I currently have an iMac 27 ", end of 2012 running OSX 10.8.5 Mountain Lion.  Can I upgrade directly to El Captain OSX 10.11.2 without going through any other upgrade using the free update available on my update page?  T

Similar Questions

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• How can I change a document linked from right to left bound without going through the software of the Middle East?

  I received a bilingual file from a client (Hebrew and English). I need to remove the Hebrew pages and let the English. My problem is that the pages are always configured to read from right to left (linked right) and every difficulty that seems to be supported only if I use the Middle Eastern version of InDesign, which I am not according to me. How can I change the direction of the link in my English version of InDesign CS6?

  I found a good Javascript post Word by substances that enables / disables the status of binding preference in both directions of law related to left-bound:

  App.documents [0].documentPreferences.pageBinding = app.documents [0].documentPreferences.pageBinding == PageBindingOptions.LEFT_TO_RIGHT? PageBindingOptions.RIGHT_TO_LEFT: PageBindingOptions.LEFT_TO_RIGHT;

• Y at - it a link to the free update or I must first upgrade to Windows 7 and upgrade them to Windows 10?

  Original title: Dee

  I have an old Dell Inspiron 15 with Vista Home Premium and want to switch to the window of 10. Y at - it a link to the free update or I must first upgrade to Windows 7 and upgrade them to Windows 10? Or could it be the Windows 10 Pro?

  The free offer of Windows 10 is not available for Vista.  You need to upgrade to Windows 7 SP1 or Windows 8.1.

• Try to upgrade OS 10.6.8 to El Capitan on iMac. But the FREE update tells me it can not install but will not say why even when I click on learn more. Suggestions? Help?

  Try to upgrade OS 10.6.8 to El Capitan on iMac. But the FREE update tells me it can not install but will not say why even when I click on learn more. Suggestions? Help? Appreciate the assistance.

  More details on the iMac you have and how much RAM is installed would certainly contribute to answering your question.

• Have a Mac mini end of 2012 OSX elcapitan cannot use airdrop with my iPad air2 and mini iPad and iPhone 5, while the iPad and iPhone work fine with airdrop.  Can anyone help?

  Hello

  I have a mac mini end of 2012, air2 Ipad, mini iPad and iPhone 5.  I have a problem: while I can use airdrop between iPad and iPhone, I can't use airdrop

  between mini mac and other devices that I own and vice versa.  Can someone help me?

  Thanks Vincenzo

  Mini PS mac is updated with OSX El Capitan

  The Mac sees the iOS devices in AirDrop?

  IOS devices see the mac in AirDrop?

  It worked before?

  Have you put off, then back on your router?

• MY DELL LATITUDE D610 HOW CAN I UPGRADE TO THE NEW VERSION OF WINDOWS? NOW IT IS WINDOWS 7, WHAT VERSION IS SUPPORT FOR USE WELL ON MY DEVICE?

  MY DELL LATITUDE D610 HOW CAN I UPGRADE TO THE NEW VERSION OF WINDOWS? NOW IT IS WINDOWS 7, WHAT VERSION IS SUPPORT FOR USE WELL ON MY DEVICE? PLEASE HELP ME

  Read this: upgrade Windows 10 Dell Latitude D610

  Take a look at my answer, complete instructions.

  Basically speaking, Dell officially supports Windows 2000 and Windows XP on Dell Latitude D610 (and other models of Dx10).

  However it can really run Windows Vista and 7 at least, as long as you max out the RAM (2 GB, 2 x 1 GB, can be purchased at a great price in eBay) and install the drivers, in particular graphics drivers, look in Device Manager and see what drivers are needed manually.

  If you're lucky to have a D610 with ATi graphics card then you can even run Windows 8 and 10 with all drivers available, and I can tell you that it won't be slow dog not unlike a lot of people say, I don't have something similar (a HP Compaq nx8220) in common use. Keep as lean as possible (not bloatwares, anti-virus etc.) system, and it will serve you well.

• When you try to upgrade using the Windows Anytime Upgrade feature, it tells me to use a different key.

