I deleted by mistake the pic files, ran sys restore from an earlier date, always missing, suggestions
try to burn photos to a cd, pic files deleted by mistake, can not find all the files. has a restored system since 2 days earlier (point), files are still left, they are not in the trash. anyway I can find/restore the photo files?
Hi and welcome to the forum. Unfortunately, the system restore does not monitor and/or backup of personal data. This is left to the user. It only back - up system files. However, your photos can probably be recovered using Recuva from Piriform, the creators of Ccleaner. Stop using the computer NOW. The more you use it, more files will be overwritten and destroyed. When you use Recuva to recover the files don't be a noob. Read the help text. It is because they know how to use their software. If your system has a logic or slave drive put the files recovered on it, or if you have an external one that works as well. Chances of recovery improve drastically by placing the recovered files on one drive other than the one they were deleted on. The link below is the portable version, it does not settle. It is a stand-alone application. This will also help since you're not going to install software.
http://www.Piriform.com/Recuva/download/portable
Tags: Windows
Similar Questions
-
I do a lot of work on the web and I have a ton of bookmarks that I use to maintain sites. I lost all!
I tried to install a new copy of the program and restore the file Mozilla from the library to the user (in time machine), but all I have is a white space where was the bookmarks bar! I also have a problem trying to re-enter manually all bookmarks. I can open the bookmark drop down, but I can't save all bookmarks. Firefox don't mark all new pages. I still all the passwords in the preferences if I don't want to install a new copy of the program and lose these.
Are there other system files that Firefox uses that I can restore the backup to solve the problem?
I have a Mac Pro and I am OSX 10.6.4
I have used Firefox for years and never had a problem before.
Can anyone help - please?This may be a problem with the places.sqlite file that stores the bookmarks and history.
-
failure of the system restore
mmattison,
From what I found, it seems that there is a file attached to a virus\malware. You attempt to clean your system to get rid of this problem. This thread covers the ways to eliminate the malware\viruses.Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Ideas:
- Outlook 2003
- deleted by mistake the column FRON in the list to the Inbox - how do I get it back?
Here's an example of adding columns to a view Outlook 2003
I hope this helps.
Microsoft® Security MVP, 2004-2009 -
I just downloaded Lightroom 3 (to 3.6) and once I installed and opened it, it said that there is an error changing modules. I deleted and reinstalled the .dmg file, and it still gives me this error. Can anyone help?
-
How to replace the SWAP file. SYS that bulky and bulky?
Hello
My question is how to replace the SWAP file. SYS that is bulky and bulky?
Is it possible to "BRING" different "restore points" as separate files and reduce in size for the management and portability?:
The simple answer to your question is no!
Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download to your OneDrive (formerly Sky Drive), share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.
For assistance OneDrive see paragraph 9.3:
http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm -
This is my first time using this forum. I hope that my question made its appearance and that this space is to respond to the answers possible, but just in case, here's my question again:
On a PC using Windows and Adobe Reader, I sent 10 PDF files in a zip file and each label of the PDF file with a number from 1 to 10, so that they appear in the order I want. Numbered 1 to 9 records fell in the sequence automatically, but the number 10 appears under the number 1 instead of below the number 9. I googled the problem, do not see addressed. I called Microsoft, and they said it's a matter of Adobe. If anyone can help I would be grateful.
Thank you.
Not an Adobe issue at all. If you want your files to a single digit (1-9) to appear before the 10, you must add a zero at the beginning.
01
02
03
04
05
06
07
08
09
10
-
Afer, try a restore and the system goes through the steps, I get a screen that Simon "your computer could not be restored to an earlier date and no files have been modified.
Hi wetmartinia,
1. do you have security software installed on the computer?
2. did you of recent changes on the computer?
3. you receive an error with the message code?
Method 1
In many cases software security installed on your computer may interfere with the process of restoration of the system on the computer.
I suggest that you disable the security software on the computer and then perform the system restore, check if it works.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Also see the Microsoft article below.
How a software antivirus and system restore work together
http://support.Microsoft.com/kb/831829
Method 2
If the previous step fails, then view the event logs to investigate System Restore service errors, post back with the details.
(a) click Start, click run, type eventvwr.msc/s in the Open box, and then press ENTER.
(b) click on the category System .
(c) click the Source tab to sort by name, and then look for "sr" or "srservice." Double-click each of these services and then evaluate the event description for any indication of the cause of the problem.
Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP
http://support.Microsoft.com/kb/302796
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
ORA-01152: 1 no file has been restored from a sufficiently old backup
Hi all
I have restored my database,
and after it's over, I've tried.
RMAN > alter database open resetlogs;
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure to modify the order db at 2010-05-26 14:53:08
ORA-01152: 1 no file has been restored from a sufficiently old backup
ORA-01110: data file 1: ' D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSTEM01. DBF'
is there a solution to the situation?
Thank you
UgurHere is the explanation:
ORA-01152: file string has not been restored from a sufficiently old backup
Cause: An incomplete recovery session was launched, but an insufficient number of logs have been applied to standardize the data base. This file is always in the future than the last applied log. The most likely cause of this error is forgetting to restore the file from a backup before proceeding with an incomplete recovery.
Action: Apply more marbles until data is coherent or restore the database from a previous backup and recovery of repeat file.
Also, check out the following link:
http://oraware.blogspot.com/2008/05/ora-01152-file-1-was-not-restored-from.htmlPublished by: Kamran Agayev, a., 26 May 2010 17:02
-
McAfee, updated yesterday, Saturday, and now I have problems. Tried to restore to an earlier date, but whenever the computer goes through the process, but ends by saying that he could not make the changes. My system is XP Professional.
Hello
Have you done that you are connected under an administrator account? -
Vmx and logs deleted by mistake on ESXi files
Hello guys. I need help please, as the title says, today I made a mistake on the storage, there was a file with the name of a previously deleted virtual computer. So I thought it was garbage and deleted. Then an error occurred that could not remove the vmdk because it was in use.
But in fact, it has removed the log files and the vmx file. I found the instructions on how to get it back, and all I have to do is to create a new virtual machine pointing to the previous virtual machine disks. Of course, I need to stop the server for this.
If I manually navigate the storage, I can see the vmdk, but when I try to select it with the wizard to add a new disk, they will not appear. I tried these options:
(1) create the virtual machine and in the select Disk drives option, select existing, but as I said when I sail, I see no hard.
(2) copy the disks to the same directory and see if they appear when you add a new disk.
(3) Create VM without disc, then add a new disk by navigating, even when I can't find the vmdk.
I can't find where to head the previous drive to the new virtual machine.
Is it because I am using ESXi?
Or I'm I missed something?
This is what it looks like now
Thanks for your help.
Interestingly, after watching the disk sizes, it looks like the thickness of the disks provisioned. A 80 GB drive and a 250 GB drive.
In this case, you can follow the steps in http://kb.vmware.com/kb/1002511 to recreate the header files. If you have any questions about this, feel free to ask.
André
-
Problems with the .exe file programs + System Restore does not respond when you click
I have Windows Vista. This problem started a week ago. I tried at first to use my "ccleraner" already installed, but this program does not open when you click on it. I was asked to choose the program that the application to use to open it. This has also happened when clicking on itunes. My avast program when you click also asked which application is required to open it. When it finally scanned my system it does no propblems. In addition, I tried to turn on windows defendrer as he told me that it was off. Clicked on 'Turn on..' and nothing happened. Help!
Hello
See the following message to solve the problem of .exe if necessary once you are sure that the system is clean.
Try Mode safe mode with networking - repeatedly, press F8 that you start.
The best two methods allow scanners to run and/or AV.exe out of the way or removing.
1.
CTRL SHIFT ESC - task manager OR right click on the taskbar - task managerProcess tab - complete the process on AV. EXE and continue with the uninstall Guide.
If necessary use start - computer or Windows Explorer to navigate to
C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
is installed.Right-click on it and rename it to ZZMbam.COM (or something different than now), then
Double-click it and run it like this. You can rename it back later. Do the same with others
programs as needed. Use this method for other necessary - DO NOT ASSUMER one
program removes all or that there is no other malware.---------------------------------------------------
2.
Another method is to use them:Use Process Explorer to "Suspend" the process will not stop
Then use AutoRuns to delete the malicious program startup items.
Now use UnLocker to delete the files in the malware.
You may need to do a file at a time.
