RECEIVES SOUND THROUGH LG 42 INCH TV WITHOUT PC SPEAKERS IS CONNECTED.

Similar Questions

• Sound through DisplayPort on HP EliteBook 8440p

  Hello

  I have a HP EliteBook 8440p and with my adapter DisplayPort-HDMI I have connected the PC to my TV. HDMI and adapter cable is ready for both sound and picture, but Im receives no sound from my 8440p with this configuration.

  Does anyone have an idea? Maybe the 8440p does not support sound through DisplayPort? Not been able to discover this...

  Hope someone can help me :-)

  The solution is to install the drivers Intel(r) Audio display. If you need it email me and I will send them to you.

  steps to install:

  1. click on the flag high definition Audio Device

  2. turn to update driver

  3. I would like to choose which Driver to instal

  4. do you drive

  5. go to downloaded the location of the file and install

  6. without reboot needed.

  [email protected]

• I get no sound through my DN1030 STR watching netflix via a chip/wi-fi tv

  I get no sound through my DN1030 STR watching netflix via a chip/wi-fi tv. I have fron Panasonic Plasma tv HDMI cable receiver. Do I need an optical cable receiver TV since I get netflix through my wi - fi tv?

  Thank you

  Well I just plugged an optical cable from the tv receiver and it worked! IM always open to suggestions if anyone has a better solution, but for now it seems to work.

  Thank you!

• Re: Satellite C660: Sound through the speakers when the headset is connected.

  I have a brand new 258 C660, running on Windows 7.
  Playback device: Realtek High Definition Audio

  * Whenever I have headphones or external speakers connected via the 3.5 mm jack plug, sound still comes through the built-in distant.*

  Here's what's happened so far:

  When I plugged the external speakers were first, I was asked to choose if I had plugged a headphone or speakers. I selected "speakers" and then also, perhaps foolishly, choose "do not ask me again".
  Now, I can't to this selection again.

  Here's what I've tried so far:
  -Reboot
  -Try different headphones, try them on other devices
  -System Restore (not, for some reason any)
  -all settings via the sound control panel

  Basically, I think that I am looking for a way to disable the internal ATAPI Jack when the external Jack 3.5 mm is used.

  I am aware, there was a similar thread some time ago, but the problem may be slightly different and perhaps due to the fact that I chose "do not ask me again". At least, I hope this isn't a hardware problem...
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=241409𺼁

  Thanks in advance for any advice

  Don t think there s hardware issue.

  Try this:
  Connect the headphones.
  Go to the control panel-> Sound-> playback tab
  Here, you should see the speakers and headphones.
  Now choose the headphones and set this default value.

  This help you?

• How do I get sound through my iMac with a USB turntable?

  How do I get sound through my iMac with a USB turntable?

  You need something like this:

  https://griffintechnology.com/us/iMic

• PC dv7 Beats Audio. No sound through speakers. Headset plays sounds

  I tried to uninstall and reinstall the software IDT, worked with the helmet on the internet basic sounds.  Tried to set up the sound, but he will say that he was unable to play the sound, but gives the alert ping with the window to appear.  When I go to iTunes and try to play a song or a movie, when I hit the play button it doesn't do anything (it is not still progress in the song as if the speakers were not on). When I click on the audio icon on the toolbar, it separates now between headset and loudspeaker sounds.  I bought the computer it last June, so it is a few months old and I only play many sound through it if it does not make sense.  Is there anything else I can do to fix this?

  HP Pavilion dv7t - 6 c 00

  Windows 7

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp58001-58500/sp58226.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• No sound through your desktop since the upgrade to OSX10.11.2

  No sound through your desktop since the upgrade to OSX10.11.2

  There are several possible reasons for the release of its failure. Please take each of the following steps that you have not already tried it. Some may not apply to your model. Stop when the problem is resolved.

  Back up all data before making any changes.

  1. start by the steps recommended in this support article. Do not skip any step. It is the starting point for further efforts fix.

  2 make sure that you have an installation fully updated to Mac OS X.

