I get no sound through my DN1030 STR watching netflix via a chip/wi-fi tv

I get no sound through my DN1030 STR watching netflix via a chip/wi-fi tv. I have fron Panasonic Plasma tv HDMI cable receiver. Do I need an optical cable receiver TV since I get netflix through my wi - fi tv?

Thank you

Well I just plugged an optical cable from the tv receiver and it worked! IM always open to suggestions if anyone has a better solution, but for now it seems to work.

Thank you!

Tags: Sony Products

Similar Questions

  • get my sound through my TV

    Hello
    Im trying to get a sound threw my tv from my pc by plugging an audio cable to the back of the computer to the red and white at the back of my TV and ive tried turn to play with the settings on my TV and computer and still carnt get out anithin? Ive downloaded realtekhd audio manager try and configure the right player but always crnt seem to get Workin'?

    Hi TomSlone,

    Make sure that the cables are firmly connected and try the following steps.
    a. Click Start, click Control Panel
    b. click sounds. Select the playback tab.
    c. click on icon\RGB TV, then check the button set as default.

    You can also read the following article and see if it helps.

    Connect your computer to a TV

    Hope this information is useful.

  • Get the 8008 error when trying to watch Netflix and you are prompted to install Silverlight

    Hey everybody,

    Whenever I try to watch netflix error n8008 arises, which is related to silverlight. It is not a specific problem of the browser, I uninstalled silverlight and now whenever I try to watch a video I am prompted to install silverlight again and always, the installation fails. Any help would be greatly appreciated.

    Thank you!

    Hello

    1 did you changes to the computer before the show?

    2. When was the last time it worked?

    3. what version of IE are you using?

    I suggest you follow these methods and check.

    Method 1: Run the Silverlight uninstall program to remove settings from registry of Windows Installer and then reinstall Silverlight.

    To do this, please visit this link:

    How to clean a facility damaged Silverlight and then reinstall Silverlight?

    http://support.Microsoft.com/kb/2608523

    Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

    See if that helps you to uninstall Silverlight on the computer. If you have managed to uninstall Silverlight, see the Web page below, and download the latest version, play Netflix and check if you receive the error message.
    http://Silverlight.net/GetStarted

    Method 2: Check the suggestions from the link next and if they help.

    http://support.Netflix.com/en/node/69

    I hope this helps!

  • try to get sound through my TV

    I have connected my pc to my tv with an hdmi cable and have implemented multiple displays (which shows very well) but I get no sound through my TV? I know it should work as I had sound that goes through when I tried first. Unfortunately I do not know what I'm doing differently. Thank you!!

    Hello

    Cables HDMI support audio signals, but not all compatible HDMI video audio support cards. If your HDMI compatible video card is compatible audio, you may also need to set the audio device HDMI as audio device by default. To check if sound is supported via HDMI, follow these steps:

    (a) click the Start button and then click Control Panel. In the search box, type sound, and then click sound.

    (b) click on the Read tab, and then look for a HDMI device. This appears as a "speaker" icon and is labeled as speaker, followed by the name of the device.

    (c) If you have a HDMI device, click the device, click on set as default and then click OK.

    Change the audio device may require that restart you your computer.

    See also: why don't I hear audio when I connect my computer to a HDTV?

    Diana

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How do I get sound through my iMac with a USB turntable?

    How do I get sound through my iMac with a USB turntable?

    You need something like this:

    https://griffintechnology.com/us/iMic

  • His record game, I can get sound through headphones

    I can't get sound through headphones and not on the computer

    First of all, what PC model do you use?

    Desktop or laptop computer?
    You can try to check what audio output device is set as default
    To do this, right-click on the Volume icon control near the clock
    Choose playback devices in the list
    If there is a speakerphone option, select it and click on set as default.
    It would also be possible that you need updated for your sound card drivers.
    or if it's a desktop PC. It cannot have a built-in speaker. Thus, headphones or external speakers might be your only option.
  • How can I get the sound card to play on the speakers of the car?

    How can I get the sound card to play on the speakers of the car?

    Usually connecting the phone to the car system - particularly at the point where you can play the music usually connects the Maps app

    There is a switch at the bottom of the maps app with a speaker symbol that allows you to toggle between having the sound coming through the phone or Bluetooth

  • Satellite A200 - how to get the sound on the TV?

    Hello

    Im trying to set up my laptop through the TV so I can watch videos via my TV, I have the part well display using an S-video cable but I do not know how to switch the sound of the TV/Surround Sound System.

    Someone can give me a guide or helps to do this?

    Thank you

    Merrry Christmas and happy new year

    Very interesting thread about a similar problem that you find under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=69026

    Check what Miro wrote and what he uses to get the transfer of audio and video signals to external devices.
    If you still have any questions please let us know.

  • PC dv7 Beats Audio. No sound through speakers. Headset plays sounds

    I tried to uninstall and reinstall the software IDT, worked with the helmet on the internet basic sounds.  Tried to set up the sound, but he will say that he was unable to play the sound, but gives the alert ping with the window to appear.  When I go to iTunes and try to play a song or a movie, when I hit the play button it doesn't do anything (it is not still progress in the song as if the speakers were not on). When I click on the audio icon on the toolbar, it separates now between headset and loudspeaker sounds.  I bought the computer it last June, so it is a few months old and I only play many sound through it if it does not make sense.  Is there anything else I can do to fix this?

