I had a computer with a dead HDD p6510f so I thought the upgrade also.
HP pavilion p6510f, Win 7, 4 GB of ram with a dead hard drive. I thought to upgrade the Athlon II X 4 630 to a Phenom II X 6 1045T at the same time to get more power calculation, but for the money I am better doing a map of graffiti instead? I'm not a gamer but do a lot with the video and it's a little slow. I also plan to go with a 32 or 64 GB of SSD to put the operating system and a 500G to 1 t hard drive to store data. How can I get the xtra power for additional components connectors?
se77,
A simple reading of the plug on the upgrade of processor p6510f reflects no Pheom II X 6 support: http://support.hp.com/us-en/document/c02153181
But you could add more RAM motherboard.
As Danjen said, the addition of a new graphics card will require a new higher power PSU.
Tags: HP Desktops
Similar Questions
-
Windows 7 64 x computer with up-to-date Norton 360 crashes after the last critical update. I had to go back to a recovery point before the last installed update. I had Norton 360 for nine with no previous Windows Update problems
It seems to work after a reboot and a new attempt to update norton. First, it froze. I connect this because I heard that several win 7 64B machines at work had to be restored on 1/12 after a bad update. I don't know if they also had norton.
-
Hello
I worked with Labwindows CVI 2009 without problem, but after the upgrade to the 2010 version, I have the following problem:
When I m going to run the unistaller, Panel configuration Windows or directly from the icon uninst.exe, it doesn´t work. The PC thought for a few seconds and does nothing, and it happens with all applications that I build with Labwindows CVi 2010.
Thank you
Asier
Hello-
You install these distributions on a non-English system? If so, the first thing to try is the workaround solution listed on this known issue.
The known problem lists only the Italian OSs because inconvenient BONE, but in fact, it can happen on of many different non - English OSs. I will update the text accordingly the next time I update the list of known issues.
NickB
National Instruments
-
I bought photoshop CS6 extended as a student in 2012. I loaded it on two computers. A computer went belly up last week and I bought a new computer with Windows 10 on it. How to load the program on my new computer. I have the DVD disc. How can I got to talk to someone at Adobe? Don't they have any live support?
Hi wayneharder,
Use of the download link for Photoshop CS6 Extended below.
Download Adobe Creative Suite 6 applications
Once the application is downloaded and ready to install it, need you the serial number to activate it.
If you already have a copy of one of them, then it's fine, otherwise check out the link below to find your serial number registered.
Find the serial number of your Adobe product quickly
Kind regards
Mohit
-
Stuck with a log in window on XP system. Had a problem with the thugs, XP Security 2012. My administrator password is no longer accepted. (I wrote it and also have a safety question.)
How can I connect?
Hi Annaba-m,
Try the following.
Step 1: Try to start in safe mode. Check if you can login as administrator.
Step 2: If you are able to connect then try to change the password. Restart the computer in normal mode to see if you can connect.
-
A few days ago, I tried to upgrade Windows 7 Home Premium (64 bit) to Windows 10 using the free update. Installation hung at 84% for 2 hours, then restarted, was unable to recover the installation and then could not get back to Win 7. This left us with a black screen and a cursor of the mouse on the boot. The computer would remain in this State for about 10 minutes and then reboot and repeat.
Fortunately, or so I thought, I had a few CD Windows installation backup from the back to the era of digital river. So I thought I'd install fresh on my empty partition, copy my files and data, and then format the partition with the installation broken on.
I did, but now he tells me that my product key is not valid and cannot be activated. The product key came on a real label on the PC when we bought it.
The key is for X 16-96072. I installed X 17-58997 (Windows 7 Home Premium x 64 with SP1 (u)). I don't know what is the problem with the key? Should I have installed without the (u)?
One key 25 digits grouped in 5 sequences of 5 characters not X 17-58997.
To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop -http://go.microsoft.com/fwlink/?linkid=52012 )Once downloaded, run the tool.Click on the button continue, after a short time, continue button will change to a copy button.Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message. -
It seems that I can't use any upgrade of the time, because the key to upgrade is something different with the product key. I don't want to reinstall the whole system.
Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.
Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade -
I spent too much time trying to do. When I 'Browse' for printer, it does not work, I do not know "computer / / printer...» "I don't know how to find the 'URL '.
I have searched the HELP (?) with no results, in fact, when I search help and ask a very BASIC question, 15 possible solutions are listed, but no answer/solution to my question. I'm so frustrated! Can you help me please?
The following gives a step by step guide by using the tabs at the top. Some of the tabs have separate sections on the sharing of files and printers sharing then you may need to scroll down to find the printer on some of them part. Hope it helps: http://windows.microsoft.com/en-US/windows7/help/sharing-files-and-printers-with-different-versions-of-windows
-
Problem with opening programs of text and photos after the upgrade of computer for Windows 8
Original title: Photos open in Notepad
Hello
Laptop with win 8.
Recently upgraded XP to win8 with purchased MS DVD.
All text programs open graphics (pictures) in Irfanview & if I send them WORD show as hieroglyphics jeeperish.