  3. If you have installed an application called 'Own memory' or any other third party software that is supposed to 'clean' or 'purge' memory automatically, remove it according to the instructions of the developer and restart. You should do this even if the software is not causing the problem, because it is useless.

  4. other third party which has been reported to interfere with an audio software includes the "Boom" and "Samsung Kies". If necessary, uninstall instructions of the developer (not not by dragging something in the trash.)

  5. If a device AirPlay is selected for the audio release of iTunes (or other applications via third party software such as "Wing"), deselect it.

  6. launch the application 'Setting up Audio and MIDI' by entering the first letters of his name in a Spotlight search and by selecting it in the results (it should be at the top). Select output integrated in the list on the left. If the mute boxes are checked, then.

  7. If a red light is visible in the port of audio when its must play, the internal switch is stuck in the position of the digital display. You may be able to release it by inserting and removing of a mini stereo plug of adequate size. If this is not the case, the machine needs to be repaired. Insert any kind of tool in the port can cause damage that is not covered by the warranty.

  If there is no red light, the switch can always be locked in the position of the helmet. Try to clear the same way.

  8 disconnect all devices wired except the keyboard and mouse, as appropriate. If more than one display is connected, unplug all the extra zeros. Restart and test.

  9. If you have a MacBook Air, turn Bluetooth off and restart.

  10 start in safe mode. Do not open a session; Just restart as usual when the login screen appears. When you do, make sure that the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and the sound does not work.

  11. reset the NVRAM.

  12. Reset the SMC.

  13. triple - click anywhere in the line below on this page to select this option:

  /Library/Preferences/Audio

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item. Move selected item to the trash. You may be prompted for administrator login password. Restart the computer and empty the trash. Re-create your settings in the sound preferences panel.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  14. reinstall OS X after you back up all data.

  15. an appointment of 'Genius' in an Apple store.

• Pavilion dv6: new headphones, but some emissions are transmitting sound through speakers and headphones.

  Spoiler (Highlight to read)

  Hello

  Hello

  I recently bought a new headphones for the game but had some problems with it and the sound system. A major problem is when I have someone call on Skype, the Skype sound or the call will go through the headphones, but on the other audio from the speakers. I also agree that also what iTunes does not work when I am in a call as well. Some examples would be that if I want to watch a YouTube video during a call, noise would come by the speakers and not the headphones. However, I found a solution for this. All I had to do was turn off the main speakers and the audio was transmitted to the headphones. Another example would be that if I want to run the games through Steam (Garry Mod, TF2, ect.), I get no sound in the game. Not through my speakers or headphones. With one exception, volume of Garry Mod, I can hear through the speakers so that in a Skype call, but I want the sound to come through the headphones. But with TF2, I have no sound whatsoever. If you need more information about me, feel free to ask. Thank you.

  Hello @LayneStaley,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how some programs make sounds through the speakers not the headphones and I'd be happy to help you in this case!

  To make sure that your headphones are used when it is connected to your laptop, I advise you to follow the steps below:

  1. click on the Start button

  2. click on Control Panel

  3. click hardware and sound (the icons of sort by 'category' Control Panel) and then click on its

  4. under reading, you should see one or two speaker icons. One of them should have a green check mark next to it (which is the main speakers to your laptop). If the second speaker icon is not visible, right-click in the list of devices and select Show disabled devices

  5. a second disabled icon "speakers" should appear. Right click on this icon, then click Activate

  6. Select the device speaker newly enabled, right click and select "set as default device".

  7. click on apply.

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• Why do you want my piece of sound through my TV sony vaio when I use the HDMI connection

  original title: sound through my tv speakers
  Why do you want my piece of sound through my TV sony vaio when I use the HDMI connection

  Hello

  What version of OS are you using?

  Check if the sound configuration is set to HDMI

  1. click on start, click on Control Panel

  2. click on the Audio tab, select read. Now, check if you have selected Digital Audio (HDMI).

• I am new to the ethernet communication using labview. I don't have any material. I have two laptop, I need to send and receive data through these 2 portable by using labview. Kindly help me on this.

