I get error DRIVER_IRQL_NOT_LESS_OR_EQUAL
original title: I had a problem with my WINDOW XP Home edition system
DRIVER_IRQL_NOT_LESS_OR_EQUAL
STOP: 0X000000D1 (0XF7BCA000, 0X00000002, 0X00000000, 0XF7487744)
gsjsadv.sys - address F7487744 base at F7483000, DateStamp 4d71d52a
After the reboot you receive the following message:
system has recovered from a serious error:
BCCode: d1 BCP1: F7BCA000 BCP2: 00000002 BCP3: 00000000 BCP4: F7487744 OSVer: 5_1_2600 SP: 2_0
Assistant: 768_1
Stop Code 0x000000D1 means:
The system attempted to access pageable memory using a kernel IRQL level too high. The most typical cause is a bad device driver (the one that uses an incorrect address). It can also be caused by caused by faulty RAM or do not match, or a swap file is damaged.
Whereas the file named in the error message, gsjsadv.sys, turned up without the success of Google, it seems to me that your problem is more likely to be badly coded malware as bad RAM.
You have a recent version of an antivirus with a current subscription application?
Have you scanned for malware using Malwarebytes Anti-Malware or SUPERAntiSpyware?
Tags: Windows
Similar Questions
-
Original title: computer stops with error DRIVER_IRQL_NOT_LESS_OR_EQUAL.
computer stops with error DRIVER_IRQL_NOT_LESS_OR_EQUAL STOP: 0x00000001 (0x00000002, 0x00000000, 0x0000000C, 0xf391ca38) Portols.sys address F391CA38 base at F391CA38
Do you mean Portcls.sys that?
The link to the technical support engineer's not even a good guess and an another wild goose chase.
Which has to do with the audio or audio driver on your system of brand not specified and the model. We should get some details about your system and then see if we can find the right audio drivers for your system.
Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system. Not knowing the basic information a problem prolongs the frustration and the agony of these issues.
Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.
Provide information on your system, the better you can:
What is your system brand and model?
What is your Version of XP and the Service Pack?
Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..
Now provide some gory details more:
Click Start, run and enter in the box:
Msinfo32
Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.
For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.
For information about the audio drivers, expand components, click Sound Device, click on edit, select all, copy and then paste the information here.
There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.
This will minimize back Q & A and eliminate guesswork.
-
Repeated error DRIVER_IRQL_NOT_LESS_OR_EQUAL blue screen
I replaced the motherboard and reinstalled Windows 7 HP. I get repeated DRIVER_IRQL_NOT_LESS_OR_EQUAL blue screen errors. Can anyone help identify the problem. I have the available minidump and the available XML files.
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 2057More information about the problem:
BCCode: 19
BCP1: 0000000000000003
BCP2: FFFFFA80069C5560
BCP3: 0000000000000000
BCP4: FFFFFFFFFFFFFFFF
OS version: 6_1_7601
Service Pack: 1_0
Product: 768_1Files helping to describe the problem:
C:\Windows\Minidump\100112-18439-01.dmp
C:\Users\Michael\AppData\Local\Temp\WER-28048-0.SysData.XMLThanks for your useful notes. In this case, a MEMORY_MANAGEMENT error appeared before that I could answer. The fault was found on the motherboard. Replacing, it solved the problem. Thanks again.
-
Windows 8 error driver_irql_not_less_or_equal
I've recently updated to Windows 8 windows 7 Ultimate edition. The operating system works perfectly well. For some reason any all the sudden today whenever I load a game like planet side 2 or Minecraft I get this error driver_irql_not_less_or_equal? How can I avoid this? My graphics card is up to date and he just started to happen randomly. I have day avast today. Would be the cause?
Hi robeo1081,
The minidump files showed DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) of errors in reference to the stop netio.sys.
The process that hangs in a large number of accidents is the AvastSvc.exe.
Your question is similar to what has been reported in the following thread;
I suggest to uninstall Avast and see if accidents solve.
Consider the alternative security software or simply use firewall and antivirus integrated Windows.
