I have a new router and can not print?
I have a new router and now you can't print from your device? No worries, there are a few suggestion you could do to solve this problem.
The main step that you need to do is reconnect the printer to the network. Most printers have the SCW wireless on the front/touch panel. The same way you put in place previously, follow the same steps.
After connecting the printer to the network, the computer will still have the old IP address and connections. So if you try to print something, it will send it to the old ports.
UPDATE THE IP ADDRESS
Find the IP address of the printer in the network wireless summary
1. go to the computer
2. click on Start Menu
3 choose all PROGRAMS
4. choose the HP folder
5 Select your printer
6. Select IP ADDRESS UPDATE
Type the IP address on the printer.
This will update all ports and communication between the printer and the computer.
Another suggestion after you have reconnected the printer to the network (router), is to uninstall the software and re - install the software and drivers. Sometimes it is confusing for people to go through all programming to update the IP address and look on the printer. So it would be easy to uninstall and reinstall another step.
Hope this helps, thanks.
Tags: HP Printers
Similar Questions
-
I installed a new router (Netgear R6220) and cannot figure out how to get the P1102w printer to recognize the new router. It shows the former name of the router (Belkin.833) on the test page and displays the IP address configured by AutoIP rather than DHCP as the old router does. The computer is a desktop Dell Dimenstion about 3 years and use Windows 7. The router connects to the computer to the Internet.
Help - How to make the printer recognize and communicate with the new router? (The original installation instructions don't seem to work for me.)
I made an update of the firmware a few months ago and the currtent datecode is 20130703. Allowed to print from my Samsung S2 Tablet through the router.
Here's what finally worked.
1 had to withdraw from old installation CD but Uninstall selected, so I completely shut down the computer. Guy at Best Buy said to "remove the device" but it was not enough.
2. download install the latest software from the HP download site and ran it. (http://ftp.hp.com/pub/softlib/software13/COL32431/bi-80329-11/hp_LJP1100_P1560_P1600_Full_Solution-v20120831-50157036_SMO.exe)
3 downloaded another file and ran it. (Setup_IP4, [192_168_1_5], [NPI073E2D] _it) Not sure where I found this one, but the software prompted me to run.
Finally, everything works and all devices are wireless printing
-
new router and can not connect wireless
Installed a new router that has changed my a WEP to a WPA2 security. I connected to the printer (7410) via ethernet cable and changed the security settings, but the printer will not connect to my router. I'm printing directly connected ethernet cable on the router. When I try to use the interface of the printer to cinnect to the router the only option that appears is WEP.
Any ideas?
Thanks it worked perfectly for me! Sorry, your options appear on the screen for you, but they did it for me.
Just make sure you change your new router wireless to the first WAP and it should work fine. No need to reinstall any software or drivers as some previous posts said.
Go to: network, Wireless Setup Assistant, (I had to scroll down to the second page to find where to enter my new network name) and enter the new network name configured on the router. I changed my network name of the WAP2 name that I had originally put in place, so it was easier to distinguish that one has on the WAP. Enter your WAP password and you should be good to go.
I use a wireless router Netgear on a Windows XP operating system.
-
My real question is Mozilla has a copy of my favorites? They have existed in a folder called imported from Firefox on my old CPU.
Better is to restore the JSON backup in the Bookmarks Manager.
- Bookmarks > show all bookmarks > import and backup > restore
You can save current bookmarks to an HTML file and import this backup after you restore the backup JSON as who will replace all current bookmarks.
It is possible to unpack the JSON backup, but you'd still have to restore that backup to get the bookmarks in the Bookmarks Manager.- [1071533/questions/1071533] Is there a way to convert the compressed files jsonlz4 in json?
-
I have a new router and the computer windows 7 If using WAP wireless encriptación. I also want to use my old laptop which has XP then does not connect. I was told by the router (Belkin) manufacturer support there is a MS download XP patch so it will connect to my new wireless network. Where can I get it and what it is labeled?
original title: wap encriptaciónHello
Maybe this can help.
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=3914
-
I have Adobe Acrobat XI and can not know how to draw a line. I need to redline some documents but can not. Does version XI even not this feature?
