I have a new Iconia Acer 10 a system is does not accept S/N or SNID for registration

Similar Questions

• I have window vista lenovo ideapad. The cd driver does not accept the cd what do I do?

  My laptop does not accept any cd on its insertion into the slot of the cd player. It is ejected.how I can it rectified?

  Hello

  1. have there been recent changes to the computer before the show?

  2. you get any error message?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to run fix it from the link below.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2: Your CD or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/314060

  Hope this information is useful.

• Download windows 7 OS from a flash drive, I have a new Tablet comes with windows 8 and does not have a CD/DVD player?

  I feel then very hard to adjust windows 8 to work properly I don't want.

  You will first need to go to the website of manufacturers for your model computer and first find out if there are native drivers in Windows 7. A large number of computers that are preloaded with Windows 8 have no native driver support for Windows 7 by the manufacturer. If there is no native driver, you will need to consider returning the machine and buying a machine preloaded with Windows 8 Pro with downgrade rights to Windows 7 Professional. Or look through the catalogue of manufacturers for systems already preloaded with Windows 7, usually the business sector will have these options.

• The new version of FireFox in Windows 7 does not accept an address typed in the address bar

  Windows 7
  New version of Firefox

  When you type a website address in the address bar and pressing ENTER it nothing happens. I go back to the previous version of Firefox, and this ability works very well. This is a feature I use a lot.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Try to open a new window to see if the address bar works in this new window.

• Security updates have blocked incoming messages in Windows Mail - security popup does not accept the password, error number: 0x800CCC92

  Original title: updates blocked mail in Windows Mail - security popup does not accept the password

  Hello - three updates installed security today (KB2691442, 2718523, 2596744).

  Now Windows mail will no longer accept mail entering into my pop3 account.  Security pop - up demand for a/c of the user and the password - I've checked tools > accounts > properties, reset the password, but it does not accept pop-up.  Here is the error message:

  .... POP3, server response: '-ERR [AUTH] username and password not accepted.', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92

  Help please! John

  Hello

   
  See the steps in the links.
  Troubleshoot Windows Mail

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Windows Mail: Setting up an account of end-to-end

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  Hope the information is useful.

• I'm trying to set up the new account on 2nd used computer, Outlook Express does not accept my new password.

  trying to set up the new account on 2nd used computer, oe does not accept my new password.

  If this account POP3? If you try to set up the same account on a second machine, all settings including the password must be the same.

• Error in partition Acer Iconia B1 does not accept the update.

  My new Acer iconia b1 - a71 16 GB does not accept the OTA update in the system start menu! He accepts, and download the update. After that is give me to reboot and install. And after - installation under the start menu in the system stops

  ERROR:-invalid partition setting
  17: 238e8000:888e8000 of fat
  Instalation aborted.

  The Tablet is clean and the. I tested it without SD card inside. I even try with the original OS rom in the Acer support site - and still the same error! Can anyone describe it is hardware problem to return to the supplayer or how to fix this problem?
  Can you help me?

  A hotfix is available to resolve the error of invalid Partition. In addition, we have created a few video tutorials that will help guide you through the installation of the patch.

  Download the patch

  Iconia B1 - A71, install the USB 2.0 driver - video tutorial

  Iconia B1 - A71 error invalid when updating Android (FAST) partition - video tutorial

  Iconia B1 - A71 error invalid when updating Android (FULL) partition - video tutorial

• Hi - I recently bought a new iMac. I have a design Premium cs5 recorded which is an upgrade - I have no disk for cs4 but the qualifying serial number for it. I installed cs5 via download on my iMac, but it does not accept the ser

  Hi - I recently bought a new iMac. I have a design Premium cs5 recorded which is an upgrade - I have no disk for cs4 but the qualifying serial number for it. I installed cs5 via download on my iMac, but it does not accept the serial number. If anyone can help. Anyone who thinks that Adobe will lose a lot of customers with no chat or calling users cs5 support?

  You can support the serial number and activation support.

  Mylenium

• Acer Aspire laptop with Vista Home Basic Edition does not, System Restore does not, sfc, find corrupt files but do not repair. Need help!

  Hi, I have an Acer laptop Aspire with Vista Home Basic Edition that came pre-installed, so no records only the disk hard drive partition.

  I turned on my laptop today and it starts but the loading bar of stalls at the black screen with "(c) Microsoft Corporation" and dragging green. The slide bar will continue to drag, but nothing else happens which means that I understand even as much as the login screen. I rebooted and tried Windows recovery, but the only remedy to what he suggests is a restoration of the system, which does not have any point, I try to restore it.

  To remedy this, I have connected in safe mode and ran the SFC command prompt. It scans my system and told to find corrupted files, but he can't heal some. This is where my knowledge limit runs out. I don't know how to fix the files that the SFC cannot. (Also I created a journal using the findstr command prompt and checked but it say anywhere that it was unable to fix it so I'm not even sure how to identify corrupted files)

  As it's an Acer laptop, Aspire I'll try their eRecovery tool to return my computer to factory settings, but it won't work in safe mode, and as I said I can not connect normally. I tried alt and F10 at the initial boot screen when I turn on, it loads the windows files and shows the Acer "Please wait a moment" screen and then nothing happens again.

