I get pop messages - up who say "NTVDM CPU has met an invalid statement.
Why I get a pop up box that says svchost.exe CPU NTVDM encountered an invalid statement?
Hi Chuck,
Tags: Windows
Similar Questions
-
have a couple of pop ups on my computer that appear every15 seconds or more. It is just an empty box with the title "Windows\system32\wuauclt.exe". Nothing in it. The other is a "16 bit MS-DOS subsystem" box with the following error message: "C:\Windows\system32\wuauclt.exe NTVDM CPU has met an invalid statement. CS:0000 IP:0077 OP:f0 37 05 02 0e choose 'Close' to end the application.
When I choose 'close' or 'ignore' the windows go away but systematically re - appear about 15 seconds later. Now, I am just pass the windows out of the way and can use my computer like that.
I ran scans on my computer but nothing was found.
Since this problem started, my computer automated updates have not been installed. I understand that the above file has to do with automated updates. My Windows Update starts either in the Panel.
I also had problems downloading the file exe running for installation on my computer since...
Microsoft support directed me to this forum for help. Can anyone help?
Hi Hibernatus,
1. did you of recent changes on the computer?
2 when was the last time it was working fine?
3. what happens when you try to start Windows update? You receive an error message?
Method 1
It is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you perform a clean boot and check.
To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
Method 2
The question Windows Update make sure that services associated with the update of Windows running on the computer.
You must be logged on as administrator to perform these steps.
(a) open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.
(b) double click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(c) in the Services window, double-click in the Background Intelligent Transfer Service.
(d) under the tab general , under Startup type, click Manual, and then click apply.
(e) click on the general tab, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(f) in the Services window, double-click the Windows Update service.
(g) under the tab general , next to Startup type, make sure that Automatic is selected.
(h) next to Service status, check to see if the drive is listed. If this is not the case, click pie S, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(i) in the Services window, double-click Cryptographic service.
(j) under the tab general , next to Startup type, make sure that Automatic is selected.
(k) next toservice status, check if the drive is listed. If not, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(l) to close the Services window and try again to install updates to Windows.
Also see the Microsoft article below if you use the Windows XP operating system.
"16-bit MS-DOS subsystem" error message when you install a program
http://support.Microsoft.com/kb/314452
Error message when you install or start an MS-DOS-based program or 16 - bit Windows based
http://support.Microsoft.com/kb/324767
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I GET AN ERROR AFTER EACH UPDATE/MAINTENANCE OF THE GAME, CABAL ONLINE. ERROR MSG: 16-BIT subsystem "ERROR:"NTVDM CPU has met an invalid statement. " Close to terminate the program. "The file may be corrupt is either the update.exe from the game or the command.com in windows system32. This has happened before, and the only thing that I did to get the game back is to perform a system recovery (which im gona not remake). I want to know how to prevent the "update.exe" or command.com to be corrupted every update of the game. I tried to contact the manufacturer of the game, but they do not seem to respond immediately. and their forums are not as useful as I thought it would be. PLEASE HELP ME!
fl0bot,
The message you are getting means that there is some corrupt system files that could not be fixed. If you look in the CBS.log file , it should tell you which files. When you do that, you can try to replace the corrupt files. However this seems to happen whenever you update it a game then you will need to contact their support for aid as this can be a problem for them. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
The NTVDM CPU has encountered an invalid statement
I tried to fix this problem and I went "bleeping computer" and has not been able to solve. When restarting a black screen and a pop-up message was on my screen. I briefly searched in google how to handle this, but I would like an answer of personlized more. Here is the info that was in the message:
16-bit MS-DOS subsystem
C:\Windows\system32\runonce.exe
NTVDM CPU has encountered an invalid statement.
CS:11f5 IP:0100 OP: ff d8 ff e1 00 choose 'Close' to end the application. "Also, I went into the Task Manager to close the message and there is something listed that seemed that there might be something to do with it.
csrstub.exe - allows LUA launch 16-bit applications
My computer also usually during start-up will go to a disk check, it goes through the process and restarts, but I never noticed a difference in the performance of the computer. My computer crashes also up and I have to restart manually, sometimes several times.
