I did the recovery manager in my hp laptop now asking me for a disc I don't have?

Similar Questions

• USB keys - problem with the Recovery Manager

  I bought a 16GB Kingston DataTraveler 112 USB key so I could copy the recovery as a backup image. He acknowledged the USB key and showed that the recovery image has been slightly more than 11 GB. But when he started to format the USB key, it returns to the previous screen and asking more of the car. At the bottom of the screen, he said to contact the HP Support, but it gives me an error message. Now when I try the Recovery Manager it does not recognize the USB at all.

  Before that, I had bought another 16 GB USB - don't remember what brand. I have 5 other USB drives, but they are all small, except a 32 GB Kingston DT101 G2 which does not work on this computer, even if it worked on my old computer (Pavilion w/Vista Home Premium) without problem. All these USBs, including the new Kingston are for USB 2.0.

  Operating system is Windows 8.1 64-bit on the desktop HP Pavilion 500 - A60. I tried the problem that USB keys in all 4 ports (2.0 and 3.0). Also in that I plug into a port to give me 3 USB ports, also used on my previous computer.

  Is it possible that this computer does not recognize Kingston or some other brands of USB thumb drives?

  The trick to this is to use a USB 2.0 port and use a non-windows 8 certified thumbdrive. If the USB flash drive shows as a 'removable device' there should be no problem in the use of the media to create a recovery media

  I had a lot of success with a 16 GB Transcend USB 3.0 flash drive.

  I own a couple of DataTraveler flash drives and had the same lack of success, creation of recovery media that you did. I have had zero success with 3.0 of Sandisk Extreme usb flash drives

• By using the Recovery Manager to repartition the HARD drive

  I started a post a few days back on my pavilion DM1-3014AU netbook that runs on AMD APU-E350, 2 GB of ram and comes pre loaded with windows 7 Home Basic. I had a number of requests because I want to repartition the hard drive, do a fresh install of windows 7 my disc and I also want to keep some of the hp software.

  After going through a few messages in this forum, I learned that we can use the Recovery Manager to do a minimal install, IE windows 7 and only the hp software. That's what I have to do unless I also want to repartition the hard drive.

  I currently have 4 partitions, C drive, hp tools (hidden) and backup (hidden). I have already created recovery disks. Now, my questions are:-

  1. can I use recovery disks or Recovery Manager to delete all existing partitions and recreate my own partitions. This means that I would remove the recovery, tools and backup partitions.

  2. After doing the above I'll be able to do a minimal install (os + hp software) via the Recovery Manager or the recovery disks.

  3. my intutions are that I can accomplish the above two using the recovery disks and not the recovery partition. If the above two steps are possible using recovery discs, it would ultimately have no partition on my hard drive recovery. I will then be able to use the recovery disks in the future to make the same minimum install (os + hp software)

  4. I wouldn't really keep the recovery, tools and backup partitions if they can be of any complacency in the future but the reson why I want to delete them, is that windows 7 Home Basic allows no more than 4 partitions and I want to be able to create at least 4 partitions for my use.

  Any help would be really appreciated...

  Yes Vikrant... it is unnecessary to install UEFI to update BIOS.

  Yes, if you install the update to the BIOS using the link I provided in my previous thead element, you can as a revert to a version of BIOS as soon as possible if you feel that the system is unstable.

  Even if you reparition the whole HARD disk and do a manimized install, you can install the BIOS update in the future.

  Updating the BIOS is independent if you did full recovery or minimizes recovery.

  BIOS update will not affect the use of recovery disks and procedures. You can safely use them in the future without any problem.

  You will use the ability to run F9 diagnostics incase of any software system crash, and you are unable to start Windows.

• Enter the Recovery manager from the start screen

  My HP dv7-4296nr laptop, I have an included recovery partition. But I can't access Recovery Manager in the start screen by pressing F11, when I pussed, it starts only to Windows normally, although in the lower left conner, it displays "F11."... System Recovery '. Only when I activate the recovery partition and restart, I can get into the Recovery Manager. Could someone told me what I have to do to fix this?

