Why my DVD player will not see the disc of Windows 7 Installation?

Similar Questions

• DVD player will not read the discs more after burn fail

  Something strange happen to my DVD player. I tried to burn a blank DVD but it failed without any error message: the DVD has not been recognized. Since then the DVD player will not only read one of my other burned DVD that I need for my daily work. Can anyone help?

  DVD players are not particularly robust, especially designed patterns for portability. It may have burned his laser for DVD work.

• My dvd player will not read my disk of Windows 8 Pro upgrade

  Computer laptop Dell Vostro 1500 with XP Professional, my TSSTcorp L632H DVD player will not read my Windows 8 upgrade disk.

  It will read other DVDs. I've updated the firmware.

  The properties of the drive is display type as unknown file system CD player with blue disk image but used space and free space as 0.

  By using Device Manager, when I ask him to fill the volume is the disk CD 0, Type DVD, free media, not applicable Partition Style, capacity, space Unallocate status and placeholder show all 0.

  I also tried to use a separate USB TSSTcorp DVD drive and it will not also read the Windows8 disc.

  My desktop (Windows, 8, 1) DVD drive Asus computer reads the disc of Windows 8, but I can't use it to load Windows 8 on my laptop - or what I can?

  Can I connect my laptop to my desktop to upgrade laptop computer at Windows8 use of the desktop DVD player?

  I managed to copy the disc of Windows 8 on an external hard drive using another laptop that can play the DVD.

  Then I attached the external hard drive to my laptop and run Setup from there and installed Windows 8 to my old laptop to Windows XP...

  Thanks for your suggestion.

• Satellite Pro A100: CD/DVD player will not play the audio CD or video DVD

  People,
  I have a Satellite Pro A100, with a RUG * a DVD-RAM UJ - 841 S Drive.
  It will read fine data disks, but refuses to play with the audio CD or video DVD.

  I tried to uninstall & Re-Installing DVD - RAM Driver;
  That got rid of the "IO error" that I received, unfortunately I don't notice the full error: S.
  He now just doesn't see the drive. Someone at - it ideas?

  I did a full windows update, and the Toshiba Diagnostic util tell me anything useful except "Fail" :(

  I found a thread in this forum that describes a similar theme:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19747&MessageID=72404

  Sometimes this error is displayed because the player does not support the environment.
  Always it is every way is supported by readers and I think that in the user manual, you will find an index CDs or DVDs compatible

  Maybe the drive is defective and can not calibrate lens in the right position.
  But this laptop is not very old, and I can't imagine that the drive is defective
  However, nothing is impossible.

  What you can do is to carefully clean the lens and see that it will help.

• Equim M40x: DVD player will not change the region even with 1 change remaining

  I have a Toshiba Equim M40x with a carpet * a DVD - Ram drive 830 s. My children recently tried to play a region 2 dvd and it failed with the message the DVD player is set in a different region.

  When I went into Device Manager to change the region (it was set to 1), it showed that I had a chance to change.
  However, when I tried to change it, I received an error message: "unable to update region setting. Please make sure the drive contains a region 2 media and you have the privilege of the administration. »

  I tried to put a region 2 dvd in the drive and I have the privilege of the administration and it still does not work.
  I then went looking for firmware free region for this disc, and of course, it does not exist.

  Help!

  Hello

  It of not possible to unlock the DVD player on a legal way.
  Of course, I found many sites that suggest that it of possible to unlock the firmware flash drive.
  But believe me; It is not desirable and very risky!
  You may damage the disc and then you can not read or burn CD or DVD media!

  I assume that you have already changed the region 5 times code. In such cases, it s already locked.

• Qosmio G30-163: HD-DVD player will not recognize the Matrix Trilogy

  It is the last issue. WinDVD HD crashes after playing the opening for Blood Diamond and The Island WB logo. I posted a message about it, but it disappeared.

  Anyone know when the last update is due? He has not been one since December 26.

  Thks

  This post initially you're talking about? :
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=95884#95884

  I have checked the European driver of Toshiba page and chose the Qosmio G30 PGQ31E series and found the update to the most recent Firmware for HD DVD-R + r DL DRIVE (SD-L902A) and for the readers of disc-DVD-HD TS - L802A.
  There are two different firmware updates.

  In addition, I would recommend looking for an update of the HD DVD player. It of necessary.

  Toshiab HD DVD player update was published on the Toshiab driver page. Update!

• Equium A100-027: CD/DVD player will not read the CD data/music

  He'll read/play commercial DVDs, but music no commercial and data CD...

  I tried a new cd of norton, but do not read this and have tried other commercial programs but no luck... just click

  the same thing with music, tried I don't know how many discs, same result... help me please!

