Using Windows Server 2008 with After Effects as render slave?

Similar Questions

• Is it better to use Windows Server 2008 with or without Hyper-V?

  There are two "families" of Windows Server 2008: with and without Hyper-V.

  I need to install a new Windows Server 2008 (x 64) in a new server machine.  So I was wondering that I should choose.  With or without Hyper-V?  Because in the future, I might want to install VMWare Server 2.  If there is Hyper-V, would there be a conflict?

  Use that WITH Hyper-V. Hyper-V is a role that you add after the installation. If you install one without, so you'll never have the ability to use Hyper-V on this machine, if you need. Please keep in mind that you cannot run virtual Hyper-V and VMware Server computers on the same host at the same time, as the previous poster said - you will see a pretty blue screen if you try

  Dimitri Rodis

  Integrita Systems LLC

  http://www.integritasystems.com

• I had Windows server 2008 with microsoft web apps 2010 and I am unable to install KB2553095 to (MS11-072)

  I had Windows server 2008 with microsoft web apps 2010 and I am unable to install KB2553095. While trying to manually download and install its giving message "there are no products made by this package installed on your system", but I had windows web apps 2010 SP1 is installed on all my servers.

  Security bulletins:

  MS11-072

  Security bulletins:

  MS11-072

  Security Bulletin: MS11-072

  Hello

  Note that your computer is under domain, you must contact the TechNet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• I have a set of software for Windows Server 2008 with SP1 32-bit?

  My office is running: Windows Server 2008 with Service Pack 1 32-bit.

  AMD Athlon II 640 (Quad Core) 3.2 Ghz

  Installed memory: 3 GB RAM DDR2

  1 Gb integrated graphics.

  NOW!.

  My motherboard: DKA 790GX Platinum. Micro Star International.

  My hardware and everything would be compatible for the server operating system?

  audio device: installed

  Install: network (LAN) Interface Card,.

  Wireless NOTHING: installed.

  For assistance, please ask for help in the appropriate Microsoft TechNet Windows Server Forum.

  
  Thank you & good luck.

• P2V Windows Server 2008 with SP2

  I'm trying to P2V conversion and a windows Server 2008 with Service Pack 2.  I keep getting and error failed to get material etc..  Can someone please help me with this problem.  I can't understand this problem.

  Thank you

  The worker logs or logs of the agent is important, but you must disable UAC and log in with the administrator user local physical machine. HTH

• Windows Server 2008 R2 after trying to make a backup of Buffalo Linkstation no start

  A colleague logged the buffalo linkstation to our server and tried to save her. Something has gone wrong (the backup was not completed) and the server restarted. Now it starts (the scroll bar ends and after it I see the mouse cursor in the black screen) and after a few reboots seconds. I can't disable the auto restart after system failure in the bios (there is no such function). And this isn't a hardware problem (I connected the HDD on another machine and the result was the same).

  I tried fixboot, fixmbr, rebuildbcd comands in command prompt and they have all successfully completed, but the error still exists. Maybe someone has had this or a similar problem and knows the solution?   Thanks in advance!

  Hello

  Microsoft has specific Forums to help you with your Server 2008 R2 questions.

  Could you please repost this link in Server 2008 R2 Forums.

  "Support for Windows Server 2008 R2"

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  See you soon.

• Three companies using Windows Server 2008 Active Directory and physical locations?

  The research of three companies using Active Directory in Windows Server 2008 and also how many physical locations?

  Answers forum is addressing issues technical home user.

  If you don't have a technical question, you can try to use Bing to search for the information you are looking for.

  If you are having problems with Active Directory, you can create a new post on the TechNet forums for assistance.
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Problems to use Windows Server 2008 R2 64-bit on ESX 3.5 U3

  I am having some problems with Windows Server 2008 R2.

  I was charged with the creation of 2 new Windows Server 2008 R2 servers. We have ESX 3.5 Update3. I found that in my attempts to put an address static IP in the virtual machine, the system crashes. If I leave the adapter to DHCP, it seems to work longer, but this obviously doesn't work. Just to be in the IP menu type in IP (do not hit OK or apply again) will cause the console screen lock.

  I found that since the release of ESX 3.5 U4 notes:

  x 64 versions of Windows Vista and Windows Server 2008 operating systems require Microsoft hotfix

  x 64 versions of Windows Vista and Windows Server 2008 without Microsoft hotfix http://support.microsoft.com/kb/950772 operating systems have a situation where the guest operating system is not responding and returns the following error:

  MONITOR of PANIC: vcpu-3: SAY vmcore/vmm/cpu/segment.c:430

  I was not able to find the error code in my ESX systems, so I can't confirm that I see the same question. I moved the virtual machine of 4 different hosts in the same cluster with the same results.

  Here are the best true - I built the virtual machine from scratch and configured 2 GB RAM, 1vCPU and 40 GB slim HDD put into service. With no OS, I cloned this config for the 2nd of 2 servers that I need to install. I traced the two VM 2008 R2 ISO we have on our Image data store. Both installed at the same time. Given their Unique IP and Machine names and joined them in the field. Once that ended, I migrated my cluster Corp Server2 to my cluster off site for DR purposes. The only change in config is the VLAN on the remote cluster.

  The two systems worked very well. As I returned to server 1 to start install application - lock. Reboot, login and lock. This is where I started to move the virtual machine to other hosts of the local cluster. I have found no point in troubleshooting, I'll just clone server 2. I deleted the name of the Server1 computer. Off of Server2, cloned it more to the local cluster. I then started without the NIC on so I could change the name of the computer, IP and add to the domain. This seemed to go well, I have been brought back online and start installing the application. Until I'm at the point of launch the installer app - lock.

