I have 8 important windows updates. I tried to install 5 times. I get 646 or error codes, and it has a Try Again tab.

Similar Questions

• I keep trying to install vista sp1 but get an internal error code: 0v80070002. What can I do to fix this?

  I run MGADiag.exe but I still have the same problem. Thank you very much!

  Keith

  I run MGADiag.exe but I still have the same problem. Thank you very much!

  Keith

  Windows Update Error 80070002
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  Perhaps, you must manually download SP1 & SP2 and install even in a clean boot state:

  http://support.Microsoft.com/kb/929135
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  This would eliminate any interference from other programs, etc.

  Instructions for manual installation are included in the links below: -.

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

• Windows Update keeps trying to install K2686828 and KB2656369.

  Windows Update keeps trying to install K2686828 and KB2656369.  Whenever I tells me the installation succeeds only to ask again to update.  I tried the fix - it solutions, and they have not corrected the problem.  Also, I did a virus scan and found nothing.  All my other updates were installed without problem.

  This problem is related to the MSI registration information inconsistancies.  I was able to fix by using a cmd "msiexec /i {C09FB3CD-3D0C-3F2D-899A-6A1D67F2073F} ADDLOCAL = ALL/l * v % temp%\repairLog.txt.  At the end of this process, the two installed normally KB and I have now no critical updates in the meantime.  I noticed that article 917964 described a situation where IE would not work if the repairs were made the xp without removal of IE8 or IE 7 first.  My IE 8 works fine.  By 917964, "before you perform a repair of Windows XP installation, you must uninstall Windows Internet Explorer 7 or Windows Internet Explorer 8 of the Windows XP computer.". If you perform a repair of Windows XP installation, when a later version of Internet Explorer is still installed, Internet Explorer does not once the repair is complete. »

• How can I fix windows update agent 32-bit vista Windows Update agent 7.6.7600.256 keep for lack of 8007041D error code

  How can I fix windows update agent 32-bit vista Windows Update agent 7.6.7600.256 keep for lack of 8007041D error code

  Clean boot tried tried reboot fix he said componet needs to be repaired

  Please answer each of the following [admittedly tedious] diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

  1. when (date about) don't you buy the computer?

  2. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  3 a Norton or McAfee application ALREADY installed on the computer?

  4. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  5 are ALL the following updates listed in installed updates (not update history)? [1]

  (a) KB2705219, KB2712808, KB2744842 [KB2722913 or KB2719177 or KB2699988], KB2731847 [or KB2718523] and maybe KB2736233;

  (b) KB2698365, KB2691442, KB2655992 & KB2719985 [or maybe KB2721691];

  (c) KB2685939 and possibly KB2686833.

  (d) KB2658846, KB2659,262, KB2660649,562, KB2688338 & KB2690533 KB2676;

  (e) KB2393802 KB2644615, KB2633171, and especially KB971029.

  6. If Windows Vista Service Pack 2 is listed in the installed updates, when (the exact date) he was installed according to the history of the update (this time)? [2]

  7A. is the 7 Version of Java Update 7 (or higher) installed? TEST HERE in USING INTERNET EXPLORER (ONLY!)-online http://java.com/en/download/installed.jsp

  7 b. v11.4.402.278 is Adobe Flash Player (or higher) installed? TEST HERE in USING INTERNET EXPLORER (ONLY!)-online http://www.adobe.com/software/flash/about/7. Is Firefox, Chrome or any other alternative browser installed?

  8 is Firefox or another alternative browser installed in addition to Chrome?

  9 have you ever had the opportunity to do a repair installation or a clean installation of Windows?

  10. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. CCleaner Registry Cleaner)?

  ==================================================
  [1] start | Control Panel | Programs and features. See installed updates (in the left menu)

  [2] start | Control Panel | Windows Update | View the update history (in the left menu)

• For the third time, after re-installing Photoshop components 13, I tried to update, but every time I get the U44M1I200 error code that can help me?

  For the third time, after re-installing Photoshop components 13, I tried to update, but every time I get the U44M1I200 error code that can help me?

  U44... Update error http://forums.adobe.com/thread/1289956 can help

• Tried to install KB2447961. This failed with the error code 770.

  Tried to install KB2447961. This failed with the error code 770.

  http://support.Microsoft.com/kb/2447961

  How to get help and support for this security update

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  http://support.Microsoft.com/common/international.aspx?rdpath=4           

  North American customers can also obtain instant access to unlimited free support by email or unlimited individual chat by visiting the following Microsoft Web site:

  http://support.Microsoft.com/OAS/default.aspx?&PRID=7552           
  UTC/GMT is 19:27 Saturday, September 17, 2011

• Error 0 x 80070424 in Windows Update when trying to install the updates.

  Original title: in windows xp error 0 x 80070424.

  had downloaded antivirus system music next network.removed Center says this update is disabled when on that I'll update magazine, he says it is. When

  I go to windows update with what happens as soon as you start to express, as the bar moves as if it checks then that it cannot display the window

  error 0 x 80070424

  Hi williamjennings,

  Are which antivirus you referring?

  This problem occurs if a service that is required for Windows Update or Microsoft Update is not registered.

  You can follow this link and check if the problem persists.

  Error message when you use Microsoft Update or Windows Update Web sites to install updates: 0 x 80070424

  Hope the helps of information.
  Please post back and we do know.

