use. I can click on the left and right arrows at the end of the tab bar to scroll the bar in this sense to bring a tab I want to select in the display. I believe that the double click on the arrow to the left would scroll the bar completely to the right, exposing the tab on the left Double click on the right arrow would scroll the bar left entirely exposing the rightmost tab.

  It is a logical extension and expected behavior of single click. Single click - scroll once (seems to be the value of the tab in three), double-click on - scroll all the way.

  For now, if I want to access the tab on the left, I have to click the arrow slowly and carefully until I get to it. I used only one quick click on the arrow to the left until that shponkah stop scrolling without having to count how many clicks. It is possible that my simple quick clicks were actually double-click. However, the bar tabs would stop scrolling when it reaches the end.

  Now, the behavior is really annoying and unexpected. Double click on left dead entirely right tabs completely left arrow and creates a new tab at the end of the right hand. Ditto the arrow right in the opposite direction.

  While I can (maybe) see that the value of a double click on the tab bar itself to create a new tab, double click on one of the scroll arrows should show a new tab.

  Double click on the arrows of the tab should scroll the tab fully for this purpose bar. If the tab bar is already entirely Scrolls towards ending extra clicks (single, double and triple...) should be ignored.

  I like the idea of opening a new tab to the right of the one that has the focus. This should be an option of the contextual right click menu.

  That should not occur if you click the scroll buttons in the tab bar.
  A double-click should act as page up/down and move a full screen and a triple click should move to the left (first tab) or the right (last) until now tab.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I gifted my father music and a song of the AUS iTunes, but they upload because it is outside the Australia (in New Zealand). Is there a way to get around this? There is only an iPad.

  I gifted my father music and a song of the AUS iTunes, but they upload because it is outside the Australia (in New Zealand). Is there a way to get around this? There is only an iPad.

  "gifts can only be redeemed in the country store that they came from".

  You can try to contact iTunes Support through CHAT or by phone. -They can try to solve this problem.

  https://www.Apple.com/support/iTunes/

• HP Envy 14-1200 Prod # XQ103AV: "we could not create a new partition or locate an existing one. See the Setup log file.

  System - HP Envy14 - 1200 Beats Edition Notebook PC Series - product # XQ103AV.  It came pre-installed Windows 7.

  Error message "we could not create a new partition or locate an existing one.  See the Setup log file.

  appears in the new installation of Windows 8.0.

  Installation of MS Windows 8 DVD detects the hard drive OK.

  Software mini of Partition of the tool (3rd part) detects the hard drive OK.

  Windows 8 DVD software both MiniTool detects the disk partition and its OK formatted, but the error message is displayed to prevent installation.

  Here are the steps that I tried to solve the problem, but it won't work.

  1 opportunity Microsoft Windows 8 DVD diskpart to clean HD, to partition and to format... always get the same error message.

  2 opportunity Microsoft Windows 8 DVD diskpart to clean HD and partition... always get the same error message.

  3 MiniTool Partition software used to clean the HD, partition and format... always get the same error message.

  4 MiniTool Partition software used to clean HD and partition... always get the same error message.

  5 has bought a new hard drive repeat steps 1 to 4 and I got the... its error message.

  Background

  I have upgraded to Windows 8 Windows 7 and it worked for 2 months, then I upgraded to Windows 8.1.

  After that the system is being updated and restarted, the screen turn black.  So I decided to re - install Windows 8.0.

  There is no SIM card in the laptop.

  Help, please...

  I managed to do work Ok. Use Windows 8 DVD to run Diskpart

  1 delete the partition.

  2. restart the system.

  3. allow Windows 8 DVD to perform the partition and format the HD.

• Create a shortcut on the desktop the icon comes back to a 'globe' for any shortcut, I create. It does not cover the actual icon as shown in the url or web page. Any ideas?

  Create a shortcut on the desktop the icon comes back to a 'globe' for any shortcut, I create. It does not cover the actual icon as shown in the url or web page. Any ideas?

  Hi Ronnie,.

  I see that you can not create a shortcut on the desktop. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what operating system is installed on the computer?

  3. what security software is installed on the computer?

  4. have you made changes on the computer recently?

  5 is the issue limited to the creation of shortcuts on the desktop?

  6. How do you try to create a shortcut on the desktop?

  Please provide us with more information to continue troubleshooting as a result.

  See the link on how to ask questions or help on the Forums.

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

  Thank you.

• When I download a WMV file on a website and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.

  When I download a wmv on an internet site and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.  I was told that the media player can miss a card.

  Hello

  1. what operating system is installed on the computer?
  2. are you able to play videos other than video .wmv successfully?
  3. don't you make changes to the computer before the show?

  Method 1
  I suggest you to check if the hardware acceleration of the display device setting is too high.
  a. Click Start, click Run, type desk.cpl and then click OK.

  b. click on the settings tab and then click Advanced.

  c. click the Troubleshooting tab, and then move the hardware acceleration to none.

  d. click on apply and then click OK twice.

  e. If the problem is resolved after you move the slider hardware acceleration to none, contact the manufacturer of the graphics adapter driver to determine if there is an update that resolves this specific problem.

  Method 2
  The required codec is missing or damaged. If the problem occurs when you use a .wmv file, download or reinstall the latest version of Windows Media Player. If you use an earlier version of Windows Media Player, upgrade to the current version of Windows Media Player for your operating system.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player

  If the problem occurs when you use a different format of video file, for example a .mpeg file or an .avi file, download or reinstall the appropriate third-party codec.

  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Note: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

• I converted a WMV to SWF format and I can't hear the sound in Internet Explorer 8, he plays very well in other software.

  I converted a WMV to SWF format, but I do not see the video. I hear no audio in INTERNET EXPLORER 8. The audio works fine in other software.

  Hello

  (1) you are streaming the videos on Windows Media Player online or just play them online?

  (2) have you installed and updated plugins like Adobe?

  I suggest that you try the methods below to resolve this issue.

  Check whether the sound is enabled in Internet Explorer:

  a. open Internet Explorer.

  i. click on tools and then click Internet Options.

  (b) switch to the "Advanced" tab

  c. scroll down to the 'Multimédia' heading

  d. make sure that "Play sounds in web pages" is checked. Click on 'ok '. Restart Internet Explorer.

  Let us know if that helps.