  Have you ever tried this method?

  Go to Device Manager and remove the drive from the list of devices CD/DVD.

  Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart your laptop, and after that windows installs it again. Perhaps this may solve your problem.

• DVD player continues to 'see' the disc that was removed

  I downloaded a free video player to play a dvd of an old movie family (Windows Media doesn't play) and when you're done, I removed the dvd from the drive.  I have two disk drives, both will play cd or dvd and it will burn.  I loaded a different dvd to access the old pictures and everytime I try to access, the computer shows that the files of the old family movie DVD is in the drive.  That is, the player no longer recognizes the new dvd and continues instead to 'think' the older video is in the drive.  I uninstalled the video player software.  I have cd of music will play in the drive, but the different dvd does not get recognized.  Y at - it a fix for this conflict?

  Moved from feedback

  Original title: DVD player

  Hi Dick,

  1. What is the operating system installed on your computer?

  2. What is the file format?

  3. the disc works on another computer?

  4 have had any changes made to the computer before the show?

  Please follow the steps from the link and check that it works very well.

  See the link.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116/en-us

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Apple dvd player will not eject a disc, does not show in the devices

  I'm on El Capitan, the player has played other discs, this disc does not appear

  There is no manual of the dvd drive eject

  drive does not appear in the devices

  Get help with the SuperDrive slot on your Mac - Apple Support loading

  How the disk by force ejecting

  Mac Mini

  How to eject a defective DVD?

• CD\DVD player does not display the contents of the data DVD.

  CD\DVD player does not display the contents of the data DVD, but will display the content of the data CD.  What is happening on more than one PC, and it began when Active Directory GPOS have been applied for the PC.  If untying policies the problem persists.  What happens on DVD ROM and DVD RAM drives.  Scanning software has been added to these machines, think it might be an ASPI crush.  All these machines are XP SP3 running McAfee.  When you insert a DVD with data on this topic, the name of the drive in windows password DVD RAM drive to CD drive, and if you try and browse the DVD it displays as a blank CD.  I changed something on the PC with the policy but cannot understand what he.  Other identical PC can view the contents of the DVD very well, but they never had the same strategies.  Any ideas, thank you.

  Hi PDoneen,

  The restore of the system; restore the computer to the before date when policies have been launched on one of the affected computer.

  You can check the link for the steps below: how to restore Windows XP to a previous state:http://support.microsoft.com/kb/306084

  Post back with the results.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a pavilion p6130fpc and it will not see the drives.

  I have a pavilion p6130fpc that will not see the drives. I tried 3 different hard drives and change the cable and port twice. I have also reset the BIOS and pressed the power button for five seconds after you disconnect without success. Someone at - it any other ideas?

  Willman,

  Unfortunately you are not alone. HP has sold a lot of different models with the M2N78 - motherboard. The problem is that the manufacturer of the Board of Directors (not HP) set up a controller chip NVidia which tended to overheat. Once this chip goes, ur stuck. The SATA ports are controlled by this chip.

  http://h30434.www3.HP.com/T5/desktop-hardware/m8530f-desktop-PC-with-a-M2N78-la-mother-board-doesn-t-see-my/TD-p/181716

• I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

  Original title: no dvd

  I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

  Hi Lesliestones,

  ·         Did you do any change on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest refer you to the article in the Microsoft Knowledge Base and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Method 2: You can run the fixit and check if it works.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  I hope this helps.

• WM 11 will not see the video of the WMV files but will MPG

  WM 11 will not see the video of the WMV files but will be mi/gal.  He plays the sound but not the image. No error displayed either, just this psychedelic carp.

  Hi Tammii,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  Method 1

  This can happen due to the acceleration of video material for the game in the drive try reduce (or cut) great video acceleration by following these steps.

  (a) open settings display by clicking the Start button, clicking Control Panel, appearance and personalization, customization, and then clicking display settings.

  (b) click on Advanced settings, click the Troubleshooting tab, and then click change settings.

  (c) note that some video card drivers do not allow allows you to change the settings.

  (d) move the hardware acceleration slider to zero to reduce or turn off video hardware acceleration.

  Method 2

  This may also occur due to the missing codec required to run the video file.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Method 3

  If the previous step fails then try to update the drivers of graphics card on the computer by visiting the graphics card manufacturer's website, download and install the latest driver and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• update of the player will not accept new password to install - no installation to change?

  update of the player will not accept new password to install - no installation to change?

  Thank you all sorted! my mistake

• I am trying to download Adobe Acrobat 8 Professional, because the disk drive on my computer will not read the disc. I can't link to this download.

  I am trying to download Adobe Acrobat 8 Professional on my PC, because the disk drive on my computer will not read the disc. How can I associate with this download?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".