I don't hear my selections...?

Similar Questions

• I don't hear Roland 501 Piano during playback when recorded in Logic Pro.

  When I record my 501 Piano from Roland in Logic Pro, I do not have the piano through my speakers to read.

  Create an external midi track

  in the way - (port) Inspector to ensure that Roland is selected and all midi channel.

  When you reproduce the track it is routed to the 501.

  If you don't hear it - make sure that Roland is configured to accept midi in reading

• I don't hear anything

  Hey I've been trying to solve this problem since a week, with no luck.

  I don't hear anything in Skype, when I log in or when I give the word, but my friends can hear me well.

  I tried to reinstall Skype several times, whenever he says, "there was a problem downloading the Skype click to call the plugin" so I found a guide of how the installed correctly, but now it still does not work, I still can't hear.

  I have no idea what to do and im looking forward to get help here cordially [removed for privacy]

  

  In Skype, open Tools-> Options-> Audio settings. What device you selected here as your speakers? There is more than one option available in the select box? Can you hear any sound when you press the test next to the selection box?

• I just got an iPhone SE. But when I make a phone call, that I don't hear so good. The volume is all

  I just got an iPhone SE. But when I make a phone call, that I don't hear so good. The volume is. How can I fix

  Did you remove the plastic that covers the face off the iPhone when you buy?

• Skype, they see me but don't hear me

  Original title: Skype,.

  When I sign up for Skype, I have here and see them. They see me but don't hear me

  Hello

  1 Windows operating system you are using?

  2 has there been any changes made on the computer before the show?

  3. the problem only occurs with Skype?

  I also suggest you to check the levels of volume and push in the device properties in recording devices

  a. go to Start and click on Control Panel.

  b. click on her, then a new window will open.

  (c) in the new window click on the recording tab and right-click in the window and click Show disabled devices.

  d now check if the Microphone is listed there and right-click on it and choose Properties.

  e. after checking the levels of volume and thrust, check if the next volume bar microphone will move when you speak or type.

  If the problem is not resolved, please provide more information to help you best.

• Update blackBerry Smartphones - now, I don't hear anything

  I downloaded and installed the upgrade on my phone today. Everything seemed fine until I tried to make a phone call. There is no noise at all when I call someone, I can't hear them and they don't hear me. Also when I try to play mp3 files, they do not either.

  What should I do? I just want to make a phone call and I can not...

  johnnyz wrote:

  I took the battery three times and he repeats this to me.

  With the power on, you have removed the battery?

  Why try to plug headphones actually, use it, unplug it and see if it works?

• Fade out - I don't hear it

  I am a beginner. This sounds like a basic question, but for the life of me I can't understand this. I added a Visual fade a clip in a multitrack session, using the Waveform Editor. I see the fade out. I don't hear it. My apologies if this is obvious, I'm having a lot of trouble with that, especially in troubleshooting. Surprised I can't just chatter, considering that I pay monthly for it.

  John, I'm hearing, I'm sorry. It turns out that the fade is there, it was just subtle, so I don't notice it. My apologies, the bland and the other audio settings, take some getting used to and I find than deletion, I'm not happy with is a challenge to understand how - I am a novice. I appreciate your response!

• quick mask. When you press q after a quick mask of finishing, I don't see the selection. When I can't see the diagram of the opening levels. How can I solve this?

  quick mask. When you press q after a quick mask of finishing, I don't see the selection. When I can't see the diagram of the opening levels. How can I solve this?

  He has worked previously. I must have pressed some buttons or everything that makes this problem occurs.

• We noticed after our R12.1.1 and upgrade 12.1.3 Federal is not displayed and we don't have it selected on the choice of installation of ideas?

  We noticed after our R12.1.1 and upgrade 12.1.3 Federal is not displayed and we don't have it selected on the choice of installation of ideas?

  I never said that the installation is not very well

  You will need to consider additional steps for this product (set to level before and after upgrade) as mentioned in the doc.

  If the relocation is not an option, then connect a SR and see if the support for Oracle can provide workaround to change the status of this product.

  Thank you

  Hussein

• radio don't button no selection when I start the application

  Hallo,

  I have a radio button with a few buttons in it. I would like it when I run the application, none of the buttons is selected. There is a 'don't allow no property selection', but this allows the "no selection". My problem is that when I run the vi, the option button is on and I would like that all of the buttons.

  Thank you

  Ah, thank you very much. It works

• No sound on Skype on my computor, and they don't hear me either.

  On Skype, the image is fine onmy HP computor, but they can't hear me and I can not hear them, what do I do? Thank you in advance.

  Hello

  What operating system is installed on your computer?

  Method 1:

  I would say that microphone set as default, you follow the instructions below:

  1. Click Start and click on Control Panel.

  2. click on sound, then a new window will open.

  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.

  4. now check if the Microphone is listed there and right-click on it and choose activate.

  5. Select the Microphone, and then click "Set as default".

  Method 2:

  If the previous step fails I suggest also you follow the steps in the link below:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Also I suggest you to check the microphone settings in Skype.

  You can also post your request in the Skype community. Please visit the link below to find a community that will support what ask you:

  http://community.Skype.com/

• Skype number: I hear my contact but they don't hear me.

  Hello

  My problem is with Skype... I don't know if the problem of my PC or that person, I call... I can see them and hear them, but they can see me, but can't hear me.

  Michele

  E-mail address is removed from the privacy *.

  Hi Michele,

  Can I repair my Skype for windows audio settings automatically.

  https://support.Skype.com/en/FAQ/FA12165/can-i-automatically-fix-my-Skype-for-Windows-audio-settings

  How can I adjust the settings of the sound on my computer and in Skype for windows XP?

  https://support.Skype.com/en/FAQ/FA11032/how-do-i-adjust-my-speaker-volume-during-a-call-in-Skype-for-Windows-desktop

• I don't hear any sound on my computer

  I can't hear any sound from my computer unless I use aheadphone.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you follow the steps in troubleshooting the article mentioned below and check if it helps:

  How to troubleshoot sound problems in Windows XP: http://support.microsoft.com/kb/307918/nl

  For your reference: No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Hope this information is useful.

• don't forget the select result of a statement to be used several times in the procedure

  Hi all

  I'm sorry for this kind of question, I'm not newbie, but still need your help.

  My need is remember the select result of a statement to be used several times in the procedure.

  My first guess is to use a temporary table, but I think there's better decisions.

  For example, I should make a heavy request

  Select the code from table_function (param1)

  Then, this query is used to insert a list of the id in table1, delete table2 and update in table 3.

  Help me please do not use if possible temporary tables.

  If there is more than one column, you need to create an object type at the database level. Create a collection of this type of object in the procedure.

  Example:

  CREATE OR REPLACE TYPE "OBJ1" as OBJECT(
          column1 varchar2(256 CHAR),
          column2 varchar2(35 CHAR)
          );
  
  CREATE OR REPLACE TYPE "nt_obj1" as table of OBJ1; -- this could be done at procedure level as well
  
  DECLARE
     t_employee_ids   nt_obj1;
  BEGIN
     SELECT OBJ1(column1,column2)
       BULK COLLECT INTO  t_employee_ids
       FROM table1
      WHERE column3 = NNN
  .............
  .....
  

• I don't hear the sound of the iPhone 6

  I make my hear the sound of the iPhone 6 and when I call as I can't hear anything on the other side

  Hello. Visit this link please, https://support.apple.com/en-us/HT203800