  Hello

  Before trying the suggestion below, make sure that you have backed up all your personal files, etc.

  If you created your set of recovery DVDs, you can use them to reinstall the operating system that this process will also recreate the recovery Partition and so I hope to see the f11 feature.

  Kind regards

  DP - K

• Vista will not start. Loop continues to the Recovery Manager.

  I can't cross the Recovery Manager.  I tried a restore.  I tried to boot into Safe made.  All roads lead to Recovery Manager.  I get a blue screen that begins with the System Recovery Options

  For any info re .fbw format files backed up, contact HP directly.

  http://www.allformp3.com/extension/what-is-the-FBW-files.html

  You have several choices for the way to resettlement; read the info below...

  And is also included in this response data recording methods.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Your main hard drive data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• On the boot system is "system restore is scanning" message and then it opens the Recovery Manager

  When I try and start my other Hp laptop it says to the system restore is looking for errors, then it passes to the Recovery Manager. I want to use the system recovery. File backup program it tells me that there is currently not enough free space on the system partition for temporary storage during compression. You must free space on the system partition to continue the task. I'm trying to save up to my external hard drive which has 930 GB of free space is a way to simply copy the hard drive the computers together? All my children pictures are on this laptop does - what should I do to save my files? I have also a 2nd laptop the exact same model that works is there a way I can copy files to it. They are 449WM HP G71 and use 7 64 windows operating systems. Is there a way I can connect two laptops, and then access that it wont startup files. It is the important gathering I have video of my daughter being born so that at least 1 photo of her every wek since she was born any advice would be greatly appreciated

  Hello

  I suggest buying a USB SATA docking station and backup all needed files on the external hard drive through the work laptop...

  http://www.pcworld.co.uk/gbuk/cnm-hard-drive-docking-station-for-2-5-3-5-sata-internal-hard-drives-01992148-pdt.html?srcid=867&xtor=AL-50&istCompanyId=9a35962d-802d-4e67-9721-0a3328ca1f02&istItemId=mrpwxxx&istBid=t

  All you have to do is remove the hard drive work, adapt it to the docking station and connect the station to the laptop. It will work as a drive external hard usb.

  When you have finished the backup, create an image backup disc system on the work laptop and use it to restore the other laptop...

• What did you do for Firefox? I don't have the left arrow key or arrow - I can't type in the url box - Firefox has suddenly become USELESS!

  I clicked on 'Customize' as you suggest, am the arrows and the area url, you click on ok, and everything is back to what I had already. I know, except for a really quick fix, I have to go back to IE.

  Hello

  I'm a bit confused. Your title says
  

  What did you do for Firefox? I don't have the left arrow key or arrow - I can't type in the url box - Firefox has suddenly become USELESS!

  Yet your said OP
  

  Click on 'Customize' as you suggest, am the arrows and the area url, you click on ok, and everything is back to what I had already. I know, except for a really quick fix, I have to go back to IE.

  Your problem is resolved or not?

  Right-click on an empty space in the toolbar, then click Customize, then click restore default value

• Just did the Lightroom update to 2015.4 and now I can not launch LR. "Met Lightroom user authorization problems."

  Just did the Lightroom update to 2015.4 and now I can not launch LR. "Met Lightroom user authorization problems." I hit the repair button continue and I get a message that Adobe is unable to solve the problem, I have to do it manually. I followed the steps to allow permissions for preferences and Adobe and Caches and always LR launch. Help!

  Hi Mariej,

  If please check the following link and let me know if it helps: Lightroom has encountered problems of the user's permissions. Bridge of Photoshop Lightroom crashes or hangs at the launch

  Kind regards

  Tanuj

• Ive bought and downloaded adode acrobat Pro DC and its now asking me for the previous issue. I don't have it. He told me to uninstall the previous version of adobe so I did I don't have the password for the trail version more. How can I fix? I cannot ope

  Ive bought and downloaded adode acrobat Pro DC and its now asking me for the previous issue. I don't have it. He told me to uninstall the previous version of adobe so I did I don't have the password for the trail version more. How can I fix? I can't open any pdf on my computer now.

