I had Windows server 2008 with microsoft web apps 2010 and I am unable to install KB2553095 to (MS11-072)

Similar Questions

• I have a set of software for Windows Server 2008 with SP1 32-bit?

  My office is running: Windows Server 2008 with Service Pack 1 32-bit.

  AMD Athlon II 640 (Quad Core) 3.2 Ghz

  Installed memory: 3 GB RAM DDR2

  1 Gb integrated graphics.

  NOW!.

  My motherboard: DKA 790GX Platinum. Micro Star International.

  My hardware and everything would be compatible for the server operating system?

  audio device: installed

  Install: network (LAN) Interface Card,.

  Wireless NOTHING: installed.

  For assistance, please ask for help in the appropriate Microsoft TechNet Windows Server Forum.

  
  Thank you & good luck.

• P2V Windows Server 2008 with SP2

  I'm trying to P2V conversion and a windows Server 2008 with Service Pack 2.  I keep getting and error failed to get material etc..  Can someone please help me with this problem.  I can't understand this problem.

  Thank you

  The worker logs or logs of the agent is important, but you must disable UAC and log in with the administrator user local physical machine. HTH

• Is it better to use Windows Server 2008 with or without Hyper-V?

  There are two "families" of Windows Server 2008: with and without Hyper-V.

  I need to install a new Windows Server 2008 (x 64) in a new server machine.  So I was wondering that I should choose.  With or without Hyper-V?  Because in the future, I might want to install VMWare Server 2.  If there is Hyper-V, would there be a conflict?

  Use that WITH Hyper-V. Hyper-V is a role that you add after the installation. If you install one without, so you'll never have the ability to use Hyper-V on this machine, if you need. Please keep in mind that you cannot run virtual Hyper-V and VMware Server computers on the same host at the same time, as the previous poster said - you will see a pretty blue screen if you try

  Dimitri Rodis

  Integrita Systems LLC

  http://www.integritasystems.com

• Using Windows Server 2008 with After Effects as render slave?

  Hi guys,.

  We have a good number of servers running Windows Server 2008 64 bit.  We also wanted to use these boxes and wanted to know if it is possible to use them as slaves with After Effects rendering?  Anyone doing this?  We found nothing to a Windows Server 2008 system configuration.

  Thanks for everyone entered.

  Jason

  Here are the system requirements:

  http://www.Adobe.com/products/AfterEffects/systemreqs/

  "Microsoft Windows Vista Home Premium, Business, Ultimate, or enterprise with Service Pack 1 or Windows 7"

  Windows Server 2008 is not on this list.

• I have updates that are missing on Windows Server 2008, with 80248014 error.

  I have updates that fail on Windows Server 2008. Error 80248014 and here are a few updates failed install, KB955839 KB950050 KB952287 KB940157.

  Any information is appreciated!

  Thank you for your help in advance.

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb430837.aspx

  Windows Server 2008

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Server Forums link is above.

  Here is the Vista Forums.

  See you soon. Mick Murphy - Microsoft partner

• How can I get windows on windows server 2008 32-bit OS media player? It will not simply install...

  The Configuration of Windows Media Manager opens with a dialog box saying 'no windows Media Player updates for your computer are available for download and installation at the moment', but Windows Media Player is not installed... When you click on OK, then shut down the installation...

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:

  Windows Server 2008 R2
  
  http://TechNet.Microsoft.com/en-us/WindowsServer/bb310558.aspx

• 12 windows server comes with microsoft office 2010 or 2012?

  I need to have windows 2010 for one of my college classes and I only microsoft office 2007. If I update to windows server 12 it all that comes with?

  No, Microsoft Office is a product developed by Microsoft Corporation to buy. It does not come with Windows at all.

  Buy Microsoft Office suites 2013 and Office 365 subscriptions...

  Windows Server 2012 is an operating system for network used to manage large networks of computers, and provides services such as file and print, authentication, security, backup of client computers and Web sites host to name a few.

• Failed to configure windows server 2008 with a fixed IP address on VMware WS 9.0

  I have VMware Workstation 9.0 installed on my Windows 7 Ultimate on a Dell precision 4700. Intel I7 2.6 GZ (8 CPUs) and 16 GB.

  I have developed networks to open and

  Hi André,.

  I think that I thought about it.

  (1) in the virtual network Editor, I needed the jumpered to connect to the wireless card active network connection

  (2) I had a firewall problem

  Thanks for the help,

  Chris Schene

• I can't install vmware server on the same windows server 2008 with Hyper-V?

  I have a server as the active service of Hyper-V, but I want to virtualize a VMware ESXi, andnot with Hyper-V now like to install VMware Server.

  My doubt is: can install two virtualizadores on the same server?

  It is a virtualization server that I have in my environment.

  Thank you

  Diego Paiva.

  I don't know of anyway to run ESXi in hyper - you can do the reverse to install ESXi and then run Hyper-V as a virtual machine.

  As for your second question - if you ask you can install ESXi on top of Hyper-v - you can, but it will overwrite the Hyper-v Forum

• RDC 7.0 on Windows server 2008 upgrade

  My question is simple is a Windows Server 2008 with an engine of Vista and if so can I use the update to Vista for the upgrade to RDC 7.0 on Windows server 2008

  Please repost your question in the appropriate Windows Server forum: http://social.technet.microsoft.com/Forums/en/category/windowsserver ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I'm trying to set up authentication with SMTP on Windows Server 2008 Windows.

  Hi, try to configure windows with iis smtp authentication 6 on windows server 2008, I created the user account and put hin Group Access tab SMTP and iis, I chose windows authentication and tab delivery - out related security I also chose authentication window and walked to the user and writes the password but still does not

  original title: ii6 smtp problems

  Who is this "it"?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Problems to use Windows Server 2008 R2 64-bit on ESX 3.5 U3

  I am having some problems with Windows Server 2008 R2.

  I was charged with the creation of 2 new Windows Server 2008 R2 servers. We have ESX 3.5 Update3. I found that in my attempts to put an address static IP in the virtual machine, the system crashes. If I leave the adapter to DHCP, it seems to work longer, but this obviously doesn't work. Just to be in the IP menu type in IP (do not hit OK or apply again) will cause the console screen lock.

  I found that since the release of ESX 3.5 U4 notes:

  x 64 versions of Windows Vista and Windows Server 2008 operating systems require Microsoft hotfix

  x 64 versions of Windows Vista and Windows Server 2008 without Microsoft hotfix http://support.microsoft.com/kb/950772 operating systems have a situation where the guest operating system is not responding and returns the following error:

  MONITOR of PANIC: vcpu-3: SAY vmcore/vmm/cpu/segment.c:430

  I was not able to find the error code in my ESX systems, so I can't confirm that I see the same question. I moved the virtual machine of 4 different hosts in the same cluster with the same results.

  Here are the best true - I built the virtual machine from scratch and configured 2 GB RAM, 1vCPU and 40 GB slim HDD put into service. With no OS, I cloned this config for the 2nd of 2 servers that I need to install. I traced the two VM 2008 R2 ISO we have on our Image data store. Both installed at the same time. Given their Unique IP and Machine names and joined them in the field. Once that ended, I migrated my cluster Corp Server2 to my cluster off site for DR purposes. The only change in config is the VLAN on the remote cluster.

  The two systems worked very well. As I returned to server 1 to start install application - lock. Reboot, login and lock. This is where I started to move the virtual machine to other hosts of the local cluster. I have found no point in troubleshooting, I'll just clone server 2. I deleted the name of the Server1 computer. Off of Server2, cloned it more to the local cluster. I then started without the NIC on so I could change the name of the computer, IP and add to the domain. This seemed to go well, I have been brought back online and start installing the application. Until I'm at the point of launch the installer app - lock.

  2 on the remote cluster server works smoothly. I have validated the ESX host on all host versions to make sure I was in the same field of play on both sides - check. No other Server 2008 seems to have this problem.

  I will delete and rebuild 1 server from scratch, but I don't see how I can do a clean install of ISO any different for the same hardware and best results.

  I checked the link to the fix for MS, but article reference Server 2003...

  Is there something that I am on?

  Addendum:-I find it strange that although I have 2008 R2 installed, the drop down menu to comments what OS in VM config allows only to 2008 (64-bit) for the selection nearest you. If you look at the field Server guest operating system in a nutshell, it says that NT 4.0 is installed. Is this just a problem of display text with this version, or a cause for concern? I found everything all the R2 are displayed as NT4 in the Summary tab.

  Corrections - it seems Server2 locks as well at the opening of the Server Manager window - I can see the "collection of data...» "downstairs. I had also opened the work center & gt; Properties window on top of the Server Manager window. VM has ceased.

  Addendum - I found that R2 the boot safe mode with networking to adjust the TCP/IP offload to disabled results in a locked VM when in network properties.

  2008 R2 is not on the official list of guests supported, and others have reported problems with it as well.

  -KjB

  VMware vExpert

  Don't forget to leave some points for messages useful/correct.

• Difficult communication between Windows Server 2008 R2 and Windows Server 2008 R2

  I have a client-server application. The application server is installed (Jboss 4.2) on a computer that uses Windows 2003. The Jboss does not have Local system, but a user who has administrator rights. Among other features, this application communicates with other servers that use Windows Server 2008 R2, to find all the services of Jboss that are installed on these machines, their status, the databases that are connected to them, the ports (by checking the file jboss - service.xml, oracle - ds.xml). This communication is done by sending orders sc, as (and other controls to start and stop services):

  Status of request \\server SC = all | find/i 'jboss ' | find/i 'service_name ' | find/i "_q".

  My problem is that I have to migrate this application from Windows 2003 to Windows 2008 R2.  After I installed it on my new machine, I saw that the application is not behavies as it should. I managed to observe that the response time to send the same command (the one above) to Windows 2008 R2 to Windows 2008 R2 takes more time that sending the same command from Windows 2003 to Windows 2008 R2.

  Is something changed in the sc command or there's a problem with the security rights?

  If you have an idea, please give me a feedback.  This problem is beyond my knowledge.

  You can find server gurus in the following forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  This forum deals with domestic users of questions, so using Server forums you will get a much better response.

• Exchange 2007 on windows server 2008

  I work in the company, there is windows server 2008 with domain name, dns, dhcp is configured. now I want to install exchange 2007 in another windows 2008 Server, so please expose me to properly install and configuration...

  Hi Alavi,

  For more specialist on this question help, post your request here

  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************