Yes, Acrobat Pro XI and standard have this ability.
There is the comment > Annotations > online tool.
There is the comment > Annotations > tool bar.In the Properties dialog box for one, you can select a desired color (i.e. red).
So, in properties, you can check a choice to make this the default value of the tool.Basically, all versions of Acrobat (including the new "DC") offer this feature.
If you work with a scanned image that has been placed in the PDF don't forget to use the OCR to get an output of a 'real' text - Acrobat provides a feature of OCR.
Be well...
-
I have msn live hotmail and can not see videos sent email me all of a sudden
I used to be able to see videos by e-mail sent to me, and now I can't, it just says loading in my temp folder and does not open? What can I do to fix this?
I have msn live hotmail and can not see videos sent email me all of a sudden
Hello SuzettePool,
Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows Live Messenger and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:
-
I have adobe reader xi and can not find the "create button" in order to combine several files into a single pdf
Hello
Reader is software to view PDF' only.
You must either a pack PDF to perform the function of thin or Acrobat.
Reader is not the software to perform editing functions.
Concerning
Sukrit diallo
-
(1) we went to DirecTV. Then the same day, our internet computer is down. I asked our current provider, Suddenlink, to let them know we had them to another - but we wanted to keep for the internet.
(2) called DirecTV to investigate why our internet went down at the same time they installed? They said that they did nothing to cause that. We waited 5 days to make out and also install the third TV that was promised. The second tech gave things a lookover and said, once again, that there is nothing unusual during their passage to cause the problem.
(3) called Suddenlink. They said it was the router. Called the people of Netgear. They said that the router was too old. We needed to pay an exorbitant sum for support and when I told him I'd rather just buy a new router and get free technical support for 90 days... and I personally do not have the credit cards in that time. (it's my mother s equip and I wonder it for the computer) when the guy told me that he could help and hung up on us, even though I was pleading for him to wait until I put my mother on the phone. (I'm in my 40s... not a kid).
(4) Suddenlink called a few days later, when we got a new router (netgear brand NO!) Installed and I noticed that the 'ready' light was not 'on' on the modem. Their technology has said that he would check and call us in a few minutes. He did not.
(5) the next day I called Suddenlink AGAIN. This time, I got a really nice customer service agent. She said she would send someone to check on it. It turns out that they had disconnected when I had called to pass only the TV.
(6) in any case, we are finally online... only now... I can't the printer to work. :-( This has worked before. Could it be caused by the different router? I don't know about these things. I didn't even know what it was until someone at Radio Shack has explained to me. (I was not about to buy one at Wal-Mart - these poor people). The printer is a Canon Pixma MX340. We love him. The only thing is that it is difficult to clear the tasks or to reset. The only way to really do that is to simply pull the plug, unfortunately and restart the computer. But hey, it's a great printer, better than HP.
We are under vista. The router is a Linksys wifi (which we have) N300 model E900.
Of course I appreciate any help you can give. God bless you!
Michelle and Ruth.
Hello
Thanks for posting in the Microsoft Community.
I understand that you are facing problems with the printer in Windows Vista.
I imagine the inconvenience that you are experiencing. I will definitely help you with this.
Please follow the steps in the link.
Solve printer problems
-
MSN Games - new computer and can not get these loaded games.
Always gives instructions to finally allow ActiveX, but does not help. Any suggestions? Very frustrating. Big heart fan and can not play.
Well, usually the first time you play a game MSN, a pop-up appears to ask for permission to run a plugin. If you click on allow, the game should work fine (assuming that you have an administrator account). Otherwise, try to reinstall the software.
I hope this helps. -
Look guys, I've been a good customer of yours over many, many years. OK I am a private citizen & not worth millions to you but I've been a good customer of your for many years of mny. I have CS 3 design and can't turn it off because the program won't let me ' cos of a system error. I need help, but I don't get it! Talked with your technical staff who told me that they onl deal with CC matters. I tried to use your tips online and support without success! 24 / / 7 chat support is not available, so I appeal to you directly off my CS 3 Design so I can use all the programs on the Vista platform. As a citizen in my mind, I've spent a lot of money on your please help me here if for no other reason than for moral and ethical reasons over the years. I think that you have a duty of care, you take my money and fail to support me! Best regards, Iain Hirst.
