I had to reset my Mac to factory settings, and when I reinstalled from my Passport for Mac, my CS6 does not work properly.  I have my driver's license

Similar Questions

• My original opening on a new Mac Mini installation does not work. I have the series or available

  Opening 1 and implemented to date are installed on a MAC Pro: 2 x Dual-Core Intel Xeon 2.66 GHz. memory 5 GB

  Software: MAC OS X Lion 10.7.5.

  Now, I would like to install Aperture on a new Mac Mini: 2.6 GHz Intel Core i5. OS X: El Capitan.

  All the series nor are available.

  But the Mac Mini can't find software to install, even if the disk is in the drive.

  Need your help to tackle this problem.

  Thanks in advance

  Opening 1 does not work on El Capitan. You need minimum Aperture 3 and which is no longer sold. Time for a new plan.

• My Apple TV remote 3rd generation A1294 doesn't aluminum A1394 does not work properly, the battery is and I have tried all the resets including factory reset.

  My Apple TV remote 3rd generation A1294 aluminium does not work properly, battery is good, and I tried all the resets including factory reset. the battery compartment is clean.

  You don't say what you mean by not working not properly, however...

  Your Apple TV can become affiliated with another remote control. Hold the remote control close to and pointed on the Apple TV, press and hold the menu and rewind buttons together for 6 seconds or until you see an icon of the chain broken on screen.

• I had to restore my computer to factory settings and now I can't get on the internet

  I had to restore my computer to factory settings and now I can't go on the internet. I have Windows 7

  Hello

  When you perform a restore, you may need to reinstall the network drivers, etc..

  As you can not access the internet on the recovery computer, use the computer that you are on to get here to do this.

  Go to the website to make your computer > Driver and Software Support Section > find your computer model number > then your operating system > locate drivers Windows 7 > download and install the desktop > copy to flash drive > transfer onto the repaired computer.

  Driver downloads:

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

  ADVENT:

  http://www.adventcomputers.co.UK/product-downloads

  Alienware:

  http://support.Alienware.com/Support_Pages/Restricted_Pages/driver_downloads.aspx

  ASUS:

  http://www.ASUS.com/support

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  eMachines:

  http://www.eMachines.com/EC/en/us/content/drivers

  Fujitsu:

  http://www.Fujitsu.com/us/support/

  Gateway:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Lenovo:

  http://support.Lenovo.com/en_US/downloads/default.page#

  LG:

  http://www.LG.com/us/support/software-manuals

  Samsung:

  http://www.Samsung.com/us/support/downloads

  Sony Vaio:

  http://eSupport.Sony.com/Perl/select-System.pl?Director=driver

  Toshiba:

  http://support.Toshiba.com/drivers

  You can download all the drivers this way, or once you have network and/or pilots Wi - Fi installed get the rest downloaded directly to the repaired machine.

  See you soon.

• When I try to update creative cloud, I get a popup to connect, I get my Adobe password, but it does not work. I have reset my password and I tried again, but it still does not work.

  When I try to update creative cloud, I get a popup to connect, I get my Adobe password, but it does not work. I have reset my password and I tried again, but it still does not work.

  The password screen shake when you enter the password?
  If so, it asks your Mac password.

  Don't worry about file opm, Adobe recreates him when you try to connect.

• Firefox 10 for Mac - 11 installation does not work with Cooliris I have to install Firefox 10

  Firefox 10 for Mac - 11 installation does not work with Cooliris I have to install Firefox 10

  Double post please see also /questions/925441 #answer - 326583

• Touch Pad Mac Book Pro does not work since the 10.11.3 update

  My touch pad does not work since the update of El Capitan 10.11.3, y at - it nothing to do with this update or is this a hardware problem?

  Mouse Magic Mouse and USB work correctly

  Try SMC and NVRAM resets:

  https://support.Apple.com/en-us/HT201295

  https://support.Apple.com/en-us/HT204063

  If no success, make an appointment in an Apple store genius bar.  The assessment will be FREE.

  Ciao.

• I had to reset my iMac to factory settings, BUT now key CS4 will not work. The iMac is circa 2006. What can I do?

  my iMac need a reset to the factory settings. I reinstalled photoshop cs4, but my key gets a big fat Red Cross. I installed the trial so far

  Thank you - the support team helped me through a live chat. It's all sorted out

  Karen Collis

• Disable iMessage app (Mac) when I hit iMessages on iPhone (El Capitan - Notifications fix does not work)

  I think that this question is a little different from the others posted. I am not connected to iMessage on my phone. I think my MacBook is my Apple ID associated with it, but I've not logged in the App, and I already turned off all the boxes of banners/badges/alerts and unchecked everything in system preferences > Notifications menu.

  However, the question that I find annoying, everytime I go to iMessage on my iPhone application appears at the bottom of the screen on my Mac, even if I am not logged in. Exit iMessage on my iPhone and it disappears on my Mac. There is nothing in common with my Mac, but its boring whenever I'm Messaging on my iPhone application appears on my MacBook, and I watch my Mac to see whats moving on the screen but its just letting me know that I have the app open on my iPhone iMessage. Does anyone know how to disable this feature?

  I just want it to be completely gone and not follow when I open the iMessage app on my iPhone. Does anyone know how to do this?

  Thank you!

  Hi James b. Moore,.

  If I understand your question, whenever you use the Messages app on your iPhone, you will see it appear on your Mac and you do not want the application on your computer, right?

  Looks like you have the characteristics of continuity enabled on your Mac.  The resources below will explain how to disable features such as transfer to separate the activities of your Mac and iPhone.

