I have a canon mp250 and it dosent want to print.

Similar Questions

• I have microsoft scan software and a jet hp6500 office printer, scanner etc. How can I scan to a PDF file?

  I have microsoft scan software and a jet hp6500 office printer, scanner etc.  How can I scan to a PDF file?

  Hello Jim,

  I will suggest 2 things. First, go to hp.com site and select your device from the five listed here (http://www8.hp.com/us/en/support-drivers.html).

  Second suggestion is that you use the HP software to scan your document, where the native format is PDF.

  Let me know if this helps you.

  Kind regards

  BearPup

• I have discs for CS6 and do not want to join cloud. I'm already registered. Why do I get invited to enter the serial number?

  I have discs for CS6 and do not want to join cloud. I'm already registered. Why do I get invited to enter the serial number?

  Hi, Jeff. I just typed in my serial number and was able to open my applications.

  Thank you

  Anthony

• I have a Canon T3i and when I take pictures in auto mode, all my pictures look a bit washed out.

  If I put my camera in P mode, put the balance of whites in the setting "100", of "disorder" (even in the Sun) ISO Picture style 'landscape', my photos look better, have more color saturation, more to my taste.  Guess my question is, is it possible to make the settings in automatic mode, to achieve the results in my pictures that I receive when you use the Mode "P"?  It seems to be the same for all the goals that I use, although usually use my Canon 18-55mm kit lens.   I took samples of the same scene in a car, then P mode and the difference is dramatic.  Is it possible to change the default settings in Automatic Mode for this problem?  And if not, why Cannon would set the default settings for these poor results?

  Because I gave up on Auto a very long time for the same reasons that you are having problems I don't know whether or not they have improved how it works. IF you get better results in PROGRAM mode (which you can also refine to be of even better results) then I think that it works as expected. I THINK Canon should not give buyers a DSLR the Auto setting. More first-time buyers spend a lot of time to earn the money to buy their first DSLR & think they can ignore learn them to use by choosing the Auto Mode. For me, it's a foolish gesture. Spend 10% of the time that it took to earn money by reading the manual & practicing things, he tries to explain.

  Another thing that can help is to look at a few times

  http://www.canonoutsideofauto.ca/

• Scans registration in the wrong place! Epson Perfection V300 and 4990, scanners Canon MP250 and Windows 7

  I have a network of 4 computers using scanners Epson Perfection and Canon with a scanning interface that writes data to MS Access. Since we were forced to move to Win7, when we try to scan, the scanner tent to save files on the wrong drive, even if for the program .ini settings to specify a certain path (a drive shared on our main computer) and I also put the scanners to record on the same path on the shared computer. I work at a University and the tech here guys are stumped. We rotated scanners on compatibility XP service pack 2 and 3, and which seems to solve some problems, but certainly not more. Our scanning time is now much more time, as if there is a queue we expect and if someone else is written to disk, the second in the queue gets hunting their Doc local computer or desktop folder. Before winning 7 upgrades, we never had this problem. Some computers are brand new, others are a bit older. Any suggestions here?

  Finally we will migrate to a SQL format, but until we have completed the first phase of our project we stuck withAccess and this problem of scanning.

  Hello

  Thanks for posting your question on the Microsoft Community.

  I suggest you post this query on Microsoft TechNet community, and they will be able to provide you with the necessary assistance.

  Please visit the link below to find a community that will provide the support you want.

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?Forum=w7itpronetworking&filter=AllTypes&sort=lastpostdesc

  Keep ad queries about Windows on Microsoft Community, we will be happy to help you.

• I have an airport extreme and 2 airport expresses. my printer sees 3 networks alone vs. How to fix this?

  I have a relatively high House and have an airport extreme on one floor and 2 Airport Express - each on different floors.  My printer (Epson EF3640) considered the 3 networks all with the same name.  It seem to be printing problems if the computer is not on the same "network" as the printer. Any thoughts?  How airports that appear as a single network to the printer?

  Are all your base stations interconnected by Ethernet or wireless AirPort? Ideally for them all to be on the 'same' network you will want them connected by Ethernet and configured for a mobile network.

  Let us know if you want to continue this method and we can help you to help you with the installation.

• Installing photoshop on a second mac - I have a regular mac and now I want to install it on the macbook air. is this possible or do I have to make a new subscription?

  Well, see title... Thank you!!

  There is no "eternal" version  the longest (AFAIK) is one year.

  If you have a subscription, confirm your account reveals the subscriptions that you expect (and id adobe, used in the next step is the right) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

• Canon MP250 3 in 1, my scanner connected to my pc then at the same time my printer is not

  My scanner connected to my pc so that at the same time my printer is not... u can help me pleasei have a Canon MP250 3 in 1. It is connected by cable.

  My scanner connected to my pc so that at the same time my printer is not... u can help me pleasei have a Canon MP250 3 in 1. It is connected by cable.

  You must install the driver. Visit the Canon website to download and install the latest version of the driver.

• I have a new router and can not print?

  I have a new router and now you can't print from your device? No worries, there are a few suggestion you could do to solve this problem.

  The main step that you need to do is reconnect the printer to the network. Most printers have the SCW wireless on the front/touch panel. The same way you put in place previously, follow the same steps.

  After connecting the printer to the network, the computer will still have the old IP address and connections. So if you try to print something, it will send it to the old ports.