  Hi brets49833316,

  If you have purchased Adobe Acrobat Pro DC as an upgrade, then a serial number of the previous version which you have like Acrobat X or XI. If in the case where you have not bought one of these in the past, then you must buy Acrobat Pro DC as full version (US $449.00).

  In this scenario, you can return the version upgrade and purchase the full version. To return the Contact Customer Service

  Thank you

  Abhishek

• My watermark came before I did the recent update on CC 2015, always when I would export to PhotoShelter.  Now, the watermark does not appear.  I asked PhotoShelter for help and they said they have heard about other problems.  How ca

  My watermark came before I did the recent update on CC 2015, always when I would export to PhotoShelter.  Now, the watermark does not appear.  I asked PhotoShelter for help and they said they have heard about other problems.  How can I solve this?  Nothing has changed on my computer.  Thank you.

  Sharon Cameron

  Hi sharonc,

  Have you tried to reinstall the plugin Photoshelter for Lightroom CC newer version 2015.

  See the below for the upgrade to the latest Version

  https://support.PhotoShelter.com/HC/en-us/articles/203373590-PhotoShelter-s-official-Adobe - Lightroom-Plugin

  Let us know if that helps.

  Kind regards

  ~ Mohit

• If I click on an email link in a web page instead of an empty message is opened I still get noise toward the top of the screen with a log-in for googlemail. I don't have and won't have a googlemail account. I just want to be able to send e-mail messages b

  If I click on an email link in a web page instead of an empty message is opened I still get noise toward the top of the screen with a log-in for googlemail. I don't have and won't have a googlemail account. I just want to be able to send e-mail messages by using Outlook.

  See this article.
  
  http://support.Mozilla.com/en-us/KB/changing+the+e-mail+program+used+by+Firefox

• I am trying to intall the new adobe flash but its not allowing and continues to tell me I don't have enough privaleges to add this item.

  How do we change privalages

  I am trying to intall the new adobe flash but its not allowing and continues to tell me I don't have enough privaleges for add this... even though I am the administrator on the computer?

  Hello Victor,.

  Try to run the Setup file of Adobe Flash Player as an administrator by following the instructions in this article:
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

• I need a serial number to download the edition of Acrobat Pro DC schoolgirl and her teacher for MAC (download).  All I have is a product key.  I need the serial number to activate.  How can I get a serial number?  I bought the product download on amazon.c

  I need a serial number to download the edition of Acrobat Pro DC schoolgirl and her teacher for MAC (download).  All I have is a product key.  I need the serial number to activate.  How can I get a serial number?  I bought the product download on amazon.com

  Hello??

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  - and https://forums.adobe.com/thread/1572504

• Some time ago I found a copy of Photoshop 5.5 (APPLICATION and TRAINING) of the CD in the trash. I'm finally moving around trying to use it, but I don't have a serial number. I have the CD original, copies illegal not - how can I get the serial numbers

  Some time ago I found a copy of Photoshop 5.5 (APPLICATION and TRAINING) of the CD in the trash. I'm finally moving around trying to use it, but I don't have a serial number. I have the CD original, copies illegal not - how can I get the serial numbers to use to get this program to work?

  Sorry to say that you are out of luck.

  Serial numbers came on the cd case. If they aren't there, you have no way to use the program except as a 30 day trial. Adobe CS5 licenses no longer sells.

  Gene

• tried for three days trying to get this working and I've already tried some of the suggestions forum and it's just to try... so happy I don't have pais nothing yet. I get out the signed loop no matter what I try

  tried for three days trying to get this working and I've already tried some of the suggestions forum and it's just to try... so happy I don't have pais nothing yet. I get out the signed loop no matter what I try

  While in have you really tried? It's the standard solution, and it works in all cases that I have heard (including mine). Just rename the file, and a new one is created on the next launch.