I get the following error: error \mset16g.dll specified module could not be found. I am running XP on top of vmware fusion

Similar Questions

• Marketing, Windows XP displays "error loading msinuc32.dll specified module could not be found.

  While starting up, Windows XP displays "Error loading msinuc32.dll specified module could not be found" help me solve

  Hi Rahmansherif,

  ·         Did you do changes on the computer before the show?

  Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

• RushDownload.dll error... specified module could not be found

  I get this message just after the start.

  It is said that 'he was, a problem starting C:\Users\xxx\AppData\Local\RushDownload\{EB999BCB6-06B0-052E-44C0-70D5E16BE6E1}\RushDownload.dll.

  The specified module could not be found.

  Help, please... :)

  It is probably a remnant of some malware that your virus scanner deleted. Run msconfig.exe and then selectively uncheck items under the Startup tab until you find the culprit.

• Half-life 2 says failed to load the Launcher DLL specified module could not be found

  Failed to load the Launcher DLL:

  the specified module could not be found

  Hi Madoo17,

  Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.

  1. Once you get this error message?

  2. it worked before?

  3 did you changes to the computer before the show?

  Perform the steps:

  Method 1:

  Put the computer in a State of boot is a way to know which application is causing this problem.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Step 1:

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  Follow the steps in the link below to do the same thing:

  How to configure Windows XP to start in a "clean boot" State

  Note: After troubleshooting, be sure to set the computer to start as usual as shown here:

  Step 2: To configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. Click Start and then click Run.

  b. type msconfig and click OK. The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  d. When you are prompted, click on restart to restart the computer.

  Method 2: Use the (SFC) System File Checker tool.

  SFC system gives an administrator the ability to scan the files all protected to check their versions. If the System File Checker detects that a protected file has been replaced, it retrieves the correct version of the file in the folder cache (% Systemroot%\System32\Dllcache) or the Windows installation source files and then replaces the incorrect file. System File Checker verifies and repopulates the cache folder also. You must be logged in as an administrator or as a member of the Administrators group to run the System File Checker.

  Check out this link to do the same thing:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Hope this information helps. Please reply back with the State so that we can help you.

• I can't open my I tunes. I get the following error message: I tunes application could not be opened. Required folder cannot be found.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Please repost your question in music and its Forum: http://social.answers.microsoft.com/Forums/en-US/vistamedia/threads where people who specialize in audio problems (like the ones you're having with iTunes) will be more than happy to help you with your problem.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error message when starting. C:\WINDOWS\system32\gijsgkuj.DLL specified module could not be found.

  This error message has appeared for some time now, but it does not seem to harm my pc, other than very slowly.  What is the feature of this module?  Do I need for normal use?

  johnedr1,
  You can check that you spelled the file correctly?  I wasn't able to find that everything about this DLL.  If you have any specialized software it can be part of that.  But something during startup tries to call this file and find do not.
  You can make troubleshooting by performing a clean boot.  Here are the links that will explain the process in detail.  Short of this, you disable the elements of all Microsoft and if the error Stops, then add points back until you find the program\process which is the cause.

  Follow the steps in this article to resolve problems with a clean boot.

  http://support.Microsoft.com/kb/310353

  Boot advanced troubleshooting: http://support.microsoft.com/kb/316434

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• On startup, I get a msg of error DLL RUN as follows: 'there was a problem starting C:\ProgramData\ctfmdctr64.dll. The specified module could not be found. »

  I am running Win 7 Pro.  On startup, I get a msg of error DLL RUN as follows: 'there was a problem starting C:\ProgramData\ctfmdctr64.dll.  The specified module could not be found. »

  The error msg box provides an OK button. After clicking this button, everything seems to work well.

  FYI, I use AVG Virus Protection program. I did a system restore to a date before when I think that this problem started. No luck there.

  I suspect some malicious programs hiding somewhere and part of it may have been removed by AVG, but not all.  Anyone know what program calls for this file? How can I get rid of this problem?   Any suggestions would be welcome.

  Thank you.  f* address email is removed from the privacy *

  Disabled under msconfig.exe startup items are moved to this location in the registry:

  HKEY_LOCAL_MACHINE Tools\MSConfig
  To permanently delete, you can delete the key relevant to this place. Method of the prudent man will like so:
  1. Burn a CD of Windows repair. Everyone who makes his own PC must have a maintenance.
  2. Create a System Restore Point.
  3. Start the computer with the CD in repair and check if the above Restore Point is visible.
  4. Start normally.
  5. Remove the offending registry key.