-
When I connect broadband connection. a blue screen appears with error driver_irql_not_less_or_equ
. DMP files ar bellow:
https://onedrive.live.com/?CID=BF931C2E054B2BA5&ID=BF931C2E054B2BA5%21105
Original title: driver_irql_not_less_or_equal
Accidents were not conclusive.
BugCheck D1, {29, 2, 0, fffff880018b9f2a}
Probably caused by: ndis.sys (ndis! ndisXlateReturnNetBufferListToPacket + 2 a).
Follow-up: MachineOwner
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access an address pageable (or completely invalid) to a
application interrupt level (IRQL) that is too high. It is usually
caused by drivers using a wrong address.
If the kernel debugger is available, get a stack backtrace.
Arguments:
Arg1: 0000000000000029, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff880018b9f2a, address memoryDebugging information:
Update your network drivers, preferably from the support page of the manufacturer of your computer, which is strangely not available at this time. If you can't find a version update at Dell, try Realtek, linked below
Identification information of the machine [of Smbios 2.3, DMIVersion 35, size = 2590]
BiosVendor = Dell Inc.
BiosVersion = A11
BiosReleaseDate = 30/11/2006
SystemManufacturer = Dell Inc.
SystemProductName = OptiPlex GX520
BaseBoardManufacturer = Dell Inc.
BaseBoardProduct =
BaseBoardVersion =OptiPlex GX520
http://www.Dell.com/support/home/us/en/04/product-support/product/OptiPlex-GX520/drivers
Note: This machine is pretty old and I see no driver support beyond Windows XP.
Image path: \SystemRoot\system32\DRIVERS\Rtnic64.sys
Image name: Rtnic64.sys
Timestamp: Fri 30 mai 11:12: 23 2008 (48401957)Description of the driver: Realtek Ethernet NIC driver
Driver update site: http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=7&PFID=10&level=3&Conn=2
-
Original title: windows error.
I have windows 8, but the last 3 days, while I was working, I get this error:
DRIVER_IRQL_NOT_LESS_OR_EQUAL (athw8x.sys).My laptop crushes down when this error is displayed.
What can I do?Thank you
XV
These were related to athw8x. sys. Driver Description: Atheros Wireless LAN Driver. Driver update Site: http://www.atheros.cz/. Yours is 2 years and more. I'd install the most recent driver available.
Symbol of validation of the path summary *.
Location of response time (ms)
Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9200 MP (4 procs) free x 64
Product: WinNt, suite: TerminalServer personal TerminalServer
By: 9200.16628.amd64fre.win8_gdr.130531 - 1504
Computer name:
Core = 0xfffff802 '1f619000 PsLoadedModuleList = 0xfffff802' 1f8e5a20
The debugging session: 06:25:20.330 Sun may 4, 2014 (UTC - 04:00)
System Uptime: 0 days 1:01:26.034
Loading the kernel symbols
...............................................................
................................................................
...................................................
Loading user symbols
Loading unloaded module list
.............
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************Use! analyze - v to obtain detailed debugging information.
BugCheck D1, {28, 2, 0, fffff88005da743c}
WARNING: Unable to verify timestamp for athw8x.sys
ERROR: Module load completed but symbols can be loaded for athw8x.sys
Probably caused by: athw8x.sys (athw8x + 10d43c)Follow-up: MachineOwner
--------- -
March 30, im getting this error on windows start.
When I start my notebook ' VAIO' logo comes with "Preparation auto repair. After 2-4 seconds 'circular loop treatment' pause for 1 sec & 'Blue screen' comes with
"Restart your PC on a problem and needs. We are only collecting the error information, and then we'll restart for you"
error "DRIVER_IRQL_NOT_LESS_OR_EQUAL (iaStorA.sys).
I know its technology Intel Rapid Storage Technology.
I had my backup of the C: & D: via Ubuntu live disk installed on USB key on a Portable HARD drive.
now, I just need to get into recovery mode.
When I press on "Assist-> recovery & hold ' and then it goes blue screen.
(1) im thinking to 'Safe Mode' start up. because if it will allow the startup I can uninstall the drivers of Intel rapid storage Tech.
Please tell how I can do it, because I can browse the live Windows by Ubuntu Pendrive files.
(2) 2nd is I can also navigate my "recovery Partition", so could you tell me how to use this 'partition data' to something to copy paste for USB...
