automate restore usb

Similar Questions

• System Restore create not automatic restore points

  I recently posted a related problem, which has been repaired/fixed, see http://h30434.www3.hp.com/t5/Operating-systems-and-software/System-Restore-does-not-retain-restore-p...

  My HP Pavilion DV6 is not creating Automatic restore points.  Laptop is ~ 3 months and is using Windows 7.   In my previous post, I had trouble with the restore points disappear.  This problem has been fixed when I corrected a number of bad sectors on my hard drive. Now, I can manually create restore points and they remain intact.  Manual of several points have been in place for a few weeks.  However, I don't get the automatic restore points.  I checked the Task Scheduler, it has listed the restoration of the system, the Task Scheduler Service is started and set to automatic.  I put triggers restore to create a restore point 02:00 every day and start the system.  Whenever I have check the properties of SR within the Task Scheduler window, it lists today and said that "the operation completed successfully (0x0).  However, no restore point is created.  I can't find any errors listed in the event where the viewer associated with the restoration of the system, kind of most prospects, it seems that the Restore Points should be created, but there is no list but the manual I did myself. I've set the conditions of restoration as follows: 1) start the task only if the computer is idle for 10 minutes. (2) wait for idle for 10 minutes. (3) wake the computer to run the task.  System Restore has 15% of disk space for storing points, so there is plenty of room.  Interestingly, on the properties of SR tab listed 'History', says ' story (disabled), so there is nothing listed there.»

  I must be missing something - any ideas?

  Last updated: the scenario and the procedure of johngalt I linked above works like a charm.  I'm daily Restore Points just like I want.  In the cases where I decide I want to only a couple of a week, I can easily change the new task at the request I created, so I don't plan to post further.   Question is resolved :-)  Thanks for the help!

• Location of automatic restore Points?

  Can someone tell me where the automatic restore points are stored on XP & Windows 7? I know that if I put a manually restore point, I define the location.

  "" Windows XP "Backup or Restore Wizard" aka ntbackup.exe is intended to back up (for example, to create copies of) various ' files and settings "on your computer.

  • One option is the backup directory your "My Documents", your "Favorites" in Internet Explorer and your IE cookies.
  • Or you can save these points for all users on the computer.
  • Or you can save 'everything' to create a 'System Restore disk '.
  • Or you can select some files or directories to back up.

  NTbackup has several limitations, including least are that it uses a proprietary format and will not optical media backup.  Microsoft changed Ntbackup for the "Windows Backup and Restore Center" in Vista and Windows 7.  Unfortunately, the backup and restore of Vista has not read bkf files created by NTbackup in XP.  As you can imagine, there was a significant negative reaction to this, and Microsoft has finally provided a utility NTBackup restoration for Windows Vista and later OS that can read (but not create) the bkf files.

  Although NTbackup is free and a part of Windows XP, many people choose to use another backup utility.  Personally, I prefer the applications of cloning and disk imaging, like Acronis True Image Home and Paragon Drive Backup Casper 4.

  System Restore is not the same thing as NTBackup.  System Restore saves the registry of Windows and some specific system and application files.  It does NOT record the data of the user, such as documents, music, etc.  System Restore automatically creates a point of food every 24 hours (if the computer is on), as well as in front of some critical updates.  In addition, the user can create a restore system at any time point.  Here's a pretty good description of what system restore (the rest of the site is a very good resource for dealing with issues related to the SR): http://bertk.mvps.org/html/description.html

• Installation hangs at the backup data when reinstalling Win8 recovery Dell & restore USB

  I need to clean and reinstall Windows 8.1 because the administrator password has been lost, no password recovery disk is available and that newspapers now only machine in the guest account and you can't run the Dell recovery and restore from a guest account without login as administrator
   
  We have no data that needs backup machine is assigned to a new person in the company and we don't need all the programs installed, so we bought the Dell OS recovery and restore USB of the machine with the conviction that it would restore the first day.
   
  I was informed that the version of Windows that will be restored is 8.0 and then require the upgrade again after... no problem
   
  Unfortunately, the recovery process insists on performing a data backup in order to restore it later...
   