  2 on the remote cluster server works smoothly. I have validated the ESX host on all host versions to make sure I was in the same field of play on both sides - check. No other Server 2008 seems to have this problem.

  I will delete and rebuild 1 server from scratch, but I don't see how I can do a clean install of ISO any different for the same hardware and best results.

  I checked the link to the fix for MS, but article reference Server 2003...

  Is there something that I am on?

  Addendum:-I find it strange that although I have 2008 R2 installed, the drop down menu to comments what OS in VM config allows only to 2008 (64-bit) for the selection nearest you. If you look at the field Server guest operating system in a nutshell, it says that NT 4.0 is installed. Is this just a problem of display text with this version, or a cause for concern? I found everything all the R2 are displayed as NT4 in the Summary tab.

  Corrections - it seems Server2 locks as well at the opening of the Server Manager window - I can see the "collection of data...» "downstairs. I had also opened the work center & gt; Properties window on top of the Server Manager window. VM has ceased.

  Addendum - I found that R2 the boot safe mode with networking to adjust the TCP/IP offload to disabled results in a locked VM when in network properties.

  2008 R2 is not on the official list of guests supported, and others have reported problems with it as well.

  -KjB

  VMware vExpert

  Don't forget to leave some points for messages useful/correct.

• Unable to validate a way out of trust on either of the two domains using Windows Server 2008 R2

  I have two domain controllers in the two different forests.  Both have a Stub dns setup for each other and can ping both the field and the name of dc for eachother.  Domain1 build outgoing approval and validate successfully.  Domain2 see confidence applied, however any attempt to validate this trust or build from the Wizard ends with only 2 domain cannot locate the domain controller for Domain1.  What can be done to allow Domain2 validate this trust?

  Hello

  Microsoft has specific Forums to help you with your Server 2008 R2 questions.

  Could you please repost this link in Server 2008 R2 Forums.

  "Support for Windows Server 2008 R2"

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  See you soon.

• No blue screens SP1 Windows Server 2008 R2 after the deployment model

  Hi all

  I searched around forums and google to see if someone else has fallen on this, but I can't seem to find anything.  I have a 4.1 ESX 1 environment with vCenter 4.1 update 1

  I created a new system of Windows Server 2008 R2 and it patched for the last levels without SP1.  I cloned then it to a model.  When I deploy a server through this model with customizations (new SID), blue ect just system screens and goes in a reboot of the endess.  If I have the model with no customizations are deployed, it works fine.  It seems the new sid or something that's a waste.

  Any thoughts?

  Hello.

  Note: This discussion has been moved from the community of VMware ESX 4 on VMware vCenter Server community.

  There was a discussion there not too long ago which may help.

  Good luck!

• Can Hyperion - I use Windows Server 2008

  I install the Hyperion on Windows products, I read the http://www.oracle.com/technology/products/bi/hyperion-supported-platforms.html document and find that Windows 2003 SP1 is the version the most recent can be used as a server. Can I use Windows 2008 Server, in fact, the customer has installed Windows Server 2008, and asks me to install Hyperion product on the Windows Server 2008, I wonder the possibility. Before I do, I want to make sure if Windows 2008 Server is a supported operating system. Please, John advises and confirm, thanks a lot!
  Bob

  Windows Server 2008 is not supported. Oracle has not announced if/when they're going to support him; I hope they will, but don't know when.

  Tim Tow
  Applied OLAP, Inc.

• I have updates that are missing on Windows Server 2008, with 80248014 error.

  I have updates that fail on Windows Server 2008. Error 80248014 and here are a few updates failed install, KB955839 KB950050 KB952287 KB940157.

  Any information is appreciated!

  Thank you for your help in advance.

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb430837.aspx

  Windows Server 2008

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Server Forums link is above.

  Here is the Vista Forums.

  See you soon. Mick Murphy - Microsoft partner

• Need help with the design of a professional network and implement using Windows Server 2008.

  original title: CNS Capstone Project

  Network design and implementation. The project includes an important process of CCES in life cycle of the product as the collection of data and analysis, needs assessment, planning

  design, test strategy, documentation, etc. in fact build a network simulated by using existing equipment.

  The name of the firm co..   wide are network will connect all the sites with regional hubs. WAN will rely on a two-layer hierarchical model. locations

  LAX, DCA EGKK AND ZSPD all REGIONS will BE connect to san diego headquarters, composed of many disprate TCP/IP servers will be the only ro0uters of network protocols

  installed at each location basic WAN. Each building standardimplentaion active directory windows 2008 I re-branded, PROJECT MANAGEMENT how is that, I have a lot of project management books, but I need a Visual, I have a moment hard to read I'm more show me I learn hands on I went back to school and I am new to this can you help me graduating in March if I pass this capstone project.

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• I can't install vmware server on the same windows server 2008 with Hyper-V?

  I have a server as the active service of Hyper-V, but I want to virtualize a VMware ESXi, andnot with Hyper-V now like to install VMware Server.

  My doubt is: can install two virtualizadores on the same server?

  It is a virtualization server that I have in my environment.

  Thank you

  Diego Paiva.

  I don't know of anyway to run ESXi in hyper - you can do the reverse to install ESXi and then run Hyper-V as a virtual machine.

  As for your second question - if you ask you can install ESXi on top of Hyper-v - you can, but it will overwrite the Hyper-v Forum

• Failed to configure windows server 2008 with a fixed IP address on VMware WS 9.0

  I have VMware Workstation 9.0 installed on my Windows 7 Ultimate on a Dell precision 4700. Intel I7 2.6 GZ (8 CPUs) and 16 GB.

  I have developed networks to open and

  Hi André,.

  I think that I thought about it.

  (1) in the virtual network Editor, I needed the jumpered to connect to the wireless card active network connection

  (2) I had a firewall problem

  Thanks for the help,

  Chris Schene