I get 0009C error 48 code and cannot solve the problem?
This problem has occurred continuously for more than a year. Don't know what that means. Impossible to find similar problem is your forum.
When you get this error?
Tags: Windows
Similar Questions
-
Get error 80072745 code and cannot access the Messenger. All solutions
My question is simple... I can't access Messenger, either through my account or web access. I either get error 80072745 or I see loading forever program. I can't even to check the options or paly with parameters.
Hello
they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums
-
Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?
Hi Comintern,
· Did you do changes on the computer before the show?
· You receive an error message or error code?
Follow the suggestions below for a possible solution:
Method 1:
Step 1: Start in safe mode and check if the problem persists.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.
Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.
Let us know the results.
-
Original title: company PC Efix
Had a call from a company called PC efix and request my computer's infected badly and can solve the problem. They have a web address. Are they known to be a reputable company or organization of scam?
The fact that they called you is violating your privacy. For service companies, if you call them and ask for help, they will call you back or if request you the support from them. But if someone calls you out of blue and you say they could help you, it is likely to be a SCAM, I suggest to take a look at:
http://cyberdefend.WordPress.com/2010/05/14/Hello-i-am-from-Microsoft/
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Video decoder IdeaInterVideo codec can cause potential problemss:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Earlier, I used the Microsoft Fix it Center to turn off this problem. I don't know if it is effective or not, until I had the chance to Surf Internet and just see if the problem occurs again or not. Only time will tell. The Microsoft Fix it Center is a part of the TuneUp Utilities 2011 program.
-
Program error. I'm CS6 running on the latest version of the operating system on an iMAC. When I save my work a pop program error appears and I can't save anything. Help
Mona, I could solve the problem with a video to help adobe by Julieanne Kost. He treats of "how to reset preferences" I have reset preferences and was able to save my work. You can find it in Help/preferences in Photoshop. Good luck
-
The updates are:
Update of security for Microsoft Works 8 (KB973636)
Update of security for Microsoft Office Excel 2007 (KB973593)
Update of security for the viewer Microsoft Office Visio 2007 (KB973709)
Update of security for Microsoft Office System 2007 (KB972581)
Update of security for Microsoft Office 2007 System (KB973704)
Update of security for Microsoft Office System 2007 (KB974234)
Update for Microsoft Office Word 2007 (KB974561)
I've had this problem for a few weeks now, and I don't know if it is because of some potentially dangerous sites and also had this problem a few months back and had fixed.
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary, you can get free reports of incidents but the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
I get an error 8007007F code and updates will not install
I tried facilities, I know. I ran a check of the system, and he said that my computer was working correctly. It doesn't matter what I can not do the updates to download and install.
Hello Bruce,.
Thank you for using the Microsoft answers Forum
First of all, you will want to check and make sure that you use not any anti-virus program or firewall that will restrict or block traffic that originates from Windows Update.
Also, make sure that the Windows Update Service and all its dependent services are running as well. Do this by clicking on start and typing the word Services in the search box and then click on the result. In Services, find the Windows Update Service and make sure that it is configured to start automatically. You can also double-click the service, and to ensure that all dependent services are running as well. If they don't work at all you can start services manually and then set the properties to start every time Windows starts (automatically).
Have you tried to download updates to http://download.microsoft.com and install them individually? Otherwise, you may try this option and see if it works for you. Judd
Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think. -
I am a big fan of the Elder Scrolls and uses the new 2.2.9 STEP Setup. They went to the organizer of the Mod (MO) and I can't seem to get my FF working with the mod download things part. I click on the icon "Earth", that takes me immediately to the page file Nexus Mod, but when I choose a file to download after clicking on "Download Manager" I get this error message:
The address was not included
Firefox doesn't know how to open this address, because one of the following protocols (nxm) is not associated with any program or is not allowed in this context.
You may need to install additional software to open this address.The address when clicking "Download Manager" begins with nxm://Skyrim/mods/ the address is such because trying to download with the Manager.
Any help will be greatly appreciated! I pulled out my hair for the last few hours trying to find a solution. I disabled Adblock, other popups blockers and activated the main address in my exception rules. It simply doesn't get it. Ugh!
