I get a code 10 for my CD-ROM/dvd-rom.
My e: drive does not appear on my pc. I have windows Vista Home Basic. I tried the other answer to you guys, but my reg page is different. can you please help me...
Thank you
Debra
Hello
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.
Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.
Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.
Forums - a lot of expert real help
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Tags: Windows
Similar Questions
-
How to get the code produced for my Windows XP disc if I have the drive?
Acquisition of Product Code Windows XP
How to get the code produced for my Windows XP disc if I have the drive? I signed the BONE when I bought it all first, but have no way of knowing if this is the way to receive a copy of the product key.Here are some utilities, which will display your product keys:
Belarc Advisor: http://www.belarc.com/free_download.html
(He did a good job of providing a wealth of information.
However may not detect a key to office, then try one of the other two below)Also: http://www.nirsoft.net/utils/product_cd_key_viewer.html
and: http://www.magicaljellybean.com/keyfinder.shtmlPaid (free demo is available): Recover Keys: http://recover-keys.com/
"quickly scans your system for more than 3000 + software '.
and produces a list of software activation keys.13 keyfinder programs:
http://pcsupport.about.com/od/productkeysactivation/TP/topkeyfinder.htmJ W Stuart: http://www.pagestart.com
-
How can I get a code verification for Photoshop Elements 7?
I CAN'T GET A VERIFICATION CODE FOR PHOTOSHOP ELEMENTS 7
SO I CAN SEND EMAIL WITH PHOTO. SOMEONE COULD ME TELL HOW
TO GET THE VERIFICATION CODE. I TRIED REPEATABLE TO
ADOBE UNANSWERED.
CHARLES TODD
Email: [email protected]
What security code do you mean? Are you talking about to send to the Organizer? Do you mean your serial number? What, exactly?
-
During the reinstallation of Windows Vista I get error code: 80004004 for KB978601.
do reinstall Vista got the error code on article KB978601 80004004
original title: error 80004004 KB978601 code how to fix?Hello
Follow the steps and check if it works.
What exactly are you trying to do?
Step 1:: put the computer in a clean boot State before updates
Note: After installing the updates, follow step 7 in the link provided to return the computer to a Normal startupmode.
Step 2:Download and install the update manually.
http://www.Microsoft.com/download/en/details.aspx?ID=21697
If the above fails, try resetting Windows Update.
How to reset the Windows Update components?
-
Acer Aspire 2929 and a HL-DT-SL DVDRAM GSA-T40N ATA DEVICE
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
-
I just downloaded iTunes and now my = CD-ROM/DVD-ROM Drive does not work on my Compaq laptop. This is the error that he sees when I go to Device Manager. I need this problem as soon as POSSIBLE, I work on websites and I can't go without my CD burner. Anyone who can help help please. I'm panicking right now.
Thank you
Hello
Use system restore to before that you installed iTunes when the drive was working.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
======================================================If necessary:
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
get them error code 8024001 for two weeks now can't get rid of it
get error code 8024001 for two weeks now can't get rid of it, and then try again to saying
Hello
When exactly do you get the error message?
I suggest you try the steps from the following link:
Windows Update error 8024001
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-8024001b -
Pavilion a6230n: How can I get the product code (UPC) for an HP computer?
Hello, I'm selling an old HP desktop that I hang out on Amazon.
But in order for me to post on Amazon, I need to create a new list, since nobody else is for sale. To create a new list, I need a product code unique for the desktop computer. I'm looking for the Universal Product Code (UPC). A UPC code is the bar code that would be tested at the point of sale when someone buys something.
I have a few other computers, I'm trying to sell, and on the site Web of Toshiba, the first manual I opened a laptop shows me the UPC. HP manuals don't.
I tried to call customer service. And both times I'm hung up or disconnected. It's very frustrating because I have a very basic question, and does not have I gotten a response yet.