My Recovery Partition to a folder 'sources' & also sources---> install.wim (9.05 GB)
folder 'sources' is total 17.9 GB in size.
If you (microsoft) can help me with the idea of 1st activation mode without fail to start, then it would be very very useful. Please, I beg you.
just need to as the bypass to my window troubleshooting-made & then I can start my recovery.
thnx.
Hi Christophe,
As the report makes clear that the Intel rapid driver is the root cause of the
question, we can try to run restore the system to an earlier point to cancel the update of starting on the recovery Partition.You can see the Sony guide learn more about the problems of system recovery:
http://community.Sony.com/T5/Windows-8/Windows-8-upgrade-Troubleshooting-FAQ/TD-p/41893
To go in safe mode since the Partition configured recovery on your computer, you can
Follow the instructions below.Once you are on the recovery Partition, you will be asked to press any key to load sound
content, to do. First, you will need to select your keyboard type. Press the page layout you want to use. If you want to browse the available options, press 'see more keyboard
layouts' until you find the one you want to use.Windows asks you to choose an option. Press help.
In solving problems screen, tap Advanced.
In the Advanced options screen, tap Start parameters.
You are informed that you are about to restart to change several options of Windows, including activation of the Secure Mode. Press restart.
Your computer or your device restarts again and displays nine startup settings, including Safe Mode, Safe Mode with network and Safe Mode with command prompt
Press F4 on your keyboard, to turn on Safe Mode, F5 to activate Safe Mode with network and F6 activate Safe Mode with command prompt. Windows 8 and Windows boot 8.1 now depending on the setting you have selected.
It will be useful. Please let us know in case you need more information on issues related to Windows.
-
Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think. I need help to remove the update one put it back.
CBTEKRONY wrote:
Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think. I need help to remove the update one put it back.
What is this error message that you receive? This would help a lot. From there, a person must be able to provide some additional troubleshooting steps.
-
I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?
Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.
-
I have windows XP - Pro and recently upgraded to Firefox 7.0.1 and OE I get errors from web sites on cookie settings. I can't access the cookie settings via the tab tools option and privacy, because there is no option of cookie except to erase or delete individual cookies. I could manage my cookies before but something has changed in this version of Firefox, and now it's playing a lot of features of my web site.
See all the parameters of the story and the cookie to use:
- Tools > Options > privacy > Firefox will be: "use the custom settings for history".
-
Hi, I just bought a used 2012 Pro 13 "Macbook. It came with iMovie installed. However, I would like to get the update to iMovie. He said: I can't update iMovie because a different Apple ID was used to download iMovie and I get errors. How can I update iMovie?
Error message #1: these applications cannot be accepted by your Apple ID. These applications have already been assigned to another Apple ID, and they will be available in this list of purchases Apple ID. If you don't have access to this Apple ID and would like to receive future updates, you will need to purchase applications.
Error message #2: update are not available with this Apple ID. This update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled.
Error message #3: we could not complete your request. There was an error in the App Store. Please try again later. (null)
Unfortunately, free updates are available to the original purchaser of the computer. The iMovie is locked to his Apple ID, so unless you have to grab his ID, you can buy iMovie.
-
I get error # 4005 when I try to reset my iphone via itunes 6.
I get error # 4005 when I try to reset my iphone via itunes 6. The iphone is frozen with the screen showing that it wants to connect to itunes. I made sure my itunes and software mac was up to date, tried to restart my computer and tried different usb ports and I always get the error code 4005 every time. I am also using the same cable of load supplied with the phone.
Are there more options for me to unlock my phone?
If you have tried all the steps mentioned in this article and you are still not able to restore the phone, contact Apple for repair.
If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or
-
Pair of M30 - 604 with installing identical software - Modem gets Error 633
Hello
I have a pair of Satellite M30 604 s running Microsoft Windows XP SP2, the same Office 2003 Enterprise, Norton SystemWorks 2005 software. All was well at least the last 6 months.
I recently installed Norton GoBack part of SystemWorks, this may or may not be connected to the problem, it's just the latest thing that has been installed.
A single machine whenever you try to connect through software Modem on COM3 TOSHIBA gets Error 633.
