I have a good wireless connection, but I can't get my printer to print anything

Similar Questions

• After a windows down I must reinstal Foto shop 13 items. I have a good internet connection, but the program cannot make a connection for singh to the top.

  After a windows down I must reinstal Foto shop 13 items. I have a good internet connection, but the program cannot make a connection for singh to the top.

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

• My laptop connects is more to the internet, either hard wired or wireless. When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before.

  My laptop connects is more to the internet, either hard wired or wireless.  When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before.  My other computer has service very well (or I wouldn't send this message) I checked everything, what to do?

  original title: internet connection.

  Hi vonhatten,

  1. Did you the latest changes on the computer?
  2. You receive an error message when you try to connect to the internet?
  3. You have security software installed on the computer?

  Refer to the article below and try the steps mentioned, check if it helps.

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

• I can create a password for my wireless connection, but it still says that there is no guarantee. What should I do?

  I will create a password to my wireless connection, but he said still not guaranteed.  I'm doing something wrong?  I have windows 7 and use an ATT router.  I can't understand why I can't have a password, even if she gives me the opportunity to make a.

  There are safe areas normally two on a wireless router - one is the password to connect to the router and change its settings and the second is the Security (e.g. WPA2) wireless mode and the key.  This is the second (setting a mode of wireless security and the key) will change the label on your connection wireless "Unsecured."  You probably need to review instructions specific to your model of router in order to change the settings of the router.

• My computer connects to my wireless connection but it say no Internet access

  Original title: my computer connects to my wireless connection but it say no Internet access

  I have windows 7 I don't know that much about computers, so I do not know what information you need to help me, but if anyone can help me get back on the Internet would be great, I have used the computer before and it worked very well my brother and dads computer still works fine in fact my iPod touch but I need my laptop for work someone ' a please help if you need more information I would like to know how I get the info from my computer and I'm going to do.  Thank you

  I rebooted my router also I uninstalled my card wireless on the laptop and reinstalled computer I also deactivated and activated the wireless network connection and now I have a mini port Microsoft virtual wifi, which I disabled it I don't know what else to do

  Hello

  1 did you do changes on the computer before the show?

  2. What is the exact error message you get?

  3. What is brand and model computer?

  Method 1: Turn off the antivirus

  See the following site:

  Disable the anti-virus software

  http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 2:

  Follow the troubleshooting steps in the site mentioned below:

  Windows wireless and wired network connection problems

  http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows.

   

• I connect to Windows Messenger, but "the email address and the password is incorrect." Please try again"I have already reset my password but still can't connect.

  Windows Messenger connection problem

  I connect to Windows Messenger, but "the email address and the password is incorrect." Please try again"I have already reset my password but still can't connect. Can someone help me?

  Hello my. CatherineMorit,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• When I connect with AOL9.7 the windlw of welcome appears, but I can't get my mail.

  Problems with getting mail

  I have windows XP. I downloaded AOL9.7.  When I connect with AOL9.7 the windlw of welcome appears, but I can't get my mail. The window to welcome says I'm not connected and click here. When I click on the message I get my mail. Why don't I have to sign in twice?  any help is appreciated, thanks.  .

  You should check with the support of AOL.  It is a forum for Windows.

  Good luck.

• WiFi is connected but I can't connect to the net, what to do?

  WiFi is connected but I can't connect to the net, what to do?

  Hi Torrespa,

  1. what happens when you try to connect to the internet?

  2. were you able to use the Wi - Fi connection earlier?

  3. what brand & model of network card?

  You can follow this link & check if the problem persists:

  How to fix wireless network connections in Windows XP Service Pack 2?

  
  Reference: Wired and wireless in Windows network connection problems

   To set up automatic wireless network configuration

  Hope the helps of information.

• have hp2009m comp with windows vista, how can I get my xbox wireless remote to work on it?

  have hp2009m comp with windows vista, how can I get my xbox wireless remote to work on it?

  Hi Alex,

  You can view the following items and see if it helps.

