6210 all-in-One printer: European-sold printer does not accept the United States-have sold cartridges

Similar Questions

• 4380 all-in-one printer does not detect the print cartridge

  My all-in-one printer (model 4380 vivera, bought in Switzerland) does not detect the print cartridges. I traded the color cartridge with that of another, older than I was and now everything is fine. I don't know when, this problem will arise again. The last time I was so frustrated that I bought another printer (HP 2050) which seems to work without problems. I have unplugged, replugged and clean the cartridges with filtered water. The problem may arise at any time. Help, please. Thank you.

  I'm sorry you have a problem with your ink not detected.

  The problem may be because the printer is of the Switzerland and the ink cartridges are NOT. The printer will only accept cartridges of the same region/country.

  For example, if you are in the United States and buy a printer and the cartridges come from GERMANY, he cannot read. Will suit most, but some of the contacts are different causing not well read the cartridge from the printer.

• My HP Photosmart C8180 All-in-One Printer does not scan the black and white film strips or slides.

  This problem occurred recently. Previously, the scanner accepted slides and strips of black and white film and scanned them without any problem. Since I've updated the OS on my iMac (I am currently using OS X 10.6.8), I contacted Applecare because I thought that it was possible that my current operating system might have some incompatibilities with the C8180. 'Expert' AppleCare then accompanied me by a uninstall/reinstall, but it has not solved the problem. AppleCare said then that the problem is no doubt HP hardware failure. I find it quite peculiar since the scanner otherwise Applecare analysis works and there is no problem with respect it print or copy.

  Hi, JAOC,.

  Your C8180 can scan slides or films fixed on the memory card.  This will allow you to test the scanning equipment.

• changed router photosmart b110 e-all-in-one printer does not work

  changed router photosmart b110 e-all-in-one printer does not work

  Hi aged60,

  I'm sorry to hear that you have linking problems with your Photosmart B110 printer.

  I've included a link to HP Wireless Printing Center Troubleshooting web page.  In the section entitled "your printer was working on the network before and now is not" there are clear instructions to follow when your router has been changed or updated.  If you follow the instructions you should be able to communicate with your printer.

  HP wireless printing Center - Troubleshooting

  http://www.HP.com/global/us/en/wireless/troubleshooting.html

• HP Officejet 6500 all-in-One Printer does not send scan and HP print and Scan doctor without help

  HP Officejet 6500 all-in - One Printer does not scan for Windows 7 and HP Print and Scan doctor says 'not imaging' & send error message 8, [1.0,-2147221498)] - I reconnected my officejet drivers reinstalled, etc & nothing works.  I looked for help & tried repeatedly, & am willing to renounce HP.

  Hello

  Thank you for using the HP Forums.

  You can try this alternative solution to Scan:

  HP extended Scan

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  Let us know if it works.

• Just upgraded to Windows 7 and my Dell All IN One Printer does not print. It is said that the pilot of the AIO 942 not found

  Just upgraded to Windows 7 and my Dell All IN One Printer does not print.  It is said that the pilot of the AIO 942 not found.

  Anyone where I can download this driver?

  See http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Dell%20942%20Photo%20All-In-One%20Printer&v=Dell&uid=942STD&pf=0&pi=1&c=Printers%20%26%20Scanners&sc=Multifunction&os=32-bit.

  There are only drivers for Vista at http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?c=us&s=bsd&cs=04&l=en&DriverId=R151559.

  They are supposed to work if installed in compatibility mode. http://en.community.dell.com/support-forums/peripherals/f/3528/t/19319527.aspx.

• 6520 inkjet printer all-in-one: printer does not obey orders requested

  When I try to change the printer from printing, for example a booklet to print a standard A4 size single sheet it does not obey the request, I have uninstalled and reinstalled the printer software and check the updates for software and drivers with no result.

  Anybopdy can help?

  Hi @Brisey,

  Welcome to the Forums of HP Support! I see you are having problems printing to A4 paper size. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I have provided a document to check the paper type and size settings of paper in the print driver, Printers HP Photosmart 6520 - Printing Documents (Windows).

