Continuous Windows\system32\wuauclt.exe pop up __16 bit subsystem MS-DOS error message: C:\Windows\system32\wuauclt.exe__The NTVDM CPU has encountered an invalid statement.
have a couple of pop ups on my computer that appear every15 seconds or more. It is just an empty box with the title "Windows\system32\wuauclt.exe". Nothing in it. The other is a "16 bit MS-DOS subsystem" box with the following error message: "C:\Windows\system32\wuauclt.exe NTVDM CPU has met an invalid statement. CS:0000 IP:0077 OP:f0 37 05 02 0e choose 'Close' to end the application.
When I choose 'close' or 'ignore' the windows go away but systematically re - appear about 15 seconds later. Now, I am just pass the windows out of the way and can use my computer like that.
I ran scans on my computer but nothing was found.
Since this problem started, my computer automated updates have not been installed. I understand that the above file has to do with automated updates. My Windows Update starts either in the Panel.
I also had problems downloading the file exe running for installation on my computer since...
Microsoft support directed me to this forum for help. Can anyone help?
Hi Hibernatus,
1. did you of recent changes on the computer?
2 when was the last time it was working fine?
3. what happens when you try to start Windows update? You receive an error message?
Method 1
It is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you perform a clean boot and check.
To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
Method 2
The question Windows Update make sure that services associated with the update of Windows running on the computer.
You must be logged on as administrator to perform these steps.
(a) open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.
(b) double click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(c) in the Services window, double-click in the Background Intelligent Transfer Service.
(d) under the tab general , under Startup type, click Manual, and then click apply.
(e) click on the general tab, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(f) in the Services window, double-click the Windows Update service.
(g) under the tab general , next to Startup type, make sure that Automatic is selected.
(h) next to Service status, check to see if the drive is listed. If this is not the case, click pie S, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(i) in the Services window, double-click Cryptographic service.
(j) under the tab general , next to Startup type, make sure that Automatic is selected.
(k) next toservice status, check if the drive is listed. If not, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(l) to close the Services window and try again to install updates to Windows.
Also see the Microsoft article below if you use the Windows XP operating system.
"16-bit MS-DOS subsystem" error message when you install a program
http://support.Microsoft.com/kb/314452
Error message when you install or start an MS-DOS-based program or 16 - bit Windows based
http://support.Microsoft.com/kb/324767
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
I get pop messages - up who say "NTVDM CPU has met an invalid statement.
original title: svchost problemsWhy I get a pop up box that says svchost.exe CPU NTVDM encountered an invalid statement?
Hi Chuck,
There are several reasons why you may see this error message. Take a look at this thread to see if advice or troubleshooting help to solve your problem:I hope this helps. -
Original title: NTVDM CPU C:\Windows\SYSTEM32\cmd.exe__The
I get this error whenever I get online, I've switched so I can't download anything really great, unless it's an offline Installer, can I download another computer.
C:\Windows\SYSTEM32\cmd.exe
NTVDM CPU has encountered an invalid statement.
CS:1214 IP:011 d OP:2e63 20 6 d 6f choose 'Close' to end the application.I have no idea what that means or what he's trying to tell me, all that I know is I think it has something to do with my command prompt... and that's the extent of my knowledge. Hopefully I can help to solve this.
Try restarting. Often, he corrects the NTVDM errors.--..--"Xemas" wrote in message news: 61bbbc96-ba62-46a7-9ed2-cb4fb30b274e...> I get this error whenever I get online, I only have dial-up so I> cannot download anything really big unless it's an offline Installer.> can I download another computer.>> C:\Windows\SYSTEM32\cmd.exe> The NTVDM CPU has encountered an invalid statement.> CS:1214 IP:011 d 6f 6 d 20 OP:2e63 choose 'Close' put end to the> application.>> I have no idea what it means or is he trying to tell me, as far as I know> I think it has something to do with my command prompt... and who has the> expand my knowledge. Hopefully I can help to solve this.> -
At the start, I have this message appears in the box marked 16-bit MS-DOS subsystem
message says:
C:\window\system321D11 Hhost.exe
The NTVDM CPU has encountered an illegal intruction
CS, 1216 IP; OP 0100; ffd8ffe000
choose close to teminate the application
I have cannont download window updates
Try to open an administrator command prompt (menu / right of the mouse over it). Type sfc/scannow
See if that fixes it. What version of internet explorer is on it?
-
Hello
I have recently upgraded to windows 8 and since then, I have a problem.
The Manager.exe HPConnection does not load correctly. An error message is displayed every time that restarting the laptop.
Would you please guide me how to solve this problem.
Thank you in advance and I look forward to hearing from you soon
Best wishes
Hello
Try the following
Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
When this has completed, restart the laptop.
Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.
http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html
After installation, restart the computer again.
Kind regards
DP - K
-
I'm unable to access my LR5.7 of my recent holiday catalog. I am running Windows 7 (64-bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot open another application already has its opening.» Leave the other copy of Lightroom before trying to launch' the problem is, that I can see a copy of the open LR5 and cannot locate the "." lrcat.lock"the specific catalog I want to open the file. I tried to re-boot my computer, but it did not work.
Thanks Geoff. I was finally able to locate the "." lrcat.lock' of the relevant folder to the catalog I want to open. Once I deleted it, LR5 was able to access my images. Problem solved. Thank you
-
I get this error message when starting windows - the message is:
Vandenberg Clyde Punjab Scottsdale Columbia Watertown Hebrides has stopped working and I'm not that mean?
and since i ' v got this message I can't use internet explore properly and when I lick the icon to lunch the internet explore I have a blank page, but if I do a right click on the internet icon one select run as administrator, it works without any problem can someone help me?