Have studied the problem even backed up a machine and restored that to the defective one, still no error.
Any ideas, or I might have to strip the thing down by using the recovery disks, is not prepared, in view of the time it will take to get back to where he is - without this annoying fault.
Seems to be the hardware failure or conflict as now make a full recovery.
[Edited by: admin on 16 July 05 08:54]
-
Get error Code 12 as he tried to use the ExpressCard 8360 VXI card
Dell XPS M1530 laptop computer using, under Win XP SP3. Everything went very well with the same material in September 08. Now, I am getting error Code 12, "this device cannot find enough free resources that can be used. (Code 12) ». I tried disabling other devices in my laptop as the large map broadband and media without change in the symptom slot. Is there a better way to understand what is happening and to restore my computer to work with the MXIExpress card?
-
I tried to solve the problems to the existing solution in this forum. I still get error 50405
Dear,
I use USB-6009 for controlling pumps, valves, and two Mass Flow Control. Each two cycle I get error 50405. I tried to solve the problems in the existing solution in this forum, but the error always showing each cycle 2 of the operation. I enclose my VI filled for the expertise, I was wondering if its design issue? Home shot of the error screen. Thank you.
You have certainly a few design issues.
The structure of stacked sequence tends to create more problems than it solves. I the have not used in new programs since version 1.2 of LabVIEW (in 1989). A state machine is a much better choice of architecture.
Local variables can cause race conditions, copies of additional data, poor performance and it is difficult to debug code. There are special cases when they should be used, but these conditions are not in your code. Just wire directly on the terminals of control at the scene, the data will be used.
My guess on the likely cause of your error is the use of several DAQ Assistant to perform the same task (with different data values) in each image in the sequence structure. With the arcitecture state machine that I suggested above, you would need one. The DAQ Assistant trying to be clever on the configuration and tasks of closing, but different instances do not speak with each other, so they don't know when to release the resources. You might be able to do work if you used the DAQmx screw standard you have done with the task of digital output. You do not connect the error lines of the DAQ Assistant for you can be missing errors.
Indicators and controls without legend may be a troubleshooting nightmare. Please give each control and seeing a unique label. If you don't want the visible label on the front, you can use the properties of the control to hide. If you want multiple controls to have the same visible text for the operator, use the legend.
Learn how to use subVIs. Most of the code in the 6 images of the structure of internal sequence is identical. By converting only a Subvi, you would reduce considerably the size of the diagram and if you ever need to modify the code, it should only be changed in one place - the Subvi.
The while loop in frame 0 of structure of outer sequence is a "gourmet" loop He's going to run as fast as possible and seize all available CPU resources until the user presses a button. Put a wait function (ms) in the loop with expectation of ~ 100 ms. best, learn how to use the Structure of the event for user input.
The second loop inside of the structure cases inside does nothing and can be removed.
Many of these objects suggest that you have a programming background using the text-based programming language. LabVIEW uses a paradigm of data flow that avoids largely for things such as the structure of the sequence and the local variables. I recommend that you work through the tutorials online on the Getting Started with LabVIEW.
Lynn
Maybe you are looking for
-
Bookmarks are not displayed in the sidebar
Bookmarks appear more in a sidebar in the browser. When this has happened in the past I have manged to view by pressing CTRL + SHIFT + B but its does not display these this time I uninstalled and reinstalled Firefox (closing my laptop after uninstall
-
Yoga, 13 screens darkens when unplugged
I had only my Yoga for a few days and love it. I noticed that when I unplug it the screen darkens. I have normal, predictable courthouse or a sign of a problem? Thank you
-
Ntoskrnl.exe SBS Server 2008 problem
Windows Server SBS2008 indicating the error when booting Windows could not start. A recent hardware or software change might be the cause. To solve the problem 1. Insert your Windows installation disc, and then restart your computer 2. choose your la
-
I have a psc 1350 HP which cannot me use the scanner, due to incompatibility with Internet Explorer 8. When I use their "fix", it turns out that my screen blue and green. Aid others?
-
HP LaserJet P3015dn: Cannot print in Arabic
I'm unable to print Arabic on the IBM AIX printer. Any suggestion please?