I get the error code 80070005 when I try to search for updates by using Windows Update.
I use Windows Vista Home Premium with Service Pack 2. I tried to run hard, but that has not solved the problem.
Hello
I suggest you to go through the steps mentioned in the link and the Coachman.
Method 1:
You cannot install some programs or updates
http://support.Microsoft.com/kb/822798
If the steps do not help to solve the problem, you also, try the steps mentioned in the link and check out them.
Method 2:
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997
Hope this helps and keep us posted.
Tags: Windows
Similar Questions
-
I also get the error code 80070005 when you try to use Windows Update to check for the updates
I get this error code as soon as I try to check updates. It does not even say there are updates tells me to enable updates, but when I try it gives the code. I used Microsoft Fix and now it says everything is fixed and ok but it is not. So now what?
Hello
1. what Microsoft fixit did you run?
2. don't you make changes to the computer before the show?I suggest you try the steps from the following link:
Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
http://support.Microsoft.com/kb/968003Note: When you perform a virus scan Malware, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.
-
I get the error code 80070005 when you try to download updates 'KB975364' and "KB972145" _
I can't get these important updates. I tried for more than a week to get them, and no new updates have not developed since then. No solutions are available in the help and support center or online.
Hello
Right-click on the Windows updates - and HIDE
Download from the Download Center, and then install them.
KB972145
http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basicI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
I get the error code 646 when I try to install windows updates.
I get the error code 646 when I try to install windows updates. I have Windows Vista Home Premium. I disabled my firewall and I still get the error code 646.
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
I get the error code 80246008 when you try to update.
I get the error code 80246008 when you try to update. I tried everything to repair windows at the attempt of essential security analysis of windows. Yet its does not work and I can install updates or download microsoft windows. can anyone help?
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80246008
This should help.
-
I get the error code 80070005 when you download Windows updates
Original title : I use Windows 7, Vista Home Premium on a laptop. I can't download updates and get the error code 80070005
When you try to update, I get the error code 80070005. System: 64-bit, service pack 2, M-6880 of Gateway computer memory 4.00 GB
Hello
1. what day you're talking about?
2. don't you make changes to the computer before the show?
Please follow the steps below.
Method 1:
Step 1: Put the computer to boot.
Click on the link below
http://support.Microsoft.com/kb/929135
NOTE: after you install the update properly, restore the computer to start as usual (see step 7 link mentioned above)
Step 2: Download and install updates from Microsoft Download Center manually.
a. visit the Microsoft Download Web site, type the number of "KB" in the search box and press ENTER.
b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.
c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.
d. When you are prompted, click open to install the update.
Microsoft Download Center
http://www.Microsoft.com/download/en/default.aspx
Method 2:
Run the Microsoft Fixit from the link below.
http://support.Microsoft.com/mats/windows_update/
Method 3:
Reset components from Windows Update from the link below.
Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://support.Microsoft.com/kb/322756
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/971058
Method 4:
Follow the steps from the link below.
-
I get error code 6046 when I try and install updates KB973593, KB973704, KB975960 and KB974661 and am invited to re - download the updates (which aren't yet.) Help, please.
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
I get the error code 81 when I try to install creative cloud. Help!
I was a member creative cloud for more than a year. I tried to download lightroom and nothing happened so I tried to uninstall the creative cloud. Now, I try to reinstall and get the error code 81. I deleted every installer that I can find on my computer. Help!
uninstall, clean (use the CC cleaning tool to solve installation problems |) CC, CS3 - CS6) and reinstall.
-
I get the error code 2908 when I try to install Windows 7 Premium update for mVista
Setup has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2908.
While waiting for a response I waas able to install Windows 7. Thank you.
-
I get the error code 80070005 when you click the Windows Automatic Update button.
Basically, the title says it all. When you click on the button to auto update error code 80070005 arrives. What should I do?
This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.
http://support.Microsoft.com/kb/929135
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 -
Get the error code 0x80070005 when you try to save
Original title: error codes
I tried to backup my pc to an external hard drive when I received an error message: 0x80070005. I studied this error and found a fix for the "microsoft help. While downloading zip files, I got another code: 40?
I am running Windows Vista and Microsoft Security Essentials.Hi Simon,.
You receive the error code 0 x 80070005 during backup.
Click on the link below and see if it helps.
Hope this information helps.
-
Get the error code 646 when you try to download the update of April 10
I am trying to install an update in April 10,2012 and the code646 of error appears and it let me download the update? What should I do?
Hello
1. what day you're talking about?
2. don't you make changes to the computer before the show?
Please follow the steps from the link below.
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://support.Microsoft.com/kb/322756
How to back up and restore the registry in Windows
You receive the error code: 0 x 80070646, error code: 646 or error code: 1606 when using Windows Update or Microsoft Update
-
I get the error code 5 when I try to start the Windows Firewall
Original title: Windows 7 x 64 firewall won't start, tried everything
Hi, ive tried enough what was described in the first 10 pages google search, but I cannot get rid of the known problem of firewalls
For me, this is the error code 5.