  -If I shut down the PC when you are connected as a guest before execution of the USB OS recovery, when it comes to the implementation of backup and migration, it will on the desktop and does nothing
   
  -If I log in on the comments before you stop, he is in recovery USB OS with "Initialize Backup and Migration" screen "Please wait" and Rotary processing icon
   
  I waited for expected two hours after the two meanings, and no apparent progress had so force stop.
   
  All tests up to this point find no error... Well, there is no, we do not have the admin password only!
   
  It is not an option to skip the backup and go directly to the restoration
   
  Any advice on the conduct of a pure install?
   
  Thank you very much
  Chris

  I suggest good to wipe your system:

  http://dellwindowsreinstallationguide.com/securely-wipe-your-hard-drive-with-dariks-boot-and-Nuke-DBAN/

  Download the new Windows with update 1 a.ISO 8.1:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-retail-and-OEM-ISO/

  This works with your OEM license, see a clean install of Windows for more details:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/a-clean-install-of-Windows-8-1/

  This will take you through the installation of Windows 8.1, its pilots and make a recovery of the own partition install using Dell backup and restore.

• need inputNumberSpinbox af to automatically restore the max value if the limit superior.

  Hello

  I have an inputNumberSpinbox which has an upper limit as 2147483647. So when I manually enter a value greater than 2147483647, the inputNumberSpinbox needs automatically restore the value 2147483647. I use Jdev 11.1.1.7.  Please let me know haw, this can be achieved.

  Kind regards

  Marie Antoinette

  You can use the technique used below post. Just replace the null with a maximum control and change the value to 0 to null at your maximum range value by default.

  Luc Bors Weblog: ADF 11g inputNumberSpinbox: change when the value is Null

  Thank you

• How to automatically restore the session after a crash/update / without asking me if I want to restore it?

  Hello, there are times that my Firefox crashes (well, it happens to all of us who use it to some extent) or updates asking to restart. I would like to know if there is an option that allows you to restore the previous session automatically without asking me even. It would be very useful for reasons. I had this kind of problem a couple of times ending me be upset. Sometimes I misclicked and lost all my important tabs. Other times my firefox has crashed/shifted on after reboot and guess what sound restart still has not even asking me if I wanted to restore my session crashed.

  Thank you in advance.

  Cesarius Hi, I think I understand, but I have not explained completely.

  The browser.sessionstore.max_resumed_crashes preference is to avoid an infinite loop. The default value 1 means an attempt to restore the session automatically once and if it fails (for example, it crashes before it can finish to restore), then display the "embarrassing". You could try to increase the value of 2 or 3 and see if it works on the second or third time. If you still see the screen "This is awkward" after a crash, Firefox still does not make a failback.

  You can also check if there is a file user.js in your profile folder. A user.js file is a file of optional parameters that Firefox reads at startup and uses to override the settings saved in your previous session. Unless you create a user.js file yourself, you can usually just remove it. This article includes a section on the hunt for a possible user.js file: How to fix preferences that will not save.

  Note: by default, Windows hides the .js file extension. Precise work with file names, I suggest setting windows to show all file extensions. This article has the steps: https://www.mozilla.org/firefox/all/

• How to program using the Task Manager automatic restore Points?

  
  

  Hello

  Restore points are created automatically every day, and just before the events significant system, such as installing a program or device driver. There is no need for schedule you a task for her through Task Scheduler. However, you can also create a manually restore point.

  1. Go to control panel of control-> system and maintenance-> system

  2. In the left pane, click System Protection. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Click the System Protection tab and then click on create.

  4. In the System Protection dialog box, type a description, and then click on create.

  Hope this helps

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I want to automatically restore the tabs, windows and when I reopen it firefox

  Previously, when I left firefox all tabs and windows would open next time in re-opening firefox - no more than 31.0

  How can I set current so it would be my fault?

  You can check the startup parameter:

  • Firefox > Preferences > General > startup: "When Firefox starts": "show my windows and tabs from last time '.

  Make sure you close the Firefox application windows that you want to restore are still open.
  If you close windows open and let the menu bar then you will need to restore windows/tabs open via the history menu or via the button on the topic: homepage.

• Is it possible to stop the firefox to automatically restore all my tabs after accident?

  Every time my computer crashes or I have to force quit firefox, the next time that I open it, it will immediately try to open all the tabs I had open previously, causing the major slowdown and memory hogging. I have to force stop again for it to appear the normal restore tabs dialog box. Is it possible to avoid this?