• I'm having problems trying to watch a dvd, I get the C00D116A error code what can I do to solve the problem?

  I can't play a dvd I get an C00D116A error code.

  Hello

  C00D116A
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5230&ID=C00D116A&ContextId=10&OriginalID=C00D0FAA

  If XP, Vista, Windows 7 or Windows 8 error usually means that duty to update
  the video driver.

  Check with support of the manufacturer of the system (motherboard for custom systems manufacturer) updates
  the video device and/or the manufacturer of the real video device like ATI, Nvidia or Intel.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I can not install the Service Pack 1 update to my 64 bit Vista system. Get the 66A error code

  I tried several times to install the service pack 1 update on my Vista 64 bit system. It is always fails and gives me the error 66 has code. When I click on using this code I get nothing.

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Have no Microsoft Office installed, but Windows update keeps trying to install an "important security fix" for Office KB951944

  I recently bought a Dell Inspiron 1545 with Windows Vista Edition Home Premium 64bits. A trial version of office 2007 has been pre-installed, but I removed it. Because something was wrong with deleting automatically I followed the instructions of a Microsoft Office site to manually remove. Although I followed all the steps, I still think that Windows Update sniffs a bit of the program, cause he mind keeps me with the security patch. Anyone an idea how to get rid of it?

  Thank you!

  You can 'hide' any updates, but be aware that doing this cannot 'hide' all the new Office updates.

  How to hide updates in Vista: click on view available updates (or Select the updates installed). Right-click on the update you want to hide. Click hide update | Confirm the UAC (User Account Control) prompt, as appropriate.

  To restore/show updates for Vista: Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | Restore hidden updates: Find and select the update you want to install | Restoration of. You can now select once again it and install through the normal process.

  TIP: to avoid the downloading/installation, updates that you do not want to configure the automatic updates option second or third parameter in the Edit settings window. See picture here: http://www.microsoft.com/windows/downloads/windowsupdate/learn/windowsvista.mspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Not able to boot after that windows update, just trying to install the number 3 setting 3, and then restart the computer. With the help of Windows Vista SP2

  Friday morning I wasn't able to boot my computer more. When I start my computer it won't seek to set a parameter nr 3 of 3. And then it restarts again. My computer tried to install some windows update settings the day before with no success. I Don t remember what it was. I got Vista SP2

  The same problem happends to my computer from friends four days, after she start a windows update installation. But it has solved its problem by using the Windows installation CD and use the repair tool.

  For me, my Windows installation CD I got from Dell does not work. Not the tool repair or startreparation. And I have no reference system to return.

  What should I do? I don't want to reinstall windows again, I have a lot of information on the computer I need to.

  All the world has noticed this problem?

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the ISP above Mathods to solve your problems, save your data using one of the methods below, and then reinstall Windows:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Update keeps trying to install KB2656369 and KB2686828 over and over again

  My setting has been changed, the windows update has been downloaded and installed automatically. Now I have to turn off the computer for installation

  I continue to install both patches repeaedly: a security update for Microsoft Net Framework 2.0 on Windows Server 2003 and Windows X x 86 (KB2656369) and

  Updated security for Microsoft Net Framework 2.0 on Windows Server 2003 and Windows X 86 x (KB2686828))

  My setting has been changed, the windows update has been downloaded and installed automatically...

  If you mean the new V7.6.7600.256 WUA installed himself past week... you can change your settings to again to your panel of control-online Start > Control Panel > automatic updates.

  Regarding the .NET - repeat-... updates just hide them (don't show this update again) in WU, delete them (if they are already listed as installed), and then download and install manually.

  Or if not try > http://support.microsoft.com/kb/910339

  Confidence in assistance.

• Get the 0xc004f057 error code and that my copy of Windows is not genuine

  Hello Mr./Mrs,

  My real OS Window 7 Ultimate, after 12 months suddenly showed me (0xC004F057) notice that my copy is not genuine, and I have to validate, I tried but my desktop wallpaper went black, although the icons are always exposed.

  How can I fix the above.

  Baba.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) clearly explain your problem to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone
  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Im trying to installed the creative cloud but its says error code 82?

  error 82?

  Hi Juan,

  Please, try the following steps:

  • Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Reboot the computer.
  • Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

  Kind regards

  Sheena

• Unable to use wireless internet. In addition, my windows update will not be installed.

  Original title: extended error code = Oxfof4

  I have a couple of different symptoms. My laptop acts like it doesn't even have wireless capabilities although the exact model the same sitting next to her was a strong wireless signal (I still had internet capability on this laptop also). In addition, my windows update will not be installed.  I checked "Event Viewer" in system tools and have all sorts of errors. Error service Control Manager, "Warning b57w2k", code error Windows Update Agent and more. Still, the laptop doesn't move and accesses files, but no internet. I scanned with AVG and Malwarebytes 0 infection. Uugh!  Any suggestions?

  Many laptops have a switch that turns on or off the wireless radio.  This can be a physical switch somewhere on the laptop or a combination of the Fn key and one of the F keys.  Read the user manual for the laptop for more details.

  The warning includes "b57w2k" seems to be linked to a Broadcom NetXtreme 57xx Gigabit Controller (not wireless, wired).  You can click the copy (just below the up/down arrows) on the property sheet for the event and paste the content in your next post here.

  In general, the report that you have 'all kinds of errors' in Event Viewer is not very useful.  We do not understand what you're watching.