  UPDATE THE IP ADDRESS

  Find the IP address of the printer in the network wireless summary

  1. go to the computer

  2. click on Start Menu

  3 choose all PROGRAMS

  4. choose the HP folder

  5 Select your printer

  6. Select IP ADDRESS UPDATE

  Type the IP address on the printer.

  This will update all ports and communication between the printer and the computer.

  Another suggestion after you have reconnected the printer to the network (router), is to uninstall the software and re - install the software and drivers. Sometimes it is confusing for people to go through all programming to update the IP address and look on the printer. So it would be easy to uninstall and reinstall another step.

  Hope this helps, thanks.

• I have a Canon Pixma MX 880 and when I try to edit or delete photos on my SD card,

  I have a Canon Pixma MX 880 and when I try to edit or delete pictures on my SD card, I get the following error:

  "You must be authorized to perform this action" and below:

  'You need permission of the administrator of the computer to make changes to this file.

  Wireless printer is installed.

  I am registered as an administrator, do not have access to any user account.

  The old problem mounted HP Photosmart I replaced, I could change, remove, etc. without problems.

  Hi ehnco,

  It seems that the read/write on the printer attribute must be changed.  Use the following steps to change the read/write attribute:

  1. Make sure that the machine is turned on
  2. Press the Setup> button.
  3. Use of the the button to select [ device settings], then press the button.
     The device settings screen appears. 
  4. Use of the the button to select [device user settings], then press the button.

• I have a MacBook Pro and a Canon MX452. I have updated the OS on my MacBook at Yosemite 10.

  I own a Canon MX452 and a MacBook Pro (2010 model). This week I've updated the MacBook to Yosemite 10.10.3 operating system. Subsequently, I found the printer / scanner functions would not work. I have topped up the printer CD and was also invited to download drivers charge more on the Canon site, which I chose the ICA and the Canon IJ Network Tool V4.5.0 pilot V4.0.0 (don't know if they are good or not).

  I managed to get the printer works when you use the USB cable to the printer. I couldn't get the printer and the scanner works wireless. The light shows blue printer that is connected to my network ok. I also noticed my iPad and iPhone does not "see" the printer either.

  I deleted and re-charge the Canon software several times. I followed the instructions of Canon for:

  -Connect the MacBook to the router with a ethernet cable and go through the instructions to 'connect' the Canon MX452. But eventually, the MacBook says the Canon MX452 is 'offline' and I can only get it to work with the USB connection.

  Any guidance would be most appreciated me for:

  -get the printer and the scanner works wireless

  -get the Air-Print function works with the iPhone and iPad

  Thank you

  Stephen

  Hi John

  Five trys later, I finally got figured out. Thanks a lot for the link you provided. He helped me through the iterations until I finally got

  Best wishes

  Stephen

• I have a Canon 7 d Mark II and I'm using Lightroom version 5.7.1 on a Mac computer. My question is, I can't get attached to my computer. Lightroom and my computer recognizes my camera, but the connection did not last long and she also gets lost and then c

  I have a Canon 7 d Mark II and I'm using Lightroom version 5.7.1 on a Mac computer. My question is, I can't get attached to my computer. Lightroom and my computer recognizes my camera, but the connection did not last long and she also gets lost connected, then lost several times until the capture of attachment option is closed. I tired buy new cables, lightrooom and call Update to Canon support, but still nothing works for me please help?

  Hi Martin,

  In order to make shooting with the Canon 7 D Mark II captive, you need Lightroom 6 and higher.

  Please visit the following link: a list of cameras that can be attached to Lightroom.

  Kind regards

  Tanuj

• The video starts for a few seconds and stops.  I think it may have something to do with the corresponding settings?  I have a Canon HF 20.  The settings are 30 PF; MPX 24; Cine mode;. MTS; Cadence 29.97Computer (PC) has 16 GB of Ram. disk space. I have so

  The video starts for a few seconds and stops.  I think it may have something to do with the project settings match & camera.  I have a Canon HF 20. The settings are 30 PF; MPX 24; mode cinema; .mts;. 29.97 frame rate;.  Computer (PC) has 16 GB of Ram. Intel7 on video; 85 GB free space-free workplace.

  I tried changing the settings in the program, although I don't think that I'm doing it correctly.  Video plays perfectly in the canon software.  Any ideas? Thanks Steve

  Pf30 soul it records progressive, but puts it as interlaced on internal memory.

  Better is to implement a project of 30 p manually as elements are likely to be interpreted as 60i

  If so, you need to interpret all the clips in the assets of the project at 30 p.

  MXP mode means that it has been saved in 24 Mbit/s.

• Hi, I have a Canon iX6850 printer, but I can't print in color from photoshop. The prints are black and white? What should I do?

  Hi, I have a Canon iX6850 printer, but I can't print in color from photoshop. The prints are black and white? What should I do?

  Hi Vera,

  Thanks for the update.

  Make sure that the image is set to RGB in Photoshop.

  In addition, we suggest you follow the steps below:

  1. exit and then restart Photoshop

  2. go in the file menu > hover your mouse over Print > press and hold the space key

  3 try printing

  This would reset the printing preferences for Photoshop.

  Kind regards

  Claes

• I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  Hi soewandichan,

  Please make sure that Lightroom is far, i.e. Lightroom 5.7.1.

  Also, please copy the images from the card, and then paste them into a folder on the desktop and then try and import them into Lightroom.

  Kind regards

  Tanuj