Ahmed atta
Egypt
Hello
Please let us know if you are facing problems when you use Internet explorer on the computer and is the fixed startup error number.
Use the method to send the snapshot to the question below.
Use capture tool to capture screenshots
http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots
Use SkyDrive download collected files and after shot/screenshot.
-
I can't get windows vista to start, because the user profile seems to be corrupted. I tried to start in safe mode to no avail mode. the system recognizes my name and graphic symbol, but does not progress beyond the error message.
Help, please
I can't get windows vista to start, because the user profile seems to be corrupted. I tried to start in safe mode to no avail mode. the system recognizes my name and graphic symbol, but does not progress beyond the error message.
Help, please
Please use this tutorial:
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html -
Original title: extended attributes
I started getting the following errors with various programs "extended attributes are incompatible" and "Consent UI has stopped working". I tried to do a system restore but get error inconsistent attributes for 'rstrui.exe '. I also had the message to ShellExecuteEX.exe when you try to install an application and even trying to download the Windows 7 Upgrade advisor. Just to check, I tried to run msconfig from the start and even gives me the message attributes. I am running Vista Home Premium with Service Pack 2 installed. Advice please. Thank you, Roger P
Hi Roger P.
· When the issue started?
· Remember to make any hardware or software comes to the computer before this problem?
· What antivirus application is installed on your computer?
Method 1:
You can try to run a SFC scan and check.
This problem may occur if a system file is missing or damaged.
You can refer to the method-the System File Checker tool in the following article:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
I suggest you to follow these steps and check if that helps.
Methoad 2: try to run the windows recovery option system restore.
What are the system recovery options in Windows Vista?
It could be useful!
-
iCloud calendar shows constant pop up on the bad URL 404 error message
Someone please help me with this. Its been going on for months and I am at my wits end. I can't use my calendar on my Mac at all without a constant pop up every few seconds telling me that my calendar iCloud server responded with an error 404. I've updated to El Capitan, when it came out but only had this problem from about 3 months ago. How can I fix it?
Your screenshot came through.
A calendar that you subscribe seems not work more. You may unsubscribe to it.
-
I tried to install a new HP LaserJet M1217 with a wireless connection to my PC (HP G60 with operating system Windows 7 64-bit). I spent many hours trying to a simple task. I have not in all instructions and options slowly and kept my concentration without success. I have the method wireless attempt, the method of USB, the method of attached CD-Rom and downloaded from the HP website. Always without success.
I followed the instructions of troubleshooting and always without success.
I currently have a HP LaserJet P1102's wireless installed. It works perfectly. I have a wireless HP7280 all-in-one printer installed prior to my purchase of a new M1217. I uninstalled the software of HP7280 before my attempt to install the new M1217.
I don't have any type of error except the computer would stop downloading for all options except the web download procedure. The web left me hanging with no next steps after being downloaded.
I'm exahusted after several hours of attempted an installation. I can get the M1217 print when it is attached to my PC via the USB port. How can I get to print and scan wireless?
Thanks for your suggestion. I had already downloaded the PDF file and followed the instructions without success.
I received a diagnosis of the HP media card and I was able to complete the installation.
-
He ran.
After finishing, the program finds corrupted files, but could not fix them.
Enter windows/logs/CBS, I found that access was denied... so I couldn't read.
Maybe, try to get in the log from a high CMD prompt.
-
Hi all
An error message appears every time I start my laptop Alienware of window 7, the message reads: "wscript.exe - no disk" there is no disk in the drive. Please insert a disk into \Device\harddisk1\DR1.
I'm a bit confused with this error message, I don't know if there are viruses in my computer, or the reason why this error message whenever I start my computer,
Although I installed file encryption software.
This could be a virus? and how to prevent this error message appear on my computer.
Sounds like malware. Run msconfig.exe, and then selectively uncheck items under the Startup tab until you find the culprit.
-
Get error message - Activation.exe (0xc000007b).
Original title: Activation.exe
Hello
I receive a general error message - Activation.exe (0xc000007b). I have a Sony Vaio VPCEC3SOE, running Windows 7, anyone got any ideas?Thank youMarkHello
Often we see a strange behavior as the result of a program from loading at startup. To solve these, we use the clean boot troubleshooting. The following article describes this process: How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7
Best regards
Matthew_Ha
-
Install EZ transfer on Windows XP (32-bit) I get an error message stating:
"You are not allowed to update Windows XP. Please contact your system administrator. »
However, I am the only user, and I am named as the administration system. How can I fix?
Hello
Step 1:
You can try to install Easy Transfer in safe mode and check.
A description of the options to start in Windows XP Mode
Step 2:
You can also try to create a new administrator account and check.
Maybe you are looking for
-
Portege M800: The fan is almost always on
Hello! I have a Portege M800 M105 with Vista 64 bit. The fan is almost always on despite the fact that the temperature of the CPU is about 43 to 46 Grad Celsius and the CPU has nothing to do. I used the program Speedfan (http://www.almico.com/speedfa
-
not able to hear the sound of the cellular caller
my brother bought a Apple Watch 38 mm sport. But after the update to os 2.1 we couldn't here the voice of the caller please say a quick solution Rgds Ajith
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: You have problems with programs Error messages Recent changes to your computer What you have already tried to solve the problem
-
HP Officejet Pro 8500 'unavailable' for Mac OS 10.7 installation software
Try to set up this printer to MacBook via USB cable. Computer recognizes the printer and looking for appropriate software updates to install the printer. Several attempts have resulted in all "software is currently not available, contact the manufact
-
BlackBerry Smartphones how suspend bis email
Hello, new here. When I'm home or to my office how do I suspend my emails using BIS, so I do not get emails on my BB duplicate. It's a pain to have to delete them on my BB. Thank you Chris