I hate Windows 8. I learned that there is a way to withdraw and use a startup of Windows 7. Is this true?

Similar Questions

• My PC shows that there is someone else on my network with the same IP address. Could this be my Kindle Fire?

  I get the message on my computer that there is someone else on my network with the same IP address.  Could this be my Kindle Fire, that generated the message?

  In many cases, the ip addresses are assigned automatically by the router and if this is the case, something that can happen (happened to me) is that if several computers are attached (via wifi or ethernet or a combination of the two) and the router restarts while a computer is in sleep mode, when the router reboots it know that the computer sleeps is here and it can affect the ip address that has been already assigned to another computer.  When the computer sleep resumes usage it will trigger the dupicate ip address error.  In this case, you can just stop everything and restart.  The following discusses other causes and solutions: http://windows.microsoft.com/en-US/windows7/Get-help-with-There-is-an-IP-address-conflict-message

• Don't you know that there is a way to export through ASDM VPN?

  Dear all

  Don't you know that there is a way to export through ASDM VPN? There are a lot of VPN in our ASA. It would take considerable time to transfer the VPN one of an ASA to anther. I want to export the VPN configuration, and then import it to anther ASA. Anyone has any idea on this? Thank you

  Hello

  Please follow the thread for SSL VPN
  https://supportforums.Cisco.com/discussion/12562686/migration-AnyConnect-VPN-issues

  For IPSec VPN, you can manually copy the phase 1, phase 2 configuration from one device to another or copy the entire configuration and then truncate the redundant output.

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• Is this really the case with the free player, the clients can access is no longer a PDF to add comments and mark out? We have always used a PDF file for the reviews of books/documents, but now we hear customers that there is no way to add comments and ann

  Is this really the case with the free player, the clients can access is no longer a PDF to add comments and mark out? We have always used a PDF file for the reviews of books/documents, but now we hear customers that there is no way to add comments and annotation. Please let me know if this is the case, or if there is a solution

  '' If '' they use the free software Adobe Reader and "If" there is no security prevent this, he should be able to add comments.

  It'll be hard to say what's wrong without more details such as what exact version of the reader they use, they open the pdf file in a browser or in the player itself and what exactly happens when they try to add comments.

• Is there an easy way to copy and rename an entire project?

  I created a RoboHelp 10 project group with the Windows version of our software for bird watching.

  I need an exact copy that I can then edit and publish with the Mac version of our software.

  Is there an easy way to copy and rename an entire project?

  Hello

  Just open Windows Explorer to the location of your project. (Index, click on a topic in your project manager and choose the option to Explore)

  Copy the folder of the project by using Explorer and paste to create a new copy.

  In RoboHelp, open the copy, click file > rename project.

  See you soon... Rick

• I got a message offering a free update of Windows8 10 Windows. Is this true?

  Original title: is it a scam?

  I got a message offering a free update of Windows8 10 Windows. Is this true?

  If it's a message to appear in the lower right corner, giving you an opprotunity to reserve a copy of Windows 10, it is authentic. Users under license of Windows 7 SP1 and Windows 8.1 have to obtain Windows 10 for free.

• good when I have several pictures im by clicking between the spaces and the 2Installez them but theres a lot so I was wondering if there is a way to select and make snap toghter I looked online but no help

  good when I have several pictures im by clicking between the spaces and the 2Installez them but theres a lot so I was wondering if there is a way to select and make snap toghter I looked online but no help

  Yes, you can select a group of items in the project Panel, use of the PLC to the sequence option.

  Neil

• A message box you informed that there is a problem with DirectX and cannot start Command Conquer 3 &.

  Original title: problem with starting game.

  I'm trying to play Command Conquer 3 & on my computer but cannot start the game, whenever a message appears saying that there is a problem with DirectX.
  The game needs min. DirectX 9 c I have so I do not understand the problem. I have Nvidia Gforce2 mx installed Gr.card so it should play without...?

  The game is C & C 3: Tiberium Wars

  Help, please!

  Hi ChrisNiven,

  1 Windows operating system you are using?

  2 have you tried to update the Nvidia drivers?

  Method 1:

  Check if there are problems with the DirectX installed on the system. Use DXdiag to troubleshoot all direct X related issues. DxDiag ("DirectX Diagnostics") is a diagnostic tool to test the features of DirectX and the problems of video material - or sound-related.

  For more information, you can consult the following article:

  Diagnosing basic problems with DirectX

  Method 2:

  You can also consult the following thread link and try the steps to solve the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-gaming/command-and-conquer-on-a-Mac-with-Parallels-6-and/c737a45b-7c91-458A-AAC9-66bff80236d1

  You can see the following link support Nvidia to download the latest version of the drivers.

  NVIDIA driver downloads

  Hope this information is useful.

• When I try to install the upgrade of the software real player says I need, he says that there is no installed: 246 encoder and not enough disk space

  no installed: 246 encoder

  When I try to install the upgrade of the software real player says I need, it is said that there are no H 246 encoder installed and not enough disk space, even if I removed several programs releasing upward (I hope) a generous amount of disk space. I have a Toshiba satellite P105-S6124 2006.

  Hello

  ·         The question is limited only with Real Player?