  Continuity of use to connect your iPhone, iPad, iPod touch and Mac

  Transfer procedure

  With the transfer process, you can start a document by e-mail or message on a device and pick up where you left from another device. Transfer works with applications Apple such as Mail, Safari, maps, Messages, reminders, calendar, Contacts, Pages, Numbers and Keynote. Some third-party applications are also compatible.

  Disable the transfer procedure

  If you want to disable the transfer on your iPhone, iPad or iPod touch, go to settings > general > Handoff & suggested Apps. Can disable Handoff.

  On your Mac, go in system of preferences > General. Can uncheck the setting allow Handoff.

  With continuity, all SMS and MMS text messages that you send and receive on your iPhone may also appear on your Mac, iPad, and iPod touch. You can also meet your contacts from any device is closer to you, including your iPad or Mac.

  You can start a conversation in the Messages application or click on a phone number in Safari, Contacts, or calendar.

  Set up SMS and MMS with continuity

  1. You need to iOS 8 or later version on your device iOS and OS X Yosemite or later version on your Mac.
  2. Connect to the iMessage with the same Apple ID on your iPhone, your other iOS devicesand your Mac.
  3. On your iPhone, go to settings > Messages > Send and receive. Add a control to both your phone number and email address. Then go to settings > Messages > text Message Forwarding and turn on the device or devices that you want to transfer the messages.  (Disable this function if you want no messages will appear on your Mac.)
  4. Looking for a code on the Mac, iPad, or iPod touch that you enabled. Then enter this code to check on your iPhone.

  Take care

• Reset timer does not work properly.  Find the timer just always return null...?

  I'm trying to get the meter backwards and the Clear_Form when the timer expires. I'm trying to reset the timer when you move the mouse or type text in all fields (for those who use the tab keys to navigate through the page).
  
  I tried procedures for 'Create' and 'Remove' the timer, and it did not work.
  
  I tried the Set_timer integrated to 'reset' the timer instead of create and delete timers, and it didn't work either.
  
  
  
  I'm building a requests for a customer to enter their personal information at a kiosk in the lobby of the waiting room, before an appointment with a representative, which will save all your meeting time. The timer will be to erase the personal information when a client leaves just during the process.
  
  The timer keeps always just pulled over and over again, and I can't it stop/reset/create new timer when the mouse is moving etc... so he keeps almost touching news over and over again, which is not the desired effect.
  
  
  Could someone help me please? It seems like it should be a pretty basic function to the program, but I'm not find all messages about my question. I use Oracle 9i and 10g of form.

  Hello

  You do not have any code, so that it is difficult to guess what can be the problem. Remember that the timer name must be given capital letters in functions.

  François

• Help I had to reset my laptop to factory jobs and lost my PES 11

  I lost my photoshop elements 11 and want to re-download it! Where can I find it?

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 11:

  l http://prodesigntools.com/Photoshop-Elements-11-Direct-Download-Links-PSE-Premiere-pre.htm

• After internal reset PRAM and SMC microphone still does not work properly

  I've recently updated to el capitan. For the first time that I had to use the microphone internal, so I went to the system preference, the maximum capacity, the value clapped my hands, but the microphone reacts just as shown on the scale bar. So I reset the SMC first then the LANDAU and now it reacts a little more because I clap my hands, I want to tell the scale bar that detects the incoming sound shows like 5 spots (and there are 15 points). I tried to register and the sound of the recording is very low. Is this normal? What I need to fix my mac (3.06 GHz Intel Core 2 Duo, 4 GB of DDR3 memory a 1067 MHz, GB 999,35-909, 89 GB free)? Thanks for any response.

  Susan of morro bay , October 28, 2014 16:21
  in reply to Sirae87   Useful

  I cleaned the little tiny micro holes - and it worked:

  I also had a problem with my internal microphone. In system preferences > Sound > entry, I had the internal mic selected, and the entry level bar would show some activity when I typed in the top of the computer, but not when I spoke. So first of all, I had to figure out WHERE the microphone was actually and I googled and found this on top of my iMac - a very small circle of TINY holes, right in the Middle at the top of the screen. Turns out I have had covered with a decorative Angel, using a sealant that is usually used to stick things to the surfaces. I removed the little angel and PuTTY... but did not always receive my voice recording in the bar of entry-level in sound preferences. I used canned air to blow at the level of the tiny holes, but that did not help. Finally I found a brooch (thinking it was actually too thick, drill holes of small microphone) but I WAS able to push the small holes - so I poked each other - and voila - my internal microphone now work! Yay!

• My hotmail account, I had to always has been hacked and no matter what I'm trying to get back in does not work, I can call and talk to a live person by a number?

  My hotmail account, I've had forever has been blocked. I tried to implement everything. How to recover this account information?

  Hi LDarling,
   

  As you are facing this problem with Hotmail, your best bet of contact would be Hotmail Forums. Please post your request there you will find experts who handles problems with Hotmail in there.

• I bought Photoshop Elements in March 2014 and had to reinstall the Mavericks (Apple) yesterday. Now items does not work. Where can I download it again?

  I bought Photoshop Elements in March 2014. Yesterday, I had to reinstall the Mavericks (Apple).

  Now the elements no longer opens. Do I need to download the trial version again or how

  I have it to get back to work?

  You can check your Adobe account online to see if there is a link available for download of the application.  If it isn't there, you can download the trisl on the following link...

  http://www.Adobe.com/cfusion/TDRC/index.cfm?product=photoshop_elements

  for older versions:

  PES 10: 11 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html

  PSE 7, 8, 9 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-7-8-9-downloads.html

• I purchased online and downloaded the lightroom 5 for my mac, but it does not work.

  Hello

  I bought online the lightroom 5 for my Mac.

  I downloaded and installed, but when I open it I see a document read me with instructions. What should I do to be able to start using it?

  Thank you

  ALE

  Navigate to the directory with the installed files and click or double-click on lightroom.