  Upgrade in Windows 7 Home Premium to professional

  I have Windows 7 Home Premium (OEM Version) installed in Australia and bought a Windows 7 Professional upgrade key in the United States. When you try to upgrade using the Windows Anytime Upgrade feature, it tells me to use a different key, yet my upgrade pack tells me to use the Windows Anytime Upgrade feature! I bought the upgrade from a reputable store in San Francisco. Any ideas why it does not work?

  What is a retail upgrade or full version or an Express upgrade?

  If its OEM license, it will not work.

  If at any time the upgrade fails, Windows Anytime Upgrade Fail:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• I installed an improved version of the Adobe Acrobat Pro DC but I think I had to install the full version.  I used the free 30 day trial and come to understand that I have to get the improved version.  I am it could o

  I installed an improved version of the Adobe Acrobat Pro DC but I think I had to install the full version.  I used the free 30 day trial and come to understand that I have to get the improved version.  I'm to understand that he could have the wrong choice on my part.  How to get the version that will work for me, without being charged double?

  Thank you

  Kris rake

  Hey Kris,.

  Its a double wire.

  Please continue the discussion here: I installed an upgrade Adobe Acrobat Pro CC and I think I need to install the full version.  I was using the free temporary version of 30 days and so I thought I should just get the upgrade

  Kind regards

  Ana Maria

• Anyone else have problems with the unethical choice to use the word "updated"?

  Does anyone else have problems with choosing the unethical to use the word "update" when what is going on is an UPGRADE that requires of new licences and payment?

  "updates" don't involve payment, make "improvements".  Given that you posted in the forum of creative cloud, if you have a subscription paid and that you are asked to pay more than the cost of the subscription it is more likely a problem with your installation/account.

• How can I get the free update to CS6?

  How can I get the free update to CS6 promised when I bought CS 5.5 student edition?  I bought 5.5 right before 6 is out and part of the package was that the upgrade was free when 6 is out.

  I don't know if a promotion that has been designated two years ago is still in force today, but you can check with Adobe Support by chat or phone and find out.  If the upgrade is still valid then they should be able to direct to the acquisition.

  Here is a link to a page with options to help make contact:

  http://www.Adobe.com/support/download-install/supportinfo/

• Use the host update utility or install ESXi4 Installable Update 2?

  I have 3 ESXi 4.0 host and you want to upgrade to 4.0 Update 2 and never really used the host update utility, but I doubt if Host Update Utility allows some dirt or something.
  
  I've read in a book but said nothing, while it records the settings of network, security and storage.
  
  What could be better? Use the host update utility or install ESXi4 Installable Update 2?

  Kind regards!

  If you have found this information useful, please consider awarding points to 'Correct' or 'Useful'*.

  Host update utility is the safest way to do it - and you will save the local VMFS more your configuration.

  If you go directly to the host with the installation CD, your configuration will not be saved, just the VMFS (that with ESXi). In addition, is a way of failure to take in charge of the upgrade.

  Dirty? With ESXi, I really doubt...

  Marcelo Soares

  VMWare Certified Professional 310/410

  Master virtualization technology

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• MY phone is 6 and my phone using the last update (9.3.2) when I type the time massges is stuck... (VIber, imassge, wts place) How can I solve this problem?

  MY phone is 6 and my phone using the last update (9.3.2) when I type the time massges is stuck... (VIber, imassge, wts place) How can I solve this problem?

  Now its all ways stuck not only type

• After you have installed the free updates for Vista Home Premium 64 bit, Windows will not start

  After that I installed the free updates to service pack 1, the system goes through 2 of the 3 steps, while it recharges, then the system does not boot?  To get the computer to work again, I need to run the repairer of Windows, which allows you to restore the system to an earlier point?  Does anyone have an idea how to fix this?

  Do your system restore, then:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

  When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

  I'm not that computer literate and do not understand what needs to be fixed.

  This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

  I use ESET Antivirus Node32 software.

  Hello

  1. What is the error message or an exact error code?

  2 have you made changes on the computer before this problem?

  3. you try to check the updates?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Reset Windows Update components and then try to download the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

   

  Method 2:

  File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

  http://support.Microsoft.com/kb/310747

  Please respond with more information so that we could help you more.