As soon as I try to start it manually, it says cannot be started.... error code 5.
I did a system win7 files repair, I did a reset of network, I tried about 30 different commands to display information about the firewall service, ive checked the firewall authority loading driver, I gave permission to complete firewall of all registry directories described, ive created entirely new firewall rules 1:1 to the default ones, ive checked other 'ordinary' process runs in the firewall service and and and.NOTHING helped me.
Others facing this problem actually get another error for the first code after a few solutions, they also face the "error code 5.
Oh yes, I also tried the microsoft firewall tool.
He says theres a problem with the firewall, but can not solve.I never had no infection or OneCare / 3rd Personal Firewall running.
And because I can't deal with that firewall, I also can not use transferred ports - which is terrible bad since im was the owner of a local game server.
But that happened in ive faced the problem as it was half a year ago. And I can't be solved without format my drive.Because you guys are part of Microsoft personnel - and has got the possibility to contact the developers - why cant you just create a firewall package with latest updates that crushes real files/settings in order to solve problems that are found by your own tool?
Its a shame, I hope that you can offer me new solution :(
-You are using a third-party firewall software?
At no time.Was there the recent changes on your computer before the show?
No, not at the time the problem occurred, also not 1-2 weeks before.Method 1:
Returns the error Code 5, as I indicated in my problemMethod 2:
Tried 2 - 3 times yesterday, , everything including the Microsoft Tool to automatically fix problems.
I've done a complete check-up and recover system, no modified files files have been found.Also, the batch file to start/restar services:
SC config start = auto MpsSvc - success
SC config start = auto KeyIso - success
BFE sc config = auto start - success
SC config start = auto FwcAgent - fail ' [SC] OpenService error 1060 - service is not installed.net stop MpsSvc - Service not started
net start MpsSvc - cannot be started - error Code 5the rest - success, but still, the firewall service does not.
Seems that the firewall service or part of it gots uninstalled something?
Perhaps in the case of update?Also I can't find no "FwcAgent" file in my system drive while showing the system hidden files and folders.
I guess that's NORMAL given that verification of files windows did not find any changes.
Theres no light at the end? Really?Moreover, the hotline also could not help (and you get his terrible btw, managed a total noob). The suggestions here are much "deeper", still nothing worked again.
--------------------------------------------->
EDIT:
Looking around the means how to re - install the firewall component windows I found another unofficial repair tool.It fits quite all associated in any way with the security settings and firewall components, as it recreates all the rules and rights of dirs and registry keys.
And what should I write - it WORKED.
Let me share with you: http://www.tweaking.com/index.php?/content/page/repair_windows_firewall.htmlAND YES:
Someone should stick this tool in front of microsoft developers, but the hard way.
How is it, some hobby programmers can create these simple tools that beat anything from microsoft developers?I hope that my solution works for the many thousand other ppl that I found on the net - who could not solve their problem (even) with the firewall in vista/windows7.
Please mark this topic as "BOLD" and possible GREEN :-)
Thanks again for your help, John Rubdy! -
The last update my computer (Vista Home Basic) tried to download and install is the Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86... According to Windows Update. The problem is, it always ends up telling me that the installation failed due to the error Code 821. I found nothing covering this error code on the Microsoft support page. Why am I and how to fix it?
Hello MadHatter106,
The link below contains several options that you can try for your problem of .NET. I would first try the repair facility. Then the uninstall option.
http://blogs.msdn.com/astebner/archive/2009/03/04/9459067.aspx
Thank you for using answers Forum. Please let us know how it works.
Joseph
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
get the error code 80070643 when you try to download kb2931354
I am trying to download KB2931354 Windows Vista SP2 and Windows Server 2008 SP2 x 86 (K2931354). Tried twice and get an error code 80070643. Can anyone help?
Hello
Windows Update error 80070643
http://Windows.Microsoft.com/en-us/Windows/Windows-Update-error-80070643#1TC=Windows-Vista
Maybe you are looking for
-
The new App Store for El Capitan update has locked up my macbook pro. Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't. How in my machine to begin troubleshooting?
-
Is Satellite 1900-102 supports USB 2.0?
Is Satellite 1900-102 supports USB 2.0?
-
Where is past s.o.s. keychain to in El Capitan?
Where is past s.o.s. keychain to in El Capitan? It is not more.
-
I want to disable indexing of my computer via the control panel... I tried, but failed. Can someone give me a route step by step on how I disable indexing with the control panel function?
-
unknown device on PCI Express Root Complex
Unknown device on PCI Express Root Complex What drivers are needed for the following error: "unknown device on PCI Express Root Complex . The drivers for this device are not installed. (Code 28) » Device ACPI\HPQ6001\3 & 11583659 & 0 ID of my laptop: