I dropped my iPod 5 ANDS is weird

Similar Questions

• I dropped my iPod nano in water. It works again?

  Recently, I dropped my iPod in the water. It works again. I started to load and can see a watery screen!

  I fear that the damage may be permanent. Even very small amounts of water can corrode the very thin copper strips that form the printed circuit, and this may appear shortly after the initial event. In any case if you see water in it certainly does you not load. You should leave it for a while so that the water evaporates: he popularly believed that put a bag of rice (uncooked) will help as the rice will help to absorb water - in any case, it can do no harm as long as you leave no grain of rice or dust into the device.

  But you should be prepared to conclude that eventually it stops working.

• I recently bought an ipod touch and want to play on my Bose SoundDock. Is there an adapter to make it work?

  I recently bought an ipod touch and want to play on my Bose SoundDock. Is there an adapter to make it work?

  Assuming that your Bose product 30 connector pins old, it is Apple for Lightning to 30-pin adapter

  http://www.Apple.com/shop/product/MD823AM/A/lightning-to-30-pin-adapter

• 31.1.0 and 31.1.2 drop down menu commands and commands "right button" very slow... what to do?

  My TB version 31.1.0 and 31.1.2 drop-down menu commands and commands "right button" very slow... All other menu programs bars will work perfectly. Tried disabling McAfee, no diff. TB collects e-mails, wrote e-mails to a normal speed without problem. Control S, V, P, etc work but slow... what to do?

  To diagnose problems with Thunderbird, try one of the following:

  • Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.
  • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

• 7th generation iPod connected and says sync completed immediately but no music transferred

  new 7th generation iPod connects and configure the sync seems ok, but the iPod shows

  icon for 10 seconds and the iMac to sync iTunes say synchronization is complete but not transferred music

  Check the tab music for the device that you have selected is part of the content to be synchronized with the device.

  TT2

• Hi, I just got a second generation ipod nano, and whenever I have unplug the charger a line crosses the screen. Help, please

  Hi, I just bought a used second generation ipod nano and whenever I have unplug the charger a line crosses the screen and I can't do anything with the ipod. Help, please.

  When you do a Reset (reboot) on the iPod

  Learn how to reset your iPod - Apple Support  (see iPod with a click wheel)

  do you see this line on the screen when the Apple logo?  If you do, it is probably a hardware problem.  If the line is not there at the start, but returns after the iPod starts, you can do a restore of the iPod using iTunes.  This d erases the IPO, reinstall its software and sets it to the default settings.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  If the problem persists after the restore, the cause is likely to be hardware problem.

• drop between mid-2009 and IOS device does not

  Mid 2009 Macbook Pro running El Capitan. Bluetooth and wifi on. When I opened Airdrop I see only the symbol of release with message "drop we will share you instantly... to share with someone using a Mac, ask them to go to Airdrop in the Finder. I don't see my IOS device on my Mackbook Pro, or I see my MackBook Pro on my IOS device in parachuting. Tech Genius Bar said that I had to add more storage for MacBook Pro. Made with a new SSD. Still not able to use Airdrop with IOS.

  It works as expected. Drop between iOS devices and Mac requires that the Mac is a 2012 model or newer.

  (140277)

• I dropped my iPhone 4S and now the touchscreen does not work. Is there a way I can fix it without having to buy another or should I buy another?

  I dropped my iPhone 4S and now the touchscreen does not work. Is there a way I can fix it without having to buy another or should I buy another? (my screen is cracked)

  From what I see, Apple does not screen repair for any older than the iPhone iPhone 5. I don't see off-warranty, replacement cost for 4 on their page of repair, but I'm figuring you would spend at least $200 to get a new.

  Would be better to see if your cell phone operator has the options of upgrade for you.

  ~ Lyssa

• Hi, I forgot my iPod password and it says unlock in iTunes, but I don't have a computer because it is broken.

  HI, I forgot my iPod password and it says unlock in iTunes, but I don't have a computer becrise it's broken

  If it is disabled, then you will need to connect to iTunes on the computer to reset to factory settings - member friend or family who you connect to, or is it to an Apple Store nearby which you could try to go?

  Disabled device: If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

• IPod music and videos displaying not not Sandisk App

  Hi all

  Just bought a Sandisk Connect Wireless Media Drive 64 GB for my nephew for Christmas.

  Thought it would be a neat gift and was hoping to get one for me and another Member of the family.

  But I'm a little disappointed because I can't solve a problem, we're going to have. Maybe I
  misunderstood features of the product, but I could install app on the ipod touch and connect
  It firmly to the media player using wpa.

  Start the application from Sandisk and was able to connect to and veiw sample files on the media player.

  However, when the ipod is selected I can only veiw and upload pictures to the reader;
  I click on the music or video file it is empty. So my question is, should all the video files and songs of music

  who's on his ipod screen in the app files so it can download its ipod music and videos for media drive.

  Can someone please restore the confidence of my nephew with his uncle!

  Thanks in advance.

  This is a limitation of the iOS. only iOS give apps the third party access to the bread photo. If you have music or videos stored within the iOS music or video application of media player apps will not access them. You can connect the player to the computer via a USB port and copy music and video to the media player and the media player application can distribute them to an iOS device.

