I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.
I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.
Installed the new hard drive on my Toshiba laptop and when I ran my recovery disk, Windows Vista installed, but when I restarted computer I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.
Help, please.
Your error message, the problem is probably caused by BIOS or DVD settings or bad cabling to SATA hard drive. Please do the following to narrow down because of the problem.
(a) ensure that all laptops the same hardware, the same manufacturer and the same model.
(b) upgrade the BIOS to the latest version; go into the BIOS and enable "Load Fail - Safe Defaults".
(c) If you connect the SATA drives, please configure the SATA controller in compatible mode in the BIOS.
Tags: Windows
Similar Questions
-
original title: RunDLL
I get the window followed whenever I click on an image or a file:
There was a problem starting c:\Users\Jim\AppData\Local\Temp\seitybu\sxxqrbw\wow.dll that the specific module could not be found
Can anyone advise on how to fix?
Hi Jim,.
I suggest you to navigate to the location of the file in the error message and check if it doesn't matter what suspicious file is present. There could be opportunities that your antivirus software would have deleted a few infected file, but would have left a few remnants, which is the origin of the problem.
I suggest you use Microsoft safety scanner and look for viruses in your computer.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software. Here is the link to launch the Microsoft safety scanner.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Warning: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.
Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Let us know the State of the question, so that we can help you.
-
Error message: a message session could not be started. Please check your MAPI installation - sending email from MYOB
When I try to send an email to MYOB I get error message saying: "an email session could not be started. Please check your MAPI installation '.
How can I solve this problem?
Hi all
I have a workaround which is a little less boring that the patch "restart the PC": If you get the error where MYOB crashes when you try to send an e-mail, open Task Manager (ctrl-alt-del or right click on the start bar), then go to the "Processes" tab and close all instances of wlmail.exe using the button "complete the process".
It seems that this error occurs if you have Windows Live Mail opened when you try and send emails of MYOB. If you then close WLMail after that get the error the process seems to never close, so you have to close it manually. If you send all your emails with closed WLMail MYOB it seems to be OK.
See you soon
-
Outlook Express 6
Hello
Recently, if I send a big PDF file via outlook, after attempting to send the files, I get an error message saying that the mail has not been sent. The files remain in the Outbox, but when I check with the recipient, they confirm that they have received the mail! This has only recently begun to happen. Any suggestions? Thank youCheck: File | Work offline and in: reviews | Layout: uncheck the preview pane. Open the Outbox and delete the message.If that does not create a new box of sent, and sent items.Follow these steps for the Outbox and sent items after you move the messages you want to save to a local folder that you create.Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.With OE closed, find the Outbox.dbx and Sent Items.dbx file and remove them. New files will be created automatically when you open OE. -
Hello
I have a fujitsu lifebook p series windows 7 and every now and then especially when I am looking online I get the error message saying: my graphics card is not responding and the laptop stops or gets himself. I challenged tech stores to be looked at, but they were not able to fix it. Does anyone have any suggestions? Thank youOriginal title: help again...I have moved your question to area drivers & hardware.
If your PC uses the Intel chipset, see this: http://communities.intel.com/message/172740#172740
Updated drivers can be made of:
https://Downloadcenter.Intel.com/default.aspx
Best bet may be to contact the vendor of PC.
-steve
-
I use a mac and would like to buy the package of Lightroom. I had the trial and it was fine. I was enrolled in the Belize and I get an error message saying that the country is not supported. In the United Kingdom, I changed my region and I still get the same error message?
Hello
Try to subscribe through pricing and membership creative cloud plans | Adobe Creative Cloud
Hope that helps!
Kind regards
Sheena
-
help and support does not work
When I select Help and support icon, I get an error message indicating that the feature could not start.
I use a Vista 32 bits on a HP computer operating system model number m8300f.
In addition, I bought a copy of Win 7, but who could not load freezing during installation.
Hello
Try to run the command in the elevated command prompt, follow the steps below, it could help us solve the problem.
1. open the start menu, click programs principally made, select accessories.
2. right click on command prompt, and then click "run as administrator ".
3. type the following commands in the DOS prompt window and press ENTER at the end
of each line:REGSVR32 MSXML3. DLL/U
REGSVR32 MSXML3. DLL
REGSVR32 MSXML6. DLL/U
REGSVR32 MSXML6. DLL(At the elevated command prompt command should not give us any error).
Restart the computer and try to access help and Support.
For the problem of installation of windows 7.
We would like to get more information about you to help solve your problem. You better, please answer the following questions.
1. How did you start the installation process?
2. you perform a new installation or an upgrade?
3. what type of drive you are using for installation?
4. at what stage of the installation has it stopped?
5. have you received an error message?
First of all, I would say that you disconnect external devices connected to the computer except the keyboard and mouse.
If you have performed an upgrade suggests to restart the computer and you will be prompted for a roll back option.
Once you're on the office suggests to run Upgrade Advisor and check what needs to be done before you start the upgrade.
Before you begin the upgrade process to ensure that your computer meets the condition of equipment to install Windows 7 and check on the website of manufacturer computer if the computer is good to run windows 7 or not.
Installing and reinstalling Windows
http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows
-
I have synced my creative files could (trial versions) on my Apple MacBook Pro laptop. I constantly get an error message that says, "some files could not be synchronized." I'm at 2 GB of capacity. What now?
