I have a DVD in the disc drive. How do I turn it on?

Similar Questions

• do not read the contents of the cd/dvd in the disc drive

  trying to read a disc, I get a message that the DMA is disabled for one or more devices 24/24 attached to the system.  How can I enable the DMA?

  Scroll to the low thios page and you will find a link to a video showing you how to check.
  http://www.myvideoproblems.com/tutorials/OptimiseMyPcForVideo.htm

• I have already installed LR4 and a new disc with LR5 on it (never activated - have the serial number).  I don't have a drive on my computer to install from the disc.  How can I go on upgrade to LR5?

  I have already installed LR4 and a new disc with LR5 on it (never activated - have the serial number).  I don't have a drive on my computer to install from the disc.  How can I go on upgrade to LR5?

  Download the installation files and use the serial number, you need to activate.

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• My Windows Media Player does not automatically recognize when a disc is placed in the disc drive.

  My windows media player does not automatically recognize when a disc is placed in the disc drive. I have to put the disc in the disc drive, and then close windows media player, with the disc in the disc drive already, then re-open windows media player. Reopened WMP with the disc in the disc drive, it recognizes the disc in the drive. It then functions well until I need to change the disk at this time I have to start the reboot stop of WMP. This problem has not allways exists just started a few months ago. Thanks for any helpful information.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  In addition,

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052

• Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.

  Windows media player dvd region

  After you apply an update to the media player, I now get the error message

  "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. »

  natuarally ive checked the area defined for the reader and even tried to re applying the region

  I then noticed its doing the same thing with dvd stored on my media server, and while he would not even play MPEG or avi stored on my hard drive

  I went to my comments to logon (standard user) media player works fine

  so I'm back and tried to reinstall the mediaplayer to my admin login, it wouldn't let me not delete it, ran Media Player microsoft penalty shooter, he said everything ok

  so I changed the guest account on an admin account to try to remove it from there, but as soon as I did this mediaplayer stopped working in the feedback connection that leads me to believe its a sort of level access virus, that has permeated the media player or a defect in this connection required to complete admin update media player

  Hello

  ·         Have you tried the steps in method 1 of troubleshooting?

  ·         Do you have any code or an error message when you try to uninstall Windows Media player?

  Method 1:

  You can try to connect the different DVD player and check if it works.

  Method 2:

  You can re - register wmp.dll file and check if it helps.

  (a) log on as an administrator.
  (b) click Start, type cmd in the Search text box, right-clickcmd.exe, click run as administrator, and then click on continue.
  (c) at the command prompt, type regsvr32 wmp.dll press ENTER.

  Method 3:

  You can also try to create a new administrator user account and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

• Get an error "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "

  * Original title: wrong Region

  Windows Media Player will not play CD - advise

  "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "

  Note I am eager to play a CD and it is recognizing a DVD?

  can anyone help

  Hello

  1. what version of Windows is installed on the computer?

  2. what version of Windows Media Player is installed on the computer?

  3. what region is your currently defined DVD player on?

  4. are you able to play other DVDs?

   

  Please follow the provided steps and update us with the results.

  Note: All the steps apply to Windows 7

  Method 1: Try to change the region of the DVD player and check the result. To do this, try the following steps:

  a. Click Start, click computer.
  b. right click on the DVD drive, and then click Properties.
  c. click on the Hardware tab, click the properties button and modify the DVD of the region.

   

  Method 2: Uninstall the DVD player and check.

  a. Click Start, type devmgmt.msc and press to enter.

  b. develop DVD players, right click on the sub element and click on uninstall.

  c. restart the computer and check the result.

  Once you restart the computer, the DVD driver will be loaded automatically.

  d. try to play the DVD and check the result.

   

  You can run the troubleshooting Windows Media Player DVD Troubleshooter and check that it helps.

  Open the Windows Media Player DVD Troubleshoot utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

  Let us know if it helps!

• Windows media player cannot play the DVD because the disc prohibits playback in your region of the world.

  "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "I'm getting it on all the DVD and video files now. Have downloaded new codacs did not help. Have you tried the fix auto, has not helped. Tried to download Media Player 11 but keep getting redirected to the checkout page. I have a valid version of windows Vista 32-bit.

  original title: windows media player

  The following article might be worth a visit.

  Windows Vista - change DVD region
  http://grok.LSU.edu/article.aspx?articleid=2334

  Please be aware that when you used all permits
  changes (5 max) region... it will stay on the last region.

• Error when you try to play a DVD: Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.

  copy a group of photos w/music (Smilebox program) on dvd;

  After following the instructions of SMilebox to burn "images set to music" on DVD, to the attempt of DVD playback, I got following error message: Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.  We live in the Washington area. I didn't know that DC was considered an unusual geographic region?