  Connect a game controller

  Xbox 360 Setup

  How to connect a wireless Xbox 360 controller or headset to your computer

  Demonstration: Creating an Xbox 360 in an Extender for Windows Media Center unit

  You can also get in touch with technical support Xbox for the same thing.

  Xbox 360 support

   Hope this information is useful.

• DJ 3050 has j611 says connected but offline, can't print why

  DJ 3050 has j611 says connected but offline, can't print why

  lehmankm wrote:

  light blue (flashing) wireless...

  Ah... There's the data I needed.   Wireless light flashing means that you are not connected to your routers SSID.   You need to connect the printer to your routers SSID with password.

• I have a plan with adobe photoshop and lightroom.  The lightroom works fine, but I can't get the photoshop to run.  I have to go back to an old copy of photoshop to do the work.  All thoughts

  I have a plan with adobe photoshop and lightroom.  The lightroom works fine, but I can't get the photoshop to run.  I have to go back to an old copy of photoshop to do the work.  All thoughts

  Thank you for your help.  I just downloaded the Photoshop CC2015 for the 7th time and it now seems to work fine.  Sorry to have bothered you... It is good to know that there are people like you who will help if necessary.

  Thanks again.

• Bought LR6 DVD but the installer does not connect to the internet for I can register it.  I downloaded the trial version to work around this problem, but I can't get the program to start.  I get the same message that I should connect to the internet and c

  Purchase DVD LR6 Adorama, but Setup does not connect to the internet so that I can record.  Internet works fine.   I have Adobe account.

  I went to Safari to Chrome and downloaded the trial version in the hope to bypass the DVD version, but I can't get the program to start.    I get the same message that I should connect to the internet and connect.  It seems impossible after 3 hours.  Spent an hour chatting with the support of the India.

  Also remove the cookie file and reg Lightroom then enter the serial number and check.

  Windows:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  programdata %

  It will open the ProgramData folder. inside locate Adobe folder.

  Go to Adobe > Lightroom.

  Open Lightroom and delete all the files inside,

  Then run LR 6 and enter the serial number,

  Mac:

  (1) right-click on the icon in the Finder, then select the 'Go - To Folder' option.
  (2) you will get a text box, type in the following command and then press the 'return '. (" Do not miss ~ symbol" "')

  ~/Library

  It will open the folder of the user's library.

  (3) then navigate to Application Support > Adobe > Lightroom.

  Open Lightroom and delete all the files inside,

  Then run LR 6 and enter the serial number,

• I did an extra e-mail for my partner account. We read emails when I am connected, but she can't read them when it is recorded.

  I did an extra e-mail for my partner account. We read emails in our two accounts when I am connected, but she can't read his email, if it is logged in and of itself. How can we make accessible account directly for her?

  deleted

• I need free space in my Mac Air looking at 'about my Mac"it looks like I have 40 GB as backup, but I can't find it with the ODS

  I need free space in my Mac Air

  I used "about my Mac' and TI - s telling me I have 40 GB as backup, but I can't find with ODS (OmniDiskSweeper)

  ODS tells me I have just 30-40 GB busy.

  I can find a way to release the backup file?

  I m also helps TimeCapsule and back up there it's only 30-40 GB (as the ODS is to find)

  appreciate the help

  It seems to me that you look at the Snapshots Time Machine:

  https://support.Apple.com/en-us/HT204015

  You can ignore them.

  If they bother you, find the instructions to put out them here:

  http://pondini.org/TM/30.html

  Ciao.

• I have a new Tower (Windows XP [6et7]), but I can't get my Brother printer to install/work. It is a Brother MFC-420CN purchsed 2006.

  EJE

  I have a new Tower, but I can't get my Brother old Multi-funtion machine to install.

  work (MFC-420CN).  I can not even find a free driver.

  EJE

  Hello

  • What happens when you try to install it?
  • You receive an error message when installing it?

  I suggest that you try to install the drivers make this link:
  http://welcome.solutions.brother.com/BSC/public/us/us_ot/en/model_top/colormfc/mfc420cn_us.html?reg=us&c=us_ot&lang=en&prod=mfc420cn_us