  Method 1:

  You can try running Disk Cleanup in Windows XP, which will safely remove unused files from the computer and check if that tool:

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Method 2:

  You can try to install the latest codec pack from the Web site by using one of your favorite search engines and check if it helps:

  With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

  See also:

  http://www.Microsoft.com/download/en/details.aspx?ID=507

  Method 3:

  If the problem is specific to Real Player, you can try to uninstall ad reinstalling the program and check if it helps.

  How to change or Remove a program in Windows XP

• Everytime I open Photoshop elements V13, I get the message that there is an update V13.1 and Camera Raw 8.7.1. However when clicking on update now or after the release it will never update. There is also no updates listed for V13 on the Web site.

  Is this a false message, or is there an update available? If yes how do I update my version?

  Hello

  It is not a false message, these updates are available. (I covered the camera raw info here)

  

  If you load the editor, when you get told updates and you click Update, it may take a while to get there.

  If you are on a Windows system, you can find that there is a flashing icon of user access control in your taskbar. I don't know about MAC systems.

  Brian

• I received an email saying that my account has not been updated as a regular maintenance of Microsoft. Is this true? I'm afraid it's a scam that made use of the name of Microsoft to get my password.

  This is the email I received. Is it authentic?
  
  
  
  

  Dear owner,

  Our records indicate that your account has not been updated as part of our regular account maintenance. Due to the anonymous registration of free account we have seen mixes account and therefore blocking part of the account.  So you're Advisor to answer our customers with your account information for the update and ensure you are the real owner of this account.

  Do this by clicking on the button answer.

   

  * Full Name: ............................................................

  * User name: ..........................................................

  * Password: ............................................................

  * Date of Birth: .......................................................

  * Country or territory:...

  * Alternative email if applicable:...

  * Password: ............................................................

  This return is required for the update and to avoid the blocking of your account. If you do not respond to this message. you will lose your account permanently.

  Thank you for your usual cooperation. We apologize for the inconvenience.

  Sincerely,
  Service team members .

  This is a phishing scam. A modernized version of the present.

  Closing account Hotmail Phishing Scam
  http://www.Hoax-Slayer.com/Windows-Live-Hotmail-phishing-scam.shtml

• Is there a a way to "Consolidate all" using the FDM parallel batch Script?

  Hello
  
  When you run the BatchStdParallel script in FDM, the lngProcessLevel will take place in the consolidation, but it's only "consolidate" in HFM. I would like to know if there is a way instead "consolidate all With Data. Does anyone know if there is a way to do this?
  
  Here is the part of the script. Any help would be greatly appreciated,
  
  Dim BATCHENG
  Set BATCHENG = CreateObject ("upsWBatchLoaderDM.clsBatchLoader")
  BATCHENG.mInitialize API, SCRIPTENG
  
  ' Initialize variables Variables
  lngProcessLevel = 10 ' top consolidate
  strDelimiter = "_" ' delimiter in file name
  blnAutoMapCorrect = True ' automatic Correction of the card is on
  lngParallelProcessCount = 2 ' the number of parallel processes (must equal the number of processors)
  strLoadBalanceServerName = "MCK120" "server load for a parallel balance

  Check your settings for integration. The strengthening method is not specified by the batch script.

• Touchscreen is perhaps not as big they could hear... for indtance I learned that there is some time apps that you must then support specifically it wont open.

  MY iPhone 6s I received less than a month ago... If I'm on it... who im on it with apps etc... If I leave to go get the mail or even if I fall asleep... the screen fade never go out on its own... my phone will have a battery problem...

  Hi jackeugene,

  Thank you for using communities Support from Apple! I'm sorry to hear you're having problems with your new iPhone. If your iPhone is not sleep or turn off the display after sitting unused, you can check that your auto-lock settings (in settings > General > Auto-Lock) has not been set to never, as indicated in the next page of the User Guide:

  iPhone is locked automatically if you don't touch the screen for a minute or two. To adjust the calendar, go to settings > general > Auto-Lock.

  Sleep/wake button - iPhone

  See you soon

• Why my Firefox (old and new for these days!) has NO toolbars, top or bottom - he'll just in my home page and there is no way - I had to use Windows Explorer to send you this!

  When I open Firefox, it works to my page and host than EILLS screen - no. BARS at the top or bottom of the screen. I can't get anywhere! I have to Ctrl-alt-del out! If my e-mail, I click on something that connects to the Internet, the same thing happens - Firefox is at fault, not my home page.

  The first thing to try is to make sure that you are not using the full screen. Press F11.

• When I start the application, I get two messages at once. One tells me that there are two items updated level and the other told me that one of my clients has made some changes online on the Web site. Then I can do nothing more.

  Beste Forum,

  IK heb een groot met clean Muse.

  ALS ik het programma in existing Web open, squeeze ik twee meldingen een opstart you zien: of zegt dat er twee geupsamplede bestanden zijn eerste. Tweede dat er een online June has plaatsgevonden. Both add zijn then niet aan you will en het programma doet niets meer. @

  The message indicates that the published version of the site includes some changes that you can synchronize your file of Muse, is this synchronization after Muse crashes? It is with a specific file or any file?

  If you try to cancel the changes, you are able to open the site and work?

  Thank you

  Sanjit