  Hey nongeekbetty,

  The DVD is encoded for a different region. Most DVD readers only works with DVDs that are coded for the computer was purchased in the same region. So if you buy a DVD in one country and then try to play on one computer from another country this DVD could not play.

  Step 1:

  Make sure that the DVD region is set to the appropriate region:

  a. Click Start.

  (b) in the search box, type Device Manager.

  c. right-click on the DVD drive.

  d. right-click on it and select Properties.

  e. make sure that the region will be resolved.

  For your information:

  http://Windows.Microsoft.com/en-us/Windows7/playing-DVDs-in-Windows-Media-Center-frequently-asked-questions

  Step 2:

  Also temporarily disable User Account Control (UAC) and check it out.

  http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off

  Note: Activate it once you are done with the check.

  Kind regards

  Savan - Microsoft technical support.

• Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the mistake of the world.

  Original titile: burned disc will not play

  I burned a photo slide show and added music.  However, when I put the disc playing, a window pops up that says "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world.  You must obtain a disc that is intended for your geographic region. "I bought the discs in my geographical area, so why didn't he play?  Any help would be appreciated.

  Hello Brian Dunbar,.

  I suggest to change the Device Manager DVD player region settings and check if this solves the problem.

  Follow these steps:

  a. click the Start button.

  b. management of devices of the type in the search box and press on enter.

  c. develop CD-ROM/DVD-ROM drives.

  d. right-click on the DVD-ROM and select Properties.

  tab select DVD Region e...

  f. Select your region the list form and click OK.

• Satellite L300D - TEMPRO said that I have no space on the HARD drive

  Hello

  I'm new to the site... I got a L300D for three months and no problem but in the last two weeks, I had TEMPRO warns my readers have free space that disappears quickly.

  In fact at this moment I have a total of * 800Mbs * when in fact I more than * 90Gbs * and I even used a shedder file to clean up more space.
  Is there a way to get TEMPRO on track or is this a normal problem, unsolveable.

  Hey Buddy

  TEMPRO is a tool that scans the entire HARD drive
  I guess you have different partitions on the HARD drive and I guess Tempro tells you that the free space among available partitions_ _on breaks down

  Well, I'm not quite sure what partition is a sense but perhaps hidden partition Vista first, s (WinRE).
  You should know that Vista uses a hidden backup files partition, this partition can be used if something goes wrong with the operating system

  I think Tempro means that partition

• Satellite C660 - the disc drive tray opens not requested

  When I start to read a disc in the disc drive of my Satellite C660 drawer opens each time.
  Who knows how to solve this problem?

  To be honest I do not understand what bin do you mean exactly.
  Can you please tell us what disc you want to play and can you pleae make a screenshot of this plateau.

  It will help me to understand what you mean exactly.

• Media Player error: IWindows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.

  I copied a dvd on a USB from a friend, I can see from memory stick, but when I tried to copy it to my computer and read it, it says that iwindows Media Player can't read the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. Can someone help me please?

  Thank you

  I copied a dvd on a USB from a friend, I can see from memory stick, but when I tried to copy it to my computer and read it, it says that iwindows Media Player can't read the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. Can someone help me please?

  Thank you

  =========================================================
  Best bet would be to download and install the free software
  VLC media player... it should play the video without the
  you need to change the region code.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.6 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.6 - win64.exe)

• I have a partitioned drive and you need to move the updates of the E: drive, how can I do? ___

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I a partitioned drive and you need to move the updates of the E: drive, how can I do?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  You do not have.

  The updates will install on the drive where Windows resides.
  TaurArian [MVP] 2005-2010 - Update Services

• I have the genuine product key genuine microsoft windows vista business but I have lost the cd/dvd of the windows disk, how to manage another copy of windows vista professional?

  I have the genuine product key genuine microsoft windows vista business but I have lost the cd/dvd of the windows disk, how to manage another copy of windows vista professional?

  If you bought the retail of Windows 7:

  How to replace Microsoft software
  http://support.Microsoft.com/default.aspx/KB/326246

  If Windows is preinstalled with the computer:

  If you do not install disks:

  Contact the OEM computer manufacturer and ask them to send you an installation to your computer disk - they may charge a small fee. Contact information for the manufacturer of your computer can be found here:

  http://support.Microsoft.com/GP/oemphone/

• I have my photos in the F drive an external drive. LR5 records my photos in the partitioned hard drive, D drive in my computer. Why I can't change the dafault in LR5 player?

  I have my photos in the F drive an external drive. LR5 records my photos in the partitioned hard drive, D drive in my computer. Why I can't change the dafault in LR5 player?

  When I 'import' a RAW/DNG file, the file gets automatically saved the item COPIED in my D drive under "My pictures" folder This info is available on the left panel. Instead, I want the file to go in my F drive which is my external hard drive.

  Lightroom help: explains how to import photos to a specific location. Scroll down to section 5, «Say Lightroom where to put your photos» Lightroom help | Import photos from a camera or card reader