I ran malwarebytes and it is clean, MiniToolBox deleted three things, run ESET scan and it was clean.
I get occasional blue screens, sometimes they say 'bad pool head' but I don't know what that means.
I had blue screens and I worked with someone online ran many scans and could not find any problems and suspect it is the hard drive. I was under warranty and I replaced the hard drive, but I always get blue screens. My windows updates are underway, all my programs are up to date.
I don't know what to do with this problem. I really need help.
Any help to fix this would be greatly appreciated. Thank you!
Hello
· You get a code of error with blue screen "bad pool head '?
Follow these methods and check if that helps.
Method 1:
Step 1:
Check if you have the similar problem in safe mode, otherwise you can try to put your computer to a State of clean boot in normal mode and check if it works:
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2:
Follow the article to perform the clean boot on the computer:
How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
http://support.Microsoft.com/kb/929135
Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.
Method 2:
I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem still persists. To see how to the SFC Scan click on the link below and follow the steps in the Kb article.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3:
Follow the steps in the article, and check if that helps.
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233
Method 4:
A pool header problem is a problem with the allocation of memory for Windows. Device driver problems are probably the most common, but it can have various causes, including defective or other writing problems disc and problems with some routers. (In theory, RAM problems would be suspect for pool memory problems).
If you have Windows Vista DVD you can try to run the Startup Repair and The Windows Memory Diagnostic tool to check and Windows Recovery mode if it helps.
What are the system recovery options in Windows Vista?
Alternatively, you can use the command prompt on the recovery mode windows to perform analysis and error correction on a drive letter of your choice by running "chkdsk x:" where x is the letter of your drive. Type the below command on command prompt, and then press ENTER:
X:\>chkdsk/f
/F Corrects errors on the disk
Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
-
NTVDM CPU has encountered an invalid statement
Please help me... i have an error message when I try to open the properties of my computer and dekstop
c:\WINDOWS\system32\rundll32.exe
the NTVDM CPU has encountered an invalid statement
CS:0dcc IP:014E op: ff ff 00 6F 6B choose 'Close' to end the applicationHi obyry,
1. did you of recent changes on the computer?
2. do you have security software installed on the computer?
It is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you put the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
-
Turbo c ++ error: NTVDM CPU has encountered an invalid statement
every time I try to run TC in the bin folder, an error message appears:
NTVDM CPU has encountered an invalid statement
Click on close to terminate the program
I, ve tried to reinstall TC.
system configuration: windows XP SP3, 512 MB ram, 80 GB HDD, Pentium IV 1.8 Ghz
These links should answer your question, I hope:
http://forums.techarena.in/Windows-XP-support/42112.htm
http://www.TechSpot.com/VB/topic5039.html
http://www.RealGeek.com/forums/NTVDM-CPU-has-encountered-an-illegal-instruction-44455.html
Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they should be.
-
When I restart my computer, I get the above message. Apparently, it relates to my "16-bit MS-DOS Subystem. C:\WINDOWS| INSTAL ~ 1\ (8392F ~ 1\4E67E ~ i.EXE is also included in the error message.)
Problem seems to have disappeared, so I didn't try any of the solutions.
-
The attachment ID has wrong format.
When I use Hotmail and try to attach a document to send by email, I get a message error that says 'attachment Id has wrong format", and if the message will not be sent.I have had absolutely no problem in electronic documents before sending.
Please help, thanks.
Hello KerJJ,
The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:
Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.
-
"Attachment Id has wrong format", we hear wat!
If you use Hotmail, I try to send an e-mail, I get a message error that says 'attachment Id has wrong format", and if the message will not be sent. I use the Google Chrome or internet explore and cannot send new or respond to emails without getting the same message... help plsssssemaiView all Windows Live and Hotmail questions in the appropriate forum found here:
http://windowslivehelp.com/ -
I uninstalled Adobe Flash and then tried to download. I get a message from Adobe saying 'Failed to initialize' is there a setting on Mozilla, I need to change to allow the plug in?
Why don't you use Firefox 7?
-
Get pop-up Microsoft that says: "print filter Pipeline host Stopped Working and was closed.
