I do not see the 'working area of rendering.

Similar Questions

• The radial filter guide shows only not in the work area

  I upgraded to Lightroom CC on the release and recently made the last update.  Now my radial filter does not show in the work area.  I can turn it on in the selective settings panel, but there are no guidelines indicating the size/shape of the mask.  The mask shows when I check/uncheck the mask Show Overlay box or the 'o' key (keyboard shortcut), but still no guidelines.  Radial filter appears in the history panel as well.  The selective brush seems to operate normally.  I'm on an IMac using OSX 10.10.2 2013.  I quit and restarted Lightroom CC so that rebooted my machine.  I don't have this problem on my MacBook Pro that has been updated at the same time.

  Help, please!

  Phil

  Press H

• Hit the Enter key or don't choose "make the work area" no rendering occurs

  I recently migratated all my photos and my projects from one computer to another, a new.

  In collaboration with ss12.

  I'm trying to make a project that I created, but when I press the Enter key, or even to choose "Workspace to return" in the menu timeline, instead of rendering, it reads back the project.

  Anyone know what is happening? Please?

  Hi Love_Green_Turtles,

  Please post on the Adobe forums,

  If the timeline plays instead of rendering, this means that you need not rendering.

  Regrads,

  Sandeep

  Post edited by: Sandeep Singh

• When I open an image in Photoshop, I can not see the file.  The thumbnail on the right, but I do not see the image on the work area. I use Windows 8

  When I open Photoshop CS6, I can't see the image.  The thumbnail is visible on the right side and the work area shows file information, but not picture.  I've updated PS, my driver. The same goes for the jpg or RAW.

  Make sure that your drivers are up-to-date. Try to disable the GPU acceleration in preferences then restart Photoshop.

  Benjamin

• When I m showing police area I do not see the type fonts? Why? or why I can do to fix this?

  When I m showing police area I do not see the type fonts? Why? or why I can do to fix this?

  Mijail,

  I think that it can fix:

  Open system preferences and go to accessibility. Then select display in the source on the left side list, then check the box transparency reduced.

  It was introduced in this #15 post by TheUlser:

  https://forums.Adobe.com/message/6854594#6854594

  It has been described on this page from Adobe:

  http://capitalmacservice.com/font-preview-working-Illustrator-CS-5-Yosemite-fix/

  It may also depend on the monitor, as shown in the message #29 by Loncar in the same thread.

  Of course, this also affects other things so there can be a downside to it, of course, the influences of transparency reduced the appearance of other things, but so far nobody complained disadvantages.

• laptop does not see the disk of works 9

  I have works 9 and I want to install it on my HP laptop with windows vista home premium as a the opp system.
  My laptop does not see the cd or one of its files... The packaging says it's compatible with windows vista.
  It works on my desktop which has windows xp system opp on him.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  For any problems with your computer, not reading CD, ask in the Forum Vista Hardware at the above address.

  See you soon. Mick Murphy - Microsoft partner

• How can I change the layout or the size of the photos in my Gallery?  I have started a project and downloaded some pictures of her.  Now when I click on projects opens the gallery page and I do not see the pictures because the vertical photographs are dis

  I have started a project and downloaded some pictures of her.  Now when I click on projects opens the gallery page and I do not see the images because the vertical photographs are displayed on the monitor.  I tried all layouts different portfolio and it does not change the way my photos appear in the gallery.  They are too big!  Here is my example.  Astriya photography

  Thanks for the help!

  Place the cursor over an image and a pencil appears on the side. Click on it and you will get the options including one to change the width and alignment. This seems to be the only option currently.

• I try to install Lightroom 4 on a new machine, but the media are hosted by Adobe.  I can see my license number but do not see the option for download.  Y at - it a link to the downloads for this media on the Web site?  It does not appear in my one Adobe

  I try to install Lightroom 4 on a new machine, but the media are hosted by Adobe.  I can see my license number but do not see the option for download.  Y at - it a link to the downloads for this media on the Web site?  It does not appear in my Adobe account.

  Adobe - Lightroom: For Windows

  Adobe - Lightroom: For Macintosh

  Mylenium

• First Pro CC does not my images using the space bar or the button "play" on the work area.

  First Pro CC is not my images using the space bar or the button "play" on the work area, I can rub but can't play.

  Ok. Downloaded the update of Blackmagic and got Audio and reading! great, now the only thing missing is the fact that display power videos don't go to the SONY's Trimaster of 5 thousand dollars which is connected to the Blackmagic and where I should introduce all the movies to my boss. had this problem on CS6 - returned to FC7 because of that and if it cannot be solved will have to do it again. the preferences panels are no help.

  In fact, im only using the first because my boss wants that the entire Adobe workflow, but the boy is mute first. (always love AF)

• Pe10: open a project saved previously and made, the work area shows the sections not cooked

  Pe10: when I open a previously saved and made project, the work area shows a majority of the sections not cooked.

  When I opened a project previously recorded and released, the work area indicates the sections not cooked. My project is about 59 minutes and 27 seconds.

  What to do to have a saved and rendered project, reopen when released?

  PRE10, clips with the stabilizing effect that have been made and recorded to be returned again when you open the project again. I haven't met any other situations where this is happening. PRE8 and PRE9 it y to other situations.

  What effects applied to clips to be rendered again? Is there media coming to overlap on the other tracks, and if yes, what type of media is, the image? text? video?