    HP Pavilion dv7t - 6 c 00

    Windows 7

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp58001-58500/sp58226.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

    Kind regards

    DP - K

  • No sound through the speakers

    I have a HP Pavillion DV6 earlier and today a window Insyde Flash skipped upward, I didn't know what it was and did not trust in it so I closed it, seconds later a CMD window opened and closed then the sound on the video, I watched her leave stutering and stopped while I went on another video and it's the same thing and there was no sound on spotify so I rebooted. When I turned my laptop it was normal, I'm so back spotify and noticed a message at the top that says: 'there is a problem with your sound card. Spotify is unable to play music. "and still no other windows will produce sounds, I realized then that I can get sound on things like youtube or games through my headphones, except spotify plays no music and always produces the same message, I'm doing an analysis of the system and updated 11 things waiting for me , which none seems to have been of Insyde. I'm really stuck with it and hoping that someone here will help me.

    Hello:

    Please, try the following...

    First do a hard reset of the laptop and if the audio does not return thereafter, then try reinstalling the audio driver.

    Hard reset instructions on the link below.

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=...

    If you are still without audio, go into the BIOS and set the defaults, save and exit.

    Paul

  • Pavilion dv6: new headphones, but some emissions are transmitting sound through speakers and headphones.

    Spoiler (Highlight to read)
    Hello
    Hello

    I recently bought a new headphones for the game but had some problems with it and the sound system. A major problem is when I have someone call on Skype, the Skype sound or the call will go through the headphones, but on the other audio from the speakers. I also agree that also what iTunes does not work when I am in a call as well. Some examples would be that if I want to watch a YouTube video during a call, noise would come by the speakers and not the headphones. However, I found a solution for this. All I had to do was turn off the main speakers and the audio was transmitted to the headphones. Another example would be that if I want to run the games through Steam (Garry Mod, TF2, ect.), I get no sound in the game. Not through my speakers or headphones. With one exception, volume of Garry Mod, I can hear through the speakers so that in a Skype call, but I want the sound to come through the headphones. But with TF2, I have no sound whatsoever. If you need more information about me, feel free to ask. Thank you.

    Hello @LayneStaley,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I read your post on how some programs make sounds through the speakers not the headphones and I'd be happy to help you in this case!

    To make sure that your headphones are used when it is connected to your laptop, I advise you to follow the steps below:

    1. click on the Start button

    2. click on Control Panel

    3. click hardware and sound (the icons of sort by 'category' Control Panel) and then click on its

    4. under reading, you should see one or two speaker icons. One of them should have a green check mark next to it (which is the main speakers to your laptop). If the second speaker icon is not visible, right-click in the list of devices and select Show disabled devices

    5. a second disabled icon "speakers" should appear. Right click on this icon, then click Activate

    6. Select the device speaker newly enabled, right click and select "set as default device".

    7. click on apply.

    Please re-post with the results of your troubleshooting, and I look forward to your response!

    Concerning

  • You Tube, after that 11 seconds the video stops, in all and is no sound through the speakers. No noise in the music of cd too

    For example: in You Tube, after 11 seconds the video stops, in all and is no sound through the speakers. No noise in the music of cd too.

    If you get no audio cd, youtube or anything else, you must first check in the volume control that you are using the sound card, you are connected, that nothing is on mute and volume is sufficient, or install the drivers for your sound card.

    Video YouTube can be that your internet connection is slow or too much peoole try to watch the same video, save it to your hard drive and then watch or, give him a minute or two to download in the buffer before you start watching.

  • HP ENVY Phoenix 810-160: I can't get the sound to work

    I just got the

    HP ENVY Phoenix 810-160 and I can not for the life of me get the sound to work.  I use it with a HP Envy 23 inch monitor which also has audio Beats and a HDMI cable connection.  I went through all the steps on the support page of the monitor and desktop support page.  Any help out there?  Thanks in advance.

    Hello

    No, it's going to work, you can not connect computer Office AiO 23 and get a sound of the AiO 23.

    Kind regards.

  • RECEIVES SOUND THROUGH LG 42 INCH TV WITHOUT PC SPEAKERS IS CONNECTED.

    I hooked my home edition of windows vista to my lg 42 inch tv. Also, my husband is gone & had a connection, allowing the sound to play through the TV speakers. It also disconnected pc to use on another pc, speakers & now will not play sound through tv? What can I do to make the TV speakers work?

    Hello katturby,

    ·         How you have connected the TV to your laptop?

    ·         Your laptop has an HDMI output on your computer?

    The laptop can carry video and sound via a cable only if the laptop has HDMI output. If you do not have a HDMI/DVI connector on the back of your computer, then you need to use the connectors VGA composite or s-video to view the output of your PC to an external monitor as an LCD TV.

    If you have an exit without HDMI on your laptop, then you will need get the audio output using the audio of your laptop Jack, as you have connected the speakers.

    If you have connected your laptop using an HDMI cable, check if the HDMI output is active from playback devices.

    1. click on start, type Sound in the box to start the search.

    2. click on sound in the results of search at the top of the start menu.

    3. click on the Read tab.

    4. on the tab 'Read' it has listed the sound options at your disposal. It should read "peripheral digital output (HDMI)" click on it.

    5. it should now check this option box.

    6. the sound should play through your HDMI connections to the TV.

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

  • Sound through DisplayPort on HP EliteBook 8440p

    Hello

    I have a HP EliteBook 8440p and with my adapter DisplayPort-HDMI I have connected the PC to my TV. HDMI and adapter cable is ready for both sound and picture, but Im receives no sound from my 8440p with this configuration.

    Does anyone have an idea? Maybe the 8440p does not support sound through DisplayPort? Not been able to discover this...

    Hope someone can help me :-)

    The solution is to install the drivers Intel(r) Audio display. If you need it email me and I will send them to you.

    steps to install:

    1. click on the flag high definition Audio Device

    2. turn to update driver

    3. I would like to choose which Driver to instal

    4. do you drive

    5. go to downloaded the location of the file and install

    6. without reboot needed.

    [email protected]

Maybe you are looking for