  I am new to the ethernet communication using labview. I don't have any material. I have two laptop, I need to send and receive data through these 2 portable by using labview. Kindly help me on this.

  Dennis has already said: for a direct PC - PC connection, you need a cross over cable. If you connect through a router or a switch, you use a standard cable.

• Is it possible to switch to Win 7 from Vista Home by going through a Vista Business upgrade without actually needing a product key for Vista Business?

  Is it possible to switch to Win 7 from Vista Home by going through a Vista Business upgrade without actually needing a product key for Vista Business? Therefore, if a have a Vista Business upgrade disc, but no product key will be professional Vista upgrade installation such that I can install Windows 7?

  Windows Update has nothing to with the upgrade of Windows. Please repost your question in the support forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• You Tube, after that 11 seconds the video stops, in all and is no sound through the speakers. No noise in the music of cd too

  For example: in You Tube, after 11 seconds the video stops, in all and is no sound through the speakers. No noise in the music of cd too.

  If you get no audio cd, youtube or anything else, you must first check in the volume control that you are using the sound card, you are connected, that nothing is on mute and volume is sufficient, or install the drivers for your sound card.

  Video YouTube can be that your internet connection is slow or too much peoole try to watch the same video, save it to your hard drive and then watch or, give him a minute or two to download in the buffer before you start watching.

• Cannot receive emails through my Outlook Express 6 account all of a sudden. I have 2 computers set up with it, a Windows XP and the other Windows Vista.

  Cannot receive emails through my Outlook Express 6 account all of a sudden.  I can send messages but not receive. I removed all mail rules and blocked senders and I still cannot receive anything.  I tested it by sending a mail to it through different accounts (gmail, yahoo) so I know that there must be some messages.  I also had people reply to my email that I send to what they do, but I don't get their answers.  I have 2 computers in place, using Windows XP and the other is Windows Vista.  I've never had a problem until now. Any help?

  My server contacted me and told me to check my spam using their webmail account, because it was full.  It seems that when I used the rules of the mail I had clicked on delete from the server, just "do not download".  My spam folder was so full that I couldn't receive. Thanks for all your advice!  Mark as resolved.

• HP Pavilion dv6 1335 TX - Mute button is red all the time and not of sound through computer speakers.

  HP Pavilion dv6 1335 TX - Notebook PC (New Zealand)

  MUTE button is red all the time and not of sound through computer speakers. # LED light is 5 according to the guidelines of the manual for the identification of your component externally.

  Processor Intel Core 2 Duo T6600 CPU @ 2.20 GHz, 2200 Mhz, 2 Lossnay, 2 logical processors

  Name of the OS Microsoft Windows 8 Preview version

  Version 6.2.8400 Build 8400

  System Type X 86-based PC

  All drivers works normally and have been checked for updates that were not necessary.

  Turn help would be appreciated

  Hello

  Mute key functionality is provided by IDT Audio software, so the problem may be that Windows 8 has installed a reference driver that does not contain.  Often, the Windows 7 version works Ok, so I would try downloading and installing the following driver IDT.

  http://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48830.exe

  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• try to get sound through my TV

  I have connected my pc to my tv with an hdmi cable and have implemented multiple displays (which shows very well) but I get no sound through my TV? I know it should work as I had sound that goes through when I tried first. Unfortunately I do not know what I'm doing differently. Thank you!!

  Hello

  Cables HDMI support audio signals, but not all compatible HDMI video audio support cards. If your HDMI compatible video card is compatible audio, you may also need to set the audio device HDMI as audio device by default. To check if sound is supported via HDMI, follow these steps:

  (a) click the Start button and then click Control Panel. In the search box, type sound, and then click sound.

  (b) click on the Read tab, and then look for a HDMI device. This appears as a "speaker" icon and is labeled as speaker, followed by the name of the device.

  (c) If you have a HDMI device, click the device, click on set as default and then click OK.

  Change the audio device may require that restart you your computer.

  See also: why don't I hear audio when I connect my computer to a HDTV?

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.