  I can't afford to get it fixed, and there is no chance I can get a new laptop. Any ideas/help? Thank you.

  Hello

  You have t in Normal Mode to resolve problems by using upgrade repair facility that is SFC

  Read this topic eRecovery Acer.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  See you soon.

• I downloaded the new tools tab of 2011 and it does not appear in Firefox c. 40.0.2

  'Ask.com' guard replace my new choice of tab and 'ask.com' (and 'request') does not come under the extensions, modules, plugins, or even on my computer. I tried every fix offered by Mozilla and Microsoft without success. Today, I found and installed the new tab add-on tools, and it does not, even after restarting Firefox.

  Help please remove ask.com as my new tab page!

  Hi, 'Application' must be there somewhere, please try through Remove Ask Toolbar and Ask.com Search (uninstall Guide) by the Councils of Malware.

  Note that not all programs removal allows to detect all malware, you may need to run multiple or all of them.

  After the removal you may need to reset your new tab, search etc, what you can do by running the add-on SearchReset.

  I see that you have the extension of new tools tab, which should be in your modules Manager Ctrl + Maj + A > Extensions, but 'Request' can interfere with it.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• Windows Vista does not accept my password (unchanged) but I have no recovery disk - Windows is already installed

  Hello

  As the title says after using my laptop without any previous problems, suddenly I can not connect on Windows Vista.

  I'm 100% sure that the password has not been changed, caps lock, shift, caps lock Num etc is not active.

  When I bought the laptop, Vista was already installed, so I don't have a recovery disk.

  Any help would be appreciated.

  Hello

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  This is the Information from Microsoft on the problems of passwords;

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  Malware can also cause problems with passwords:

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the above does not fix it:

  Here are the different methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• OfficeJet Pro 8500 does not accept the new cartridge

  My OfficeJet Pro 8500 has 910g does not accept the new magenta cartridge. It displays replace following used cartridge in the order of printing continues (translated from Swedish). I've done various resets and now to restore the alos an OOB (out of the box), does not help. My weighs 40g 940XL cartridge so I know what it it not empty. I have read a lot about the problems of cartridge maggenta but found no solution. The printer is fine, but this problem is driving me crazy! I have always recommended HP printers and have owned quite a few over the years,

  No problem, I understand.

  I think that could happen is that the oval pin mechanism comes into contact with food has become defective over time. Its supposed to sink to bottom when feeding is complete (on inserting). Over time as the ink level runs the mechanism will expand gradually until you reach full extension on what an ink level alert is triggered. What might happen in your case, is that the mechanism is not entirely depressing even when the new full provision is inserted. This would explain why to apply the tape inside the oval window on the supply allows the new offer be detected. Unfortunately, the fix for this would be to have the machine. If you think it's something you want to do here is a link where you can check the warranty status of the printer and based on this status, you will be presented with relevant options

  http://h10025.www1.HP.com/ewfrf/wc/weInput?cc=us&DLC=en&docName=c01321436&LC=en&product=4116838

  With regard to the branch point the device directly into the wall socket, sometimes for some questions (usually power up/on) the resolution can be plug directly into the wall in the routing through a power bar or surge protector can induce weak variations of the voltage applied to the unit. However, this should not be a factor in the problem you are experiencing, so there should not be any need for you to change your current configuration.

  More sorry that you are having a problem with ink level detection on your device. Please post back with other questions.

  Best.

• I have wireless devices outside of ALFA UBDO gt8 but does not support its driver on windows 8 for installation

  I have wireless devices outside of ALFA UBDO gt8 but does not support its driver on windows 8 for installation. She did not support on windows 7. isn't there a mechanism to make as the support of windows 8?

  Original title: not to support the pilot

  Hello

  Don't forget to check with the help of the manufacturer of the device as their may be a newer version, if necessary
  still in beta.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8 - Hardware
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft - Windows 8 - why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft - Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• 6210 all-in-One printer: European-sold printer does not accept the United States-have sold cartridges

  Hello

  I need advice to fix this... My printer (HP Officejet 6210 all-in-One Printer) that I bought in Europe does not accept the cartridges sold US. The printer identifies the cartridge 94 as incompatible. On the site of HP 94 cartridge is listed as being compatible with this printer (the original cartridge is 338). It seems that I need a new printer? It still works perfectly. Should I try other types of cartridges?

  Thank you.

  You will need to Contact HP to ask a "regionalization Reset." Do not charge for this, it is covered under the warranty of the cartridge. You will need to have access to your computer and printer then on line with HP. You will also need to have a set of cartridges for the new region, once completed reset cartridges of region of origin no longer works.

• Elements of Photoshop 7 new download does not accept my serial number for 2009. Can anyone help?

  Elements of Photoshop 7 new download does not accept my serial number for 2009. Can anyone help?

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Are you using a computer administrator account will be full read/write permissions?

  I don't know if what you have is included in the link below, but take a look

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  You MUST use the special version and the serial number on the page, not your original drive or serial number

  NOTE that CS2 will not install on a "modern" with an Intel Mac

  When you install the special version of the PPro2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option