• Want 7640: HP Envy 7640 dropped off the grid and cannot reconnect

  Envy 7640 dropped off the grid and cannot reconnect. I followed the instructions on the previous thread without result - restoring network, cycling settings, router, modem, etc... printer indicates "failure" for the "no filtering". All other wireless devices work fine. Please notify

  Please provide the following information if anyone can help including:

  The printer model - done

  Operating system on the computer (including service pack revision) - done

  Detailed - description of problem including all devices network (extensor, switches)

  Connection method - Direct wireless, wireless, wired LAN, USB? -

  Number of brand and model of router and modem? -

  Error messages - on the screen of the printer or computer, no matter what flashing light patterns? -

  Do you think the printer is going to sleep and can't wake up? -

  If wireless, in the event of problem, what is the status of the blue wireless light on the printer, active, disabled or flashing? –

  Power off the printer and the router.  Power on the router and wait 3 minutes, power on the printer.  It connects to the router now?  What is the IP address of printers?

• After you change the raw file in CS6, jpeg looks dull and has weird tinge to it. I tried all color adjustments, but the result is the same throughout, jpegs of LR5 and 13 elements looks nice and consistent. How can I fix it?

  After you change the raw file in CS6, jpeg looks dull and has weird tinge to it. I tried all color adjustments, but the result is the same throughout, jpegs of LR5 and 13 elements looks nice and consistent. How can I fix it?

  Make sure the jpg has embedded sRGB profile.

  In what application you view jpg files?

  The symptoms you describe are typical of images with Adobe RGB or ProPhoto read in an application that does not support color management.

• Dynamic effects of HTML like Drop Down the legend and the body does not

  I use TC 2.0, soon to be upgrading to TSC 3.0.  When I try to create Drop Down Caption and Drop Down body elements in FrameMaker and Robohelp update, it does not work.

  I have the text as:

  Drop down menu test legend

  Which I note and go to the Adobe RoboHelp-> DHTML Effects-> menu Drop Down Caption and apply the style of paragraph DropDownCaption to.  I then text like:

  Test menu drop-down body

  Which I pointed out and go to the Adobe RoboHelp-> DHTML Effects-> menu Drop Down body and apply the style of paragraph DropDownBody to.

  I update my Robohelp project (related to my project of FrameMaker) and get a 'clickable' of Test Drop Down legend which I click and Interline additional just pop-up. My Test drop down of the body  text is still there, doing nothing.

  You mind, I can do this in RoboHelp directly without any problems, but then I have the problem of update of the project of FrameMaker and that it get rid of all my work of RoboHelp project. Is it possible to get this working in FrameMaker?

  Please check if there is an empty paragraph between paragraph style Drop Down the legend and the paragraph with the style of Drop Down Body in the FrameMaker document. For RoboHelp, to recognize the link between the two, Drop Down body paragraph must immediately follow the Drop Down Caption paragraph. Avoid any empty paragraph between the two.

  MILIN

• drop the class java and java source

  Hello
  
  When I ask user_objects get some java source class and java objects
  
  Select * from user_objects where object_type like '% of JAVA;
  
  How to drop these java source and java class of the database objects
  
  I tried to use the following command
  
  Drop java class /4a524d89_AutoTransliteratorPk
  
  travel AutoTransliteratorPkg java source
  
  But I get the error ORA-29501: invalid or missing Java source, class or resource name
  
  Please someone help me drop these items
  
  Thank you
  Saaz

  java originally all in capitals or was it exactly AutoTransliteratorPkg. If its exactly AutoTransliteratorPkg then try this

  drop the java source 'AutoTransliteratorPkg '.

• All the menu drop downs are empty and cannot open files or elements of the Office?

  IM under OS X Yosemite on iMac 27 ".

  It also looks like the font on the desktop icons changed.

  Is anyone know why and / or how to fix this?

  Any help much appreciated. Thank you

  Have you tried the start safe mode and login once prompted?

  You may be able to test the system once started in this way;

  See, also, if the second user accounts with the same problem.

  • Try safe mode if your Mac does not end commissioning - Apple Support

  You may find that the foregoing may help; If this isn't the case, other things to try include:

  You may be able to boot into OS X Recovery and use disk utility it

  to repair the drive (not only the permissions) if regular repair permissions

  do not work or seem to help, after a reboot in safe mode. You can

  fix permissions of the drive then in safe mode, and then restart.

  OS X Tips using the HD Recovery: (see - next - home link to learn more)

  http://pondini.org/OSX/RecoveryHD.html

  • Apple OS X and Time Machine tips:

  http://pondini.org/OSX/home.html

  If you have a proper backup, you can try to see if the problem is

  hardware or software; Sometimes a failing hard drive can make a

  problem with software stored there; corruption, etc. You can

  restore from a backup previously captured time (time Caro), but to

  Get more evidence may first be useful. Troubleshooting?

  I would look into some of the system logs to see if any evidence of show

  There are the Console utility. It is perhaps little precise, because it is so enigmatic.

  Can help a resetting of the "system management controller", in that of

  the things he is supposed to be able to do, is help if applications do not work

  correctly; the Finder (menus, etc.) is the property of OS X as an application.

  • Reset the management system (SCM) controller on your Mac - Apple Support

  For some time I saw gaps menus in the drop down.

  Years ago we could 'rebuild Office' under MacOS ancient to help solve the problems.

  The new OS X may have strange effects if there is a corruption or bad

  data; Sometimes a failing drive can produce weird effects. You can choose to

  Try a Diagnostic test; If the results are not conclusive or proof.

  • With the help of Apple Diagnostics - Apple Support

  Sorry to say that I have not exactly the thing to try and do and at about 02:00 local

  time, I'm not likely to gather a lot of Pentecost or wisdom either. Must be upward

  in a few hours. so sleep would be indicated

  Good luck & happy computing!

  Edition 2 x