Thank you in advance!
In order to use nxm: / / links, Nexus Mod Manager must be installed and associated with the Protocol nxm .
Problems with this program to third parties, please see the support forum:
-
Windows updates: error 80072EFE Code. Cannot find the error code.
Anyone has any info on the error 80072EFE code. I can't get windows updates...
Successes have been reported using TDSSKiller.exe which will remove the malware, which belongs to the 'family' of Rootkit.Win32.TDSS, of your machine.
Here is the link:
http://support.Kaspersky.com/viruses/solutions?QID=208280684My previous answer to the same question:
http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/5fa45657-9cf1-45E4-BEAB-6a97e7644c55Here are a few other previous answers from other users:
http://social.technet.Microsoft.com/forums/en/itprovistaie/thread/0ce7c1e6-7EF2-48e1-B7C9-c8f1e97c71d5Here is a tutorial from Microsoft Support
http://support.Microsoft.com/kb/836941 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem. -
* Original title: wrong Region
Windows Media Player will not play CD - advise
"Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "
Note I am eager to play a CD and it is recognizing a DVD?
can anyone help
Hello
1. what version of Windows is installed on the computer?
2. what version of Windows Media Player is installed on the computer?
3. what region is your currently defined DVD player on?
4. are you able to play other DVDs?
Please follow the provided steps and update us with the results.
Note: All the steps apply to Windows 7
Method 1: Try to change the region of the DVD player and check the result. To do this, try the following steps:
a. Click Start, click computer.
b. right click on the DVD drive, and then click Properties.
c. click on the Hardware tab, click the properties button and modify the DVD of the region.Method 2: Uninstall the DVD player and check.
a. Click Start, type devmgmt.msc and press to enter.
b. develop DVD players, right click on the sub element and click on uninstall.
c. restart the computer and check the result.
Once you restart the computer, the DVD driver will be loaded automatically.
d. try to play the DVD and check the result.
You can run the troubleshooting Windows Media Player DVD Troubleshooter and check that it helps.
Open the Windows Media Player DVD Troubleshoot utility
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter
Let us know if it helps!
-
I get an error cood1197 please help me solve this problem
I get an error cood1197 please help me to solve this problem, help please.
Hello
1. when, exactly, you receive this error message?
2 do you have problems with Windows Media Player?
If you receive this error when you use Windows Media Player, refer to the methods described in the article mentioned below and check.
Windows Media Player C00D1197 error:
http://Windows.Microsoft.com/en-us/Windows7/C00D1197
I hope this helps!
-
Here is the ipconfig/all command information.
C:\Windows\System32>ipconfig/all
Windows IP configuration
Name of the host...: owner-PC
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.WirelessLAN adapter Wireless Network Connection:
The connection-specific DNS suffix. :
... Description: Intel(r) WiFi Link 5100 AGN
Physical address.... : 00-1E-65-05-FA-DC
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::e582:a22f:fef5:c1af % 11 (Preferred)
Autoconfiguration IPv4 address. . : 169.254.193.175 (Preferred)
... Subnet mask: 255.255.0.0.
... Default gateway. :
DNS servers: fec0:0:0:ffff:1 1%
FEC0:0:0:FFFF:2 1%
FEC0:0:0:FFFF:3 1%
NetBIOS over TCP/IP...: enabledLocal of EthernetAdapter network connection:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
Description...: Realtek RTL8102/8103 PCI-E FE Family NETWORK map
Physical address.... : 00-23-5A-0D-E6-2A
DHCP active...: Yes
Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 7:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: isatap. {D57EF487-9E9D-4432-A3F6-09941DBAC
B 9, 7}
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 11:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Card 6TO4
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 12:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Teredo Tunneling Pseudo-Interface
Physical address.... : 02-00-54-55-4E-01
DHCP active...: No.
Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 13:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: isatap. {82CD5F3A-4FE2 - 41 D 2 - 9313-09635 C 287
3A 1}
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes0Maybe this can help.
These steps and tell us where is the breaking point.
Check the Device Manager for the wireless card valid entry.
http://www.ezlan.NET/Win7/net_dm.jpg
If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.
Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.
http://www.ezlan.NET/Win7/net_connection_tcp.jpg
------------------
The wireless card drivers much also install utility wireless of the seller.
Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).
----------------
Make sure you firewall No. preventing / blocks wireless components to join the network.
Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.
If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .
party like Hello and NetMagic 3rd network managers can block local traffic too.
---------------------------
Stack TCP/IP work should look like.
Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.
http://www.ezlan.NET/Win7/status-NIC.jpg
Description is the data of the card making.
The physical address is MAC of the card number.
The xx must be a number between 0 and 255 (all xx even number).
YY should be between 0 and 255
ZZ should be between 0 and 255 (zz all the same number.)
The date of the lease must be valid at the present time.
* Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.
* Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.
---------------------------------------------------
A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.
Above everything is OK, you must be able to connect to the router.
Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.
If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.
Enable security wireless after you eat to make a functional connection.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
If this does not work, follow the steps below and check:
N ° 1)
Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.
(Applications > Utiliites)
Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.
Step 2)
Trash Adobe Creative cloud from Applications Eh well.
Step 3)
(1) right-click on the icon in the Finder, then select the option "Go-ToFolder .
(2) you will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)
~/Library
(3) then navigate to Application Support > Adobe.
Open file Adobe and trash folders named AAMUpdater and OOBE.
Step 4)
(1) right-click on the icon in the Finder, then select 'Go - To' folder.
(2) you will get a text box, type in the following command and then press the 'return '.
/ Library
(3) then navigate to Application Support > Adobe.
Open file Adobe and trash folders named AAMUpdater ,Adobe Application Manager and OOBE.
Step 5)
Click on the link below and download & run the cleaning of Adobe tool:
Select the option "Adobe Application Manager for Mac OS X 10.6" and click on ""clean Selected " ."
http://download.Macromedia.com/SupportTools/cleaner/Mac/AdobeCreativeCloudCleanerTool.dmg
Step 6)
(1) if it please click on the icon of the Apple menu and select System Preferences, then click Network.
(2) choose the network that is currently connected to the internet can you Ethernet or Airport (Wireless).
(3) then click on the Advanced button, then click proxies.
(4) to the title of "Select a Proxy Server to configure" uncheck all checkboxes proxy, can uncheck "Use FTP Passive Mode (PASV)".
(5) then click on the Apply Now button.Step 7)
Click on the link below and download the creative Cloud configuration file and use it to install the creative Cloud Desktop application.
https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg
-
I used Excel until last week when it wouldn't load.
Hello Vtyler,
Thanks for posting on the Microsoft answers Forum.
You will need to have the original CD of Office Student and teacher available to installation installation. If she has been pre-installed by your OEM when you purchased your computer, you will need to get the disks to reinstall. Go back to where you bought your copy and see if they will provide records. (This may likely not).
Hope that does you in the right direction.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
Maybe you are looking for
-
I need to order a heating appliance to be switched on for 60 seconds and then be off for 120 seconds, and then the operation be repeated for a number of cycles. My main loop works continuously with a delay of 50 milliseconds, and needs a Boolean sign
-
Cannot run chkdsk - Chkdsk cannot run because the volume is in use by another process.
original title: can I run chkdsk on win xp home, but when I try to use switches, I get cannot lock the current drive. Chkdsk cannot run because the volume is in use by another process. HELP PLEASE I run chkdsk without switches on win xp home. I told
-
HP Pavilion dv6 6040eo: Hp laptop battery replacement
Hey My battery for my HP laptop dosen´t work anymore and I need a new. At the back of the battery, replace the attractions. 593554 001. My question is. My battery works on 5100mAh 10.8V. My laptop still work if a 4400mAh or a 6600mAh, two 10.8 v, whe
-
Is my dx2200 mt 32-bit or 64-bit? Both, 32-bit and 64-bit software works?
-
WRV54G firmware is no longer available?
Reference supportforums.cisco.com/message/3286877 contains a link which apparently worked at some point, but no more. The only listed as available for download is the vpn client. If anyone knows where I could find what I appriciate it. Thank you.