Original title: the printer does not work
Cannot print from any application. Get pop-up Microsoft that says: "print filter Pipeline host Stopped Working and was closed.
Ron BakerSA,
Try to read This THREAD
Rick
-
I get the message "the service user profile Service has no logon. User profile cannot be loaded. »
Original title: cannot open a sessionI get the message "the service user profile Service has no logon. User profile cannot be loaded. "I can't get on my computer. What can I do? Help, please! I need to get the work done.
Hello
These methods should help for Windows 7 or Vista.
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
-------------------------------------------------------------------------------------------------------------------------------------
For Windows 7:
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the prompt here if
necessary.How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html-------------------------------------------------------------------------------------------------------------------------------------
For Vista:
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the prompt here if
necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaHow to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html-------------------------------------------------------------------------------------------------------------------------------------
If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
I have Windows XP and microsoft outlook with Firefox as my browser. When I try to open a link in an email I get the message following if poster "this operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator.
Download and run the file described here;
http://www.local-it-guy.com/tips/restrictions.html
Then click on "set program access & defaults '-custom option and set Firefox as your default browser.
-
I get this message - internet Explorer - data execution prevention has stopped the program
I get this message - internet exployer - data execution prevention has stopped the program and it freezes
Hello
EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspxThe problem might actually be an add-on or another program to the origin of the problem and you should check that
1st.What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
machines, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).Start - all programs - Accessores - system tools - IE with no Addons - does this work better?
IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK
IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK
not better?
Close IE and try again IE or IE with no Addons
IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
"(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
are bad, but some can cause your question. (Toolbars are BHO)
http://securityxploded.com/bhoremover.phpStartup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAlso get Malwarebytes - free - use as scanner only. If you ever suspect malware, and it would be
unusual with Prevx market except for an occasional cookie of low level (not a big deal), update it, then
run as a scanner.I would add prevx so.
Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp-------------------------------------------------------------------
Do yourself a big favor and work through 1 above.
How control DEP but I don't recommend turning it off and certainly not to let power off.
How to enable DEP on or off for a program under Vista
http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.htmlHow to enable or disable DEP in Vista
http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html====================================
If nothing else works you can try this however I would use as a last resort.
IE - Tools - Internet Options - Advanced Options - Security Section - clear the check box enable memory Protection to mitigate
Online - APPLY - OK attacks close and restart IEI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
I get the message that the NVIDIA graphics driver has a problem
maintenance cleaning discget the message that the NVIDIA graphics driver has a problemHello
I suggest you uninstall the drivers from the Device Manager and software programs and features Nvidia.
1. on start and then click Control Panel.
2. click on system and Maintenance, click System, and then click Device Manager.
Note: If the control panel is in Classic view, double-click System, and then click Device Manager.
If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
1. in Device Manager, look for graphics card, right-click, and then click on uninstall.
If you are unable to locate it, then go to view, then select 'show hidden devices '.
2. When you are prompted to confirm that you want to remove the device, click OK.
3. restart the computer.
After the computer restarts, the drivers will be installed automatically. Check if it works very well.If this is the case, update the drivers from windows update.
See also:I suggest update you also the drivers and check.
Update of the hardware driver that is not working properly:
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
I also suggest you to contact NVIDIA support and check.
Maybe you are looking for
-
My ringtone seems to have disappeared as a my tone for text messages and everything else. It was working fine. My phone vibrates still but not sound? Help?
-
800 LTS G1 EliteDesk: windows 10
I bought 15 of these EliteDesk 800 pc for a customer. The customer wants 10 installed windows, but there is no media installation for it. Do I really need to download and activate on every pc or can I clone after the 1 upgrade? Or is there a download
-
Performance of Norton Internet Security
-
Found New Hardware Wizard initiate at startup with no new hardware installed
Hi Xircal, Thanks for your interest. The Malwarebytes we were a beta with a lot of precautions. I ran the Sophos base scan on C:.Nothing that you marked for deletion.Just hundreds of hidden files, mostly in the Recovery Console XP (minint), the RRBac
-
Should I unplug my USB before resetting the router. Carol