  Please mark my answer as 'Response' in this thread so that it can be closed.

• As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." How should I do?

  Original title: Rundll error help

  As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• I get an error, "C:\users\gary\appdata\local\apple\adobe\wrtmnpl.dll the specified module could not be found" on startup.

  It appears to start on the last page of office?
  How to fix or get rid of this coming on all future start-up?

  Original title: run dll X error loading C:\users\gary\appdata\local\apple\adobe\wrtmnpl.dll the specified module could not be found.

  Hello

  Thanks for posting your question in the Microsoft Community Forums.

  You get an error at startup.  It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) that you get an error code?

  (2) did you do changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  Step 1-

  You should check if the problem occurs in Mode without failure.

  See the article-

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Note: Make sure you connect in Normal Mode after all the troubleshooting steps.

  Proceed to step 2, if the problem does not occur in Mode without failure.

  Step 2-

  I recommend you to perform a clean boot.

  Placing the computer in a boot minimum state helps determine if third-party applications or startup items are causing the problem. You must perform the steps in the article-

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: You must follow the step 3 of the article to return the computer to a Normal startup after you perform all the troubleshooting steps.

  Check if the problem persists.

  Method 2-

  I would have you scan a System File Checker to verify violations of integrity.

  See the article-

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  We know if you need help. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• In Vista, get a DLL error on reboot, 'error loading C:\Users\...\AppData\Local\odokiwikisoxe.dll. The specified module could not be found.

  On reboot, I get a RunDLL message "error loading C:\Users\...\AppData\Local\odokiwikisoxe.dll.  The specified module could not be found.  How can I fix?

  Hi MelP1802,

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  Follow the mention of steps in the Microsoft article and lets us know if the question get it fixed.

  Method 1: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Try the SFC scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

   

  http://support.Microsoft.com/kb/929833

  Method 3: Also I suggest you analyze your computer Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malware

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information helps.

• On startup, I get two error messages. Error loading C:\users\Jack\appdata\lcal\dmptexys.dll the specified module could not be found

  On startup, I get two error messages. Error loading C:\users\Jack\appdata\lcal\dmptexys.dll the specified module could not be found

  This could be caused by malicious software. Your antivirus may have removed part of it or prevent it install completely.

  Run a full scan with your antivirus, download and run Malwarebytes Anti-Malware freehttp://malwarebytes.org/

  To prevent the display of a message run Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx . You can look up the references to the file and disable the entries.

• execution of DLLs. Error loading cbbxw.dll. the specified module could not be found. -what it means and how do I get rid of him?

  execution of DLLs. Error loading cbbxw.dll. the specified module could not be found. -what it means and how do I get rid of him?

  You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• After the clean boot get error loading awuspn.dll and load yabbyx.dll error. The specified module could not be found

  Hi Thahaseena,

  Thank you for helping! Finally I solve the problem of the error1324.but there were other questions come, after I did the clean boot and restart the computer then log, the window came several times put warn against the "Rundll":) 1 awuspn.dll 2) error loading yabbyx.dll loading error (both happened to uo WARNING several times). And boths display the message "the specified module could not be found. I tried to restore the computer to the State at the beginning, but it has no will to restore before the own boot.would you please help me to solve this problem again?

  Thank you

  Well, I want you to do is run MalwareBytes.  You say you already ran MalwareBytes after the clean boot, and then tried to reload regularly?

  Whatever program you have downloaded to fix the missing image file sounds like he came by malicious software.  What is the name of this program.

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• "iphbrbtf.dll the specified module could not be found" error starting

  When you open my computer laptop OS xp, got this message at the opening of service pack 3, I got this error RUNDLL XP loading C:\WINDOWS\system32\iphbrbtf.dll the specified module could not be found.  How can I remove this annoying message?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update, and make at least an analysis full (not at the same time) with these free malware detection programs:
  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there is more to 1, 122, 311 and the new threats are detected every day.  Always update your virus definitions before running a scan.

  Restart your computer and solve the outstanding issues.

• What is this error? Error loading c:windows\mcycol40.dll the specified module could not be found

  Windows XP is giving the following error message and there is NOTHING to be found anywhere on this subject.  Help

  RUNDLL

  Error loading c:windows\mcycol40.dll

  the specified module could not be found.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you can't find a good explanation for the name of the file in a Google search, re chances while your system is currently or has been infected with malicious software.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.