  Set the browser.sessionstore.max_resumed_crashes pref to 0 on the about: config to get page the on: sessionrestore page immediately with the first reboot after a failure has occurred or the Task Manager was used for the closing of Firefox.

  • http://KB.mozillazine.org/browser.sessionstore.max_resumed_crashes

  Which allows to deselect the tabs that you do not want to reopen, but will reopen the other tabs.

  See:

  • http://KB.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
  • http://KB.mozillazine.org/browser.sessionstore.max_resumed_crashes

  See also:

  • https://wiki.Mozilla.org/Session_Restore#preferences

• When I run the system restore, it uninstalls automatically restoring the system overnight

  Something must be set to uninstall System Restore.  How to disable this option?

  If you are dual-booting with XP, which is the cause of your problem.

  XP will remove Vista Restore Points.

  See you soon. Mick Murphy - Microsoft partner

• How to prevent an easy run automatically on USB transfer

  Hold on!  Never mind. I have disconnected/reconnected inside and now everything is fine.

  initial question:
  I used my usb key to move some files with Easy Transfer. Now, whenever I open the mem stick in doubleclicking Explorer, he tries to run Easy Transfer. I deleted the shortcut to the file transfer, Windows Easy Transfer file and the autorun from the memory stick file.
  I can't find anything relevant on the other to stop this.

  Hi alohamorgan,
   
  Good to know that the problem has been resolved. Write us for any other question in the future.

• Restore usb

  trying to ussb port files

  trying to ussb port files

  can help

  go to Device Manager-open-click on usb controllers - look for the yellow mark, means not working - click it to open and click the driver update.

• Windows XP NOT automatically reinstall USB controllers after restart.

  I am running windows XP. My computer stopped grateful plug-and-play hardware connected via USB and asked drivers to be installed. I tried with the software that came with them (a mouse and a keyboard, and a flash player), but it does not work either.

  So, following the instructions of a forum, I uninstalled the USB controllers. After restarting the computer, the controllers were not resettled and windows keeps looking, without success, drivers for the "new hardware", or controllers that it has detected.

  Thank you in advance for any help offered!

  You have posted a question of Windows XP to a group of Vista?

  USB support / drivers are installed with your hardware chipset driver, although maybe an internal cable made lose (assuming that you have a desktop computer)

• HP 7515 constantly disconnects, does not automatically restore to wifi

  Hello

  I bought the Photosmart 7515 so I could print from downstairs on my laptop. I absolutely tried everything to get this printer to remain on and connected to the network, but whenever I want to print something, I have to go upstairs, enter my network password and plug it in again. He remains connected sometimes for hours, days or twice, but always ends up falling and not to reestablish the connection.

  I am at the end of my rope and am about to return the printer. It is not a time saver, it's a giant problem.

  I have:

  Re-configured my whole router, reset my router, reset and re-configured my router

  Went through all the settings of the printer

  Tried the HP Diagnostic tools for my printer and network

  My printer to assign a static IP address out of reach of other

  Went back from static IP to DHCP

  I'm an addict of PC and network, and I am in the US Army Signal body. I live and breathe networking, but a device that does not record the passwords and restored ignored connections is more complicated that I am ready to face to is there a solution which does not require me to buy another printer that has the good sense to save configs?

  How is the intensity of the signal to the printer (printed a Test wireless network at the front of the printer)?

  Try changing the channel 2.4 GHz 11 (Yes, I know it makes no sense, but it works).

• VCenter automatically restores the SQL DB connectivity after interruption?

  We run vCenter 4.1 on WIndows 2008 R2. vCenter uses a separate server running SQL2008 database.

  The database server recently had interview and restarted. I guess it was down for 5-10 minutes at most. After SQL server has been for some time, I was still unable to connect and was forced to restart the vCenter server to restore connectivity. This has happened both production vCenter (physical server) and the vCenter lab (VM). Both use the same external SQL Server.

  If it's normal, I'll just add a pre - req for the vCenter before DB updates, but wanted to check that others experience the same behavior.

  Hello.

  I'm following the same practice as Troy here.  I saw vCenter sometimes survive a reboot of the db and other times not.  For me, the incompatibility is unacceptable and I plan accordingly.

  Good luck!