Links for synchronization of files that can help
-https://forums.adobe.com/community/creative_cloud/host_sync
-http://helpx.adobe.com/creative-cloud/kb/arent-my-files-syncing.html
-http://helpx.adobe.com/creative-cloud/kb/cannot-share-certain-types-files.html
-Size limits https://forums.adobe.com/thread/1488242
-
My HP officejet 4500 works very well on my Toshiba laptop (my computer only and not shared) but windows has an error message saying that the printer driver. How to stop this message?
Visit the HP website and download the driver you need.
Good luck.
-
I get an error message saying 'installation failed' - what can I do about it?
Hi, I paid just for Adobe Creative Cloud and when I started trying to download applications, it is about 80% then says "Installation failed". I followed the instructions on-screen very little to try to fix them or even know what it is but I am nowhere. Anyone has any suggestions as to what the problem might be/how can I fix it?
Troubleshoot installation with the log files. CS5, CS5.5, CS6
-
I installed Win7 using a .wim that I used successfully several times before. The .wim is on my USB and the computer is not connected to the network. Using a disk to start Windows PE and imagex, I applied the image. When Windows 7 was started for the first time and prompted me to a computer name, I entered a name with only lower and upper case characters. An error message told me that some characters that I had used were not valid and listed the characters not valid, which I had used.
What is my next course of action?
I did a hard reboot and Windows later accepted my computer name.
This has been resolved.
-
* Original title: laptop Dell XPS - driver Sigmatel C-major
My laptop Dell XPS sound worked but comes although Sigmatel C-major driver does not work. I downloaded the Dell site driver & installed. There is now no sound. A cross appears on the "speaker" icon.
Hi Deepak,
Thank you for your response.
I'll be happy to help you with this.
The player may not be able to read a file, even if you have selected the type of file. This can occur if the file uses a codec that is not installed on your computer. For more information about codecs, including on how to download them, see Codecs: frequently asked questions.
For more information, see the links.
Change the file types that play in Windows Media Player
http://Windows.Microsoft.com/en-in/Windows7/change-the-file-types-that-play-in-Windows-Media-Player
Information on the types of media files that supports Windows Media Player
http://support.Microsoft.com/kb/316992
If you have any questions on Windows, feel free to let us know. It is our pleasure to be of service.
-
Hello
I have a huge problem. The laptop has an account of user Karina, who was also the Manager. But I opened another account, WAZ. Has decided to make the administrator Flippie and Karina just a standard user.
Now my problem is that Flippie has disappeared from my laptop. Cannot find and I'm in trouble because I don't have administrator access. You will appreciate all help.Hello
1. are you able to connect account Karina?
2 have you made any changes to the computer before the show?
3. you are in a domain network?
If you are able to log onto the account of Karina follow this:
Method 1:
How to check the user account is disabled:
1. open the start menu, type lusrmgr.msc in the search line and press enter.
2. click on the users in the left to open pane folder the users and groups.
3. in the middle pane of the users, double-click the name of the user account (ex: example-account)
4. on the general tab, clear the account is disabled , and click OK.
5. Once completed, close the window to local users and groups.
6 restart the computer audit are you able to see another user account.
Method 2:
Activate the built in the administrator user account and check:
1 restart the computer and keep tapping F8 until you reach the start menu.
- Click repair your computer.
- Click the operating system you want to repair, and then click Next.
- In the System Recovery Options dialog box, click command prompt.
5. at the command prompt, type net user administrator / Active: Yesand then press ENTER.
6. type net user administrator
, , and then press ENTER.Note: Please replace the tag
with passwords which you want to set for the administrator account. Type exitand press ENTER. Restart the computer and check.
I hope that the above information is useful!
-
I am trying to load Windows Vista on my computer and the installation, I get an error message saying I have to close the installation program and select programs and uninstall Windows PowerShell, I have no idea where I can find, I need answers, thanks in advance
original title: where to find WIndows Poweershell?Go to programs and features, select view installed updates. You should find an entry for Powershell. Select it and uninstall.
-
Original title: .net framework 4.6
I try to install the software and I get an error message saying
Setup cannot continue because a previous installation requires your computer must be restarted. Restart your computer and run the Setup again.
so I restart my pc and run it again and the same message appears
Try to perform a "clean boot" to start Windows by using a minimal set of drivers and startup programs. This will eliminate software conflicts that occur when you start Windows, install a program or an update or when you run a program in Windows.
http://support.Microsoft.com/kb/929135Perform a clean boot to determine if background programs are interfering with your game or other programs
http://support.Microsoft.com/kb/331796One by one add back an application both in the boot list to find the software application incriminated.
J W Stuart: http://www.pagestart.com
Maybe you are looking for
-
What is the quickest way to open a picture of El Capitan pictures in Adobe Photoshop CC? Why Apple continue to make everything more difficult, inefficient or even impossible in the case of certain iOS apps?
-
Driver for wifi &; Bluetooth
Can someone give me wlan/wifi & Bluetooth software driver for the laptop model: HP 14-D101TUI searched a driver but cannot find...
-
conversion of scanned documents to pdf docs .tiff
I'm scanning my docs of Canon MX860 all in one machine. I am not given the ability to scan on save to my computer in pdf format. How to convert these documents to pdf format?
-
Download has been a success, install gets 1/2 way & fails, with error code 0x66A. I can't find this error code in the lists. Finally, subsequent updates were installed successfully.
-
Diagnostic report (1.9.0027.0): ----------------------------------------- Validation of Windows data--> Validation code: 50 Code of Validation caching online: 0x0 Windows product key: Windows product key hash: Windows product ID: 00359-OEM-8992687-00