If someone can find the UPC for HP Pavilion a6230n and tell me how to get the Cup for HP products in the future, I would be very happy. Thank you!
Hello @RYoder15,
There is not much else I can suggest. I tried at length to see if I could find anything in what concerns this information without success. Maybe if you are able to find the product packed in the store? I was able to find the product on Amazon here: HP Pavilion a6230n desktop PC
I hope this helps.
Kind regards!
-
My system (Vista 32-bit SP2) tried to install update KB980248 for several weeks, but I keep getting error code 80073712. I tried to follow the directions on the site by running the system preparation tool update... did not work. Then I tried to go back to a restore point and try the update again. Yet once, didn't. I went back several restore points, but it has always failed. I don't have an installation DVD, because it came with Vista preloaded.
Help?
PaulS22401,
Walk through the steps described in this article: http://support.microsoft.com/kb/957310Let us know the results.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I get an error code 0xD59 for the update of Service Pack KB2463332? Then he wants to resart my computer for an update failed? Why?
Hello
Click on the below mentioned link to manually install the update on your computer.
Microsoft SQL Server 2005 Express Edition Service Pack 4 for Windows XP.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=184After you install the update, restart your computer and check if the problem is resolved. -
Help! I have Windows XP Edition version 2002 SP3 family. I tried to install the update of security for weeks and get the following message:
Cannot install get a security update for Windows XP (KB2476490) error Code: 0 x 80070008. It is said it is downloaded on my PC but have been unable to find it or fix it. Any help would be really appreciated.
Unable to upgrade operating system at this time... no money. Thank you!
Hello
I suggest you try the steps from the link below and check if it helps.
http://support.Microsoft.com/kb/836941
Hope this information is useful.
-
I get error Code 8007371 B. I tried several times to install and it still fails? What can I do to have it installed.
Hi CSAMaximus,
(1) how long have you been faced with this problem?
(2) what is the complete error message you receive?
Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2: Download and install the tool of the system was last updated
Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
http://support.Microsoft.com/kb/947821
Method 3: the clean boot computer and then try to install the updates.Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
-
Windows update 643 error.
http://support.Microsoft.com/kb/923100/
When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
If the information above does not resolve the problem:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
I search for updates and tell me that two important updates are available for my system but when I try to install I get error code 800b0100
http://support.Microsoft.com/kb/956702
Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100.
If the above does not resolve the problem:
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
try to install Service Pack 1 for Visual Studio 2010 and I get a Code 13EC
original title: 13EC error Code
I am installing Service Pack 1 for Visual Studio 2010 and I get a Code 13EC wrror I don't understand why I get this and how can I reslove it?
Uninstall .NET Framework 4.0 components, then try the installation again.
For further assistance, please post in the following forum:
http://social.msdn.Microsoft.com/forums/en-SG/vssetup/threads
Maybe you are looking for
-
Tecra M9: error 07 b no boot device
Hello I restarted my Tecra M9 and suddenly I get this error 0x000007B blue screen. I looked and there seems to be a problem with Windows that is could not find a bootable device. I tried to use a WinXP SP2 cd to repair the system, but it is said that
-
I have an account of tube. I have a playlist with I love watching videos. Why sign on my account with the application on the tv, but when I click on my account. My playlist, it shows I have 31 videos and when I click it, says there is no video to sho
-
Unable to shut down or restart. Dialog box shows "The Finder cannot quit because some operations are still ongoing." I'm unable to find it than those who are. Ran disk utility and tried again with the same result. Sure would appreciate your help! My
-
Hello Something seemingly simple I can't go to work... Please see the attached VI which contains a constant matrix (which represents a typical set of acquired data points) on which I perform a detection of peak/Valley.I would like to find the valley
-
Microsoft update is crushed and unusable on my computer
A recent update of the window hangs my computer and gives me the BSOD, I reformatted and reinstalled windows XP and the same thing happens, all Microsoft products, in particular of IE7, for me, is one of the recent updates is the culprit, why I know,