And all the photos to open Notepad in hieroglyphs jeeperish but if I open them with "Sendto" Irfanview or MS photo editor pictures appear.
Seems the association went haywire. How can I fix this please?
8 win in my PC is not that. .. thanx... .Nick
Hi Nick,
Please contact Microsoft Community. I understand that you have a problem with opening the programs of text and pictures after the computer upgrade to Windows 8. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.
This problem could occur if the default applications are not set correctly.
I suggest you read the article that will help define the default applications that Windows automatically uses when you open a particular type of file, such as a song, film, photo or Web page.
Choose the apps Windows uses by default
http://Windows.Microsoft.com/en-us/Windows-8/choose-Programs-Windows-uses-defaultHope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.
-
I'm stuck on my computer with my admin account, but do not know the admin password
So I don't know exactly what happened, but my internet was not working so I changed something to a domain user. He said to make this change I have to restart my laptop, so I did it, but the user is Administrator and there is no other available users and I can not get on my laptop because I don't know my password. Help, please! would be well appreciated.
Thank you!
Hello
The Microsoft Community cannot help with password lost or forgotten by Microsoft Policy.
Keep secure passwords - Microsoft strategy on move the passwords
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37Microsoft's strategy concerning password lost or forgotten (KB189126) - has the help
http://support.Microsoft.com/kb/189126What to do if you forget your Windows password (Vista and Windows 7) doesn't help
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-passwordI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
my computer is locked
Hello
If you are using XP Home Edition, the built-in Administrator account probably doesn't have a defined password. You can start in safe mode, where this account will be selectable when connecting. It allows to connect and change the password of your normal connection.
To start in safe mode, keep hitting F8 twice a second after turning on the PC until you get the start menu where safe mode is selectable by the up/down arrow keys, and then press ENTER.
If you are using XP Professional, try to connect using the built-in Administrator account. You don't need to do it in safe mode (although you can if you wish). If your normal login screen is a display of the user symbol and hit ctrl-alt-del twice to get to login to text entry. Type administrator as the user name and try a blank password.
See also http://support.microsoft.com/kb/321305
Tricky
-
"Account: 'pop.gmail.com', server: 'pop.gmail.com', Protocol: POP3, server response: ' 220 mx.google.com ESMTP g31sm1842439rvb.50 ', Port: 465, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC90
'Test with live mail', account: 'pop.gmail.com', server: 'smtp.gmail.com', Protocol: SMTP, server response: ' + OK GPOP ready for 207.47.226.52 applications c20pf1733534rvf.8', Port: 995, secure (SSL): Yes, error number: 0x800CCC60
You seem to have transposed port numbers. According to The configuration Page of GMail, the POP service uses port 995 and the SMTP service uses port 465; your error messages show that you have 995 for SMTP and 465 set to POP, exactly behind what they should be
HAL
--
HAL Hostetler, TCE
Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
www.kvoa.com - KVOA television, Tucson, AZ.
Live Hot Licks - www.badnewsbluesband.com -
What I mean by don't have no ability, is that when I click on browse for a photo, one and only type/file format from the context menu of Windows Explorer is PDF.
What Miss me - is the ability to create an appearance customized for a digital ID a featy Pro
It is correct. Acrobat Reader can use PDF files.
-
How to install the new version?
It's not like you have purchased an upgrade to Photoshop. You say 5.5, which I suppose is CS5.5. Photoshop Elements is a watered version of Photoshop that is not an upgrade, unless you have earlier versions of the PSE and PE you don't have versions of qualifications required to use updates.
-
How is it that I can't sync my i pod on my new computer with windows 10
I have an ipod nano 7th generation I think and that you want to sync with my new computer with windows 10, I uninstalled I tunes and re-installed, I use the apple cables, I have tried all USB ports and so far nothing has worked.
I can't sync my i pod on my new computer with windows 10
Does this mean that the iPod is not appear in iTunes, so you can not synchronize? Or the iPod appears in iTunes, but it does not sync for some reason any?
Maybe you are looking for
-
file system on cRIO9014?
HI @ all I'm looking for info on the file system that works on my cRIO9014, the system includes the following components installed: LabVIEW time real 9.0.1 Web server for LabVIEW RT 2.0.0 Network Variable engine NOR-RIO 3.4.0 NI-VISA 4.6.2 NI-VISA 4.
-
When you run a system scan for errors or bad sectors on the hard drive it creates a log file
If so where is it stored Vista Home Premium
-
The code of unknown 43 for a port specific device on my computer laptop no matter what I plug into it, printer, USB key, etc.
-
How to check if the address pool is used by the vpn client
Hello world I need config anyconnect VPN on ASA existing who also owns the remote VPN client running. Under the ASDM when I click the address pools I see two address pools Pooldefault that I can see is used by vpn distance courses. PoolX - this subne
-
Original title: How can I get rid of used to install poping up upward Do you allow the folling program to make changes to this computer Microsoft (R) Antimalware package or not change when these notifivations appear he said iam using32, but I use 64