Please see:
Learn how to enable or disable Adobe applications.
https://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-help.html
I hope this helps.
Concerning
Megha Rawat
-
What should I do to get the router to recognize the new router
It's working now. I deleted my printer, downloaded the software from HP and added the new printer. Followed the instructions and it is running. Thank you
-
New switch and can not download IOS
Hi all
I just bought a new DS-C9124-K9 Cisco switch and there is no OS on it, when I go to download the operating system I get an error saying"
Required service contract To download this software, you must have a valid contract associated with your Cisco.com profile. If you do not have a service contract you can get one through: - Your team if you have a purchase contract direct with Cisco Cisco
- Your Cisco partner or reseller
Once you have the service contract, you must associate your service agreement with your Cisco.com user ID with the Profile Manager "
How can I fix this to get my ass expensive switch work XD
AH, I forgot the problem. in any case you need cisco smartnet account or valid service contract are necessary for most items to download on the cisco Web site. If you don't you should contact your Cisco team account if you have a Direct purchasing agreement or contact a Cisco partner or reseller to purchase a service contract.
Concerning
-
BOUGHT A NEW COMPUTER AND CAN NOT GET ON INTERNET
Windows 8 and Verizon DSL Westell Modem anyone someone please help! Just bought a new computer and unable to access the internet.
Hello
Is it wireless or wired modem?
I use one of them at the moment, and all I had to do with my new computer it is branch...
The modem has already been activated from a previous computer, however.
If it's a combo of wireless\wired modem... 7100 or something like that, try using a wired connection instead of wireless to start... I use a 6100 model that is a bit old, so it may be different from yours.
If it's the new Verizon service and the modem has never been activated, you will need to call Verizon and ask them to guide you through the installation process. It is a thing of the time. Subsequently, you can plug another\more machines without going through the process again.
An exception might be if you were to use a paperclip to press the Reset button on the modem...
If you use a wireless connection, there is most likely a password that you must use the wireless capability... You may need to contact Verizon for this also if you do not remember how to set up.
-
Got a new computer and can not copy the catalog on my USB key.
I have a new Dell laptop and have downloaded Lightroom to my new computer. I tried my backup from my old computer catalog and he said: "the process cannot access the file because another process has locked a portion of the file. I already tried to delete the lrcat.lock file as Adobe said to do and it did not work. I have no idea what to do! Help, please!
Close LR. Open Windows Explorer (Windows File Manager), or on the link for computer workstation work, Documents, or any other link that will open the Windows File Manager.
Copy the LR catalog file which is normally located in a subfolder of your user account on the USB drive. Then copy it to your new computer, place it in the same WAY as it comes. You must also copy all your image files or if they are all on a disk external drive connect this external drive to your new computer. If all your images are on your internal drive and then when you copy them on they must also reside in the same WAY that they were on your old computer.
Maybe you are looking for
-
I'll always be able to run the opening after upgrade to El Capitan?
I want to install Office 2016 on my MacBook Pro which is running 10.9.5 - it asks me to upgrade to El Capitan. I'm afraid that Aperture will not work more.
-
Fingerprint utility - where do I store data?
Hello I don't have a problem with my toshiba Notebook but I have a question for understandig better how the fingerprintutility works Why: In addition to the win7 preinstalled, I installed win8.1. on my laptop (and for some win10 zp also Tests) As I t
-
Dynabook: How to enter the BIOS settings?
I have a CRC Dynabook V2/470. How can I get into the BIOSsettings on this laptop?
-
TestStand report indicates a value of passage as a failure
I came across a possible bug I want to put some feed on. Attached is a sequence and VI that when run in test USE of all other iterations for the step values (i.e. next USE) the result will be maintained from the last USE and it will appear in the re
-
New folder in Windows Explorer is not visible until I press refresh
Hello! If I create a new folder in Windows Explorer to a network drive (which is a DFS share) under Windows 7 Professional 32 bit, the new folder is not visible until I have press F5 (refresh). Is there a fix or a solution to this problem? Thank you