Process Explorer - free
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoRuns - free
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspxUnLocker - free (do not install the adaware Ebay)
http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtmlAV.exe
==============================================
There are MANY varieties of these with many names, but all can be eliminated with the same methods:
Win 7 Antispyware 2010 XP Internet Security 2010 and Vista Antivirus 2010 is rogue antivirus.
scams to get you to pay for them while they have no advantage at all.How to remove all THE varieties of this malware - please read carefully the removal Instructions.
http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
in the regular when windows you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
UnHackMe execution)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download
here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
How to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
taken (such as the anti-virus software, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://OneCare.live.com/site/en-us/default.htm
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
I designed a report using IReport tool with a text like "BOLD", that generates the report in PDF format. When I open the file with Adobe Reader IX it opens perfectly.
but the problem when I open the same file in mozilla Add on "Adobe Reader 11.0.3.37" and in previous versions, is not displayed the "BOLD" font.
I solved it... the problem is not with mozilla add on... the problem is in jaspersoft...
in any case thanks for the reply...
-
I bought a new video camera and Movie Maker on my computer does not recognize the MPEG2 files as video files. He brings only in the sound. Is there something I can do?
I bought a new video camera and Movie Maker on my computer does not recognize the MPEG2 files as video files. He brings only in the sound. Is there something I can do?
======================================
You run Vista Movie Maker 6? Might be interesting to try
Convert MPEG files to WMV format before importing.Or... it may be interesting to try to install Windows Live Movie Maker...
which could be compatible with the MPEG2 files.Windows Live Movie Maker
http://explore.live.com/Windows-Live-Movie-Maker
(There are other applications included in the download...
Uncheck the ones you don't want)Good luck...
Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
My Windows DVD Maker seems to hang after I click the button 'Next', so I looked in my event viewer for more details. I met that a failed module named 'iac25_32.ax' is the source of my problem. To remove it, I went to my command prompt (cmd.exe) and enter the following text: "regsvr32 /u iac25_32.ax' to try and unregister the codec file.
Here is where my problem occurs: Once I hit enter, I get an error code reading - 0x8000ffff. Why won't my order process?
Characteristics of code error : "iac25_32.ax" module was loaded but the call to DllUnregisterServer failed with error 0x8000ffff
How can I solve this error 0x8000ffff code?
Note that attempting to unregister a DLL that is not registered currently produces a similar to the following error dialog box, regardless of the version of Visual J ++ was used to create the DLL:
RegSvr32
DllUnregisterServer dans...\Project1.dll failed.
Return code was: 0x8000ffffFIX: onCOMRegister not called for the VJ-Generated COM DLL
http://support.Microsoft.com/kb/223339Have you ever tried save this file?"iac25_32.ax" is a DVD MPEG-4 filter, as it is not a .dll file or not an .ocx file, perhaps it can be saved or unsaved in all cases, but other seem to suggest so it could be possible?create dvd Windows has stopped working
http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/98fde193-d4e6-417f-8b37-16661e6c6a3aHere are a few links of Codec.Vista Codec Package Final v5.4.3
http://www.MajorGeeks.com/Vista_Codec_Package_d5326.htmlBasically, the K-Lite Mega Codec Pack is going to play all video files on this planet.K - Lite Mega Codec Pack
K - Lite Codec Pack Full (less features)K - Lite Mega Codec Pack 5.6.1
http://www.free-codecs.com/download/K_Lite_Mega_Codec_Pack.htm
Maybe you are looking for
-
TEMPRO V2.2 - cannot accept and display privacy policy
I have Satelite L300 and use Windows Vista Home Premium. I just upgraded Tempro to version 2.2, now he asks me to read and accept the privacy policy but when I click on the button view and accept it executes a routine back C\Program Toshiba Tempro\Te
-
Local property node on the VI Analyzer VS variable
Hi I'm preparing my review of CLD. I had this problem... I learned that there are two methods to update the icon on front panel using the value of the variable local node and property It is not a good method to update an indicator using these, but if
-
LabVIEW 2014/2015 break with my library of wrappers
I have a lot of LabVIEW package screws saved in LV8.6 library, they almost all containing call library function node. Recently, I was working on a new program that uses these library live I have found that when you use these screws it causes LabVIEW
-
can [4820tg] I replace my hard drive and always keep the Windows license?
Hey! A quick question, on an older laptop that is still alive. Acer Aspire 4820TG Windows 7 family Can I replace the hard drive and install Windows again? I mean, I burned the recovery CD or software any Acer asked when the computer was new. Those ca
-
Wireless Desktop 3000 (with 2.4 GHz transceiver v6.0) not recognized XP
I bought two games Wireless Desktop 3000 with the intention to replace the cord of the configurations on two desktops on XP Pro SP3. On two XP computers, plug the transceiver gives an error "unknown device", with the driver, do not load. Is it possib