• Software JetDirect 380 X can not see the airport card in the laptop G4 PPC

  Hello

  I tried to add a customer to the airport. It's a LaserJet 1200. But the software that comes with the JetDirect tells me to install an Airport card in the laptop. Now I can join hpsetup and print to the LJ 1200. But in practice I have to disconnect from the internet and the map Airport.  So, I know the JetDirect and LaserJet 1200 work very well. I tried different settings on the airport, but nothing has really changed the software on the laptop not finding the Airport card.

  Now I have a WOW goes a Xsense MIH 130 Xrouter, then go to the Airport Express Terminal. All Mac desk top of page 933mh, 1.67 ghz powerbooks. I use OSX10.4 to 10.5.8.  I don't know if the router is the problem or if the parameter in the jetdirect should be changed to the ad-hoc to something else. Don't know how to do this. With it, do not see the map Airport, I can't do the enbedded 192.0.0.192. There are a lot of maybe if I do this or if I do this it might work. Since the configuration of the printer in the TCP/IP section page everything below the line, Config by: is not specified.

  Thanks for any advice.

  Well again I was able to get to the stage 1.6 (in 10.5.8 printing Center is not the same). I could remove the printer that was working on its own network of HP. But was unable to add a printer in 0SX 10.5. Perhaps through IP printing, but do I put as the address? It is the site of HP to get instructions on a 380 X and another printer.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & TaskID = 115 & prodSeriesId = 29789 & prodTypeId = 18972 & prodSeriesId = 29789 & objectid = c00257796

  Maybe I should to the left of the printer, but I've changed the SSID in the jetdirect to match the network. The IP printer 192.0.0.192 or 192.0.0.193 or just use the network name it was changed to?

  To close, but I thought a few times.

• Error message Microsoft Word "Word could not create the work file. Check the amount of disk space on your startup disk. »

  I have a MacBook Pro, retina 13inch OS X el Capitan Version 10.11.1 with 16 GB of memory. It's brand new and I have recently installed Microsoft Word/Powerpoint etc. a disc that I bought a few years to my previous MacBook. It seems to work very well, but whenever I want to open a word document a message comes up saying "Word could not create the work file. Check the amount of disk space on your startup disk '. However, once I click 'OK' this message disappears and my word file opens without a problem. I have 16 GB of memory on this laptop and it's new I have not reached anywhere near the maximum amount of storage so I'm puzzled as to what this message means. How can I avoid that this message popping up everytime I open Microsoft Word? Any help would be appreciated!

  This has nothing to do with memory - it's the SSD. Word tries to create a temporary file to use as a backup if the program crashes while you are working. First, run the Microsoft Update program to see if there are updates you have missed. Second, Microsoft currently supports only versions 2011 and 2016, so if yours is older, you should consider the upgrade. Thirdly, I suspect that the temporary file is not get created so that you have fewer cancellations (maybe any) and that if the program crashes you have to restore.

• all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  If I shut down the computer and plug... he sees the thing then turned back...
  I can not just plug in while the computer is turned on... once again he has used to do this just as well... for some reason any, he sees things now.
  any thoughts?

  Hi KK Waddell.

  Thanks for posting in the Microsoft Community.

  I understand that you face the issue with the USB port does not work when you embedded on the front of the computer.

  Before you start the troubleshooting steps, I need the information required.

  1 did you changes to the computer?

  2 did you receive an error message?

  I suggest you to check with the other USB port.

  I suggest you to see the links and check.

  USB port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  One or more USB devices may not work when you start your Windows XP-based computer

  http://support.Microsoft.com/?kbid=885624

  See also:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

• I installed Windows 7 on my computer. Its rebooted normally, but when he was loading files to the top of the color went all wrong... As you do not see the weight...

  Installation of window 7. ! With a problem! Help, please!

  I installed Windows 7 on my computer. Its rebooted normally, but when he was loading files to the top of the color went all wrong...

  As you do not see the weight...

  Please help me!

  • 512 GB of ram with a Flash ram Drive his 10
  • Windows aero does not support "as the scan did not say very important hahah: D.
  • Intel Inside Pentium 4
  • Reference Dell computer WITH a disk emachine hard and things 'VERY OLD '.
  • 149 with Flash Drive 500 GB hard drive

  Help, please!

  PS. Mr. need help! D:

  I can run vista Basic that lol

  I didn't mean that you cannot run Windows 7. I have run on systems with 512 MB of ram. It will work, but will slip. It will be the same for Vista. I recommend that stick you with Xp until you are able to upgrade your ram.

• Sansa clip + does not see the audio books I have loaded

  I got my Sansa Clip MP3 player + for two years and it works very well, so far.  I only use it for audio books.  Recently, I reformatted the player and loaded new books in.  When I went to read, the audio books folder was empty.  I have connected the player to the computer again, and the books were in the audio books folder, where I had loaded.

  I've updated the firmware to the V01.02.16A Version, and there was no change.  I tried to reset by pressing the start button. No change.

  Memory has 3750 MB with 3135 free, indicating that there are books in memory, but the player does not see the.  What is going on?

  That's all!  I checked the format of audio files.  It is the AAFC, with suffix .m4a.

  The Sansa manual says:

  "The Sansa® MP3 Player will support MP3, WAV, WMA, secure WMA, FLAC, Ogg Vorbis and audiobook formats.  I guess that AAC is not one of the formats that they support.  So I have to convert .m4a to .mp3.  I guess there are a lot of tools to do it.  Any suggestions about which one is the best?

  Thanks a lot for this revelation.