  If you still encounter problems printing to A4 paper size, change the location settings on the computer to the default paper settings see if that will help.

  • Go to start, Control Panel, language and region.
  • Select the location tab, click the menu down and select the United States.
  • Then, click the Formats tab and click the menu down and select English (United States).

  Restart the computer.

  Again, check the paper size settings in the driver printing and the application you are printing from, go to file, Page Setup and select the correct paper size.

  You can also install a generic driver, if the problem persists.
  On the computer, go to start, devices and printers, select Add a printer. Follow the steps, select HP and Deskjet 9800 in the list. Set it as default printer.

  Please let me know the results and if there is anything else I can help you. Thank you.

• OFFICEJET J4680 ALL IN ONE PRINTER does not print after installing Windows 7

  THIS HAPPENED MORE THAN A MONTH. I STARTED WITH WINDOWS VISTA. HP SUPPORT ADVISED LATER FOR THIS WINDOWS 7 WORKS BETTER FOR MY PRINTER. NOW I HAVE INSTALLED WINDOW 7 AND I GOT THE PHONE SUPPORT TO GO ON MY COMPUTER AND SET IT UP. EVERYTHING WORKED AS SUPPOSED, PRINTING, SCANNING. THE NEXT DAY I TRIED TO PRINT SOMETHING AND I WENT BACK TO SQUARE ONE. The SCREEN LIITLE ON THE PRINT JOB CAME AND SAID THAT the PRINTER does NOT PRINT. I WENT TO THE HP SOLUTION CENTER AND A NOTE SAID THAT THE PRINTER IS DISCONNECTED. I RETURNED AND COPIED MY NETWORK CONFIG. AND THE WIRELESS TEST. EVERYTHING IS RUNNING WELL HUNG OF THE PRINTER. THE DEFAULT PRINTER IN THE RIGHT IMAGE. THE ONLY THING I NOTICED WAS IN THE PORT AREA. UNDER THE WINDOW VISTA, I GOT TWO PORTS. ONE WAS FOR THE PRINTER AND OTHER FAX. WHEN THE HP PRINTER HAS BEEN REINSTALLED, I DON'T KNOW IF IT STARTED WITH ONLY ONE PORT. THE PORT IS ENABLED BY IT AND HAS THE FAX FROM WORD TO THE END ON WINDOWS VISTA, BOTH PORTS HAVE THE SAME INFORMATION, EXCEPT A EU FAX OF WORD AT THE END ANY HELP ON WHAT SE PAST.

  I JUST INSTALL WINDOW 7, MY OFFICEJET J4680 ALL IN ONE PRINTER. NOW IT WON'T PRINT. THE DAY BEFORE, IT WORKED.

  Hey 123 problems,.

  You will need to go to the HP website to download the latest software/drivers for your printer on Windows 7:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3692888&LC=en&cc=us&DLC=en&lang=en&cc=us

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Photosmart premium all-in-one: printer does not print.

  I printed a photo of the night before and the next day it wouldn't print.  I put in a new black cartridge HP first, and when it does not work I put in a new photo cartridge.  All my cartridges show as complete on the computer report but the report to the printer does not show anything in the settings of the picture. I downloaded a driver updated, still no luck.  Very frustrating!  What can I do?

  Help please...

  Yay Jabzi!  I am so excited!  It actually worked!  I am 72 and a little hesitant to pull things out of machines so am very happy and grateful for your help.  Thank you!!!

  Marg

• My HP Photosmart C4280 all-in-One printer does not print PDF files. I use Windows 7 SP1.

  My C4280 printer does not print PDF files. Cannot understand it.

  I fixed the problem by uninstalling the printer, then re-install. That seemed to do the trick. Thanks for your help though.

• Just bought a Deskjet 3520 e-all in one printer but moving to the United Kingdom, can I still use it?

  It says in the guide specifications power:

  Power adapter: CQ191-60017

  Input voltage: 100-240 VAC

  Input frequency: 50/60 Hz

  I recently bought the deskjet 3520 printer, printer all in one, but was accepted to school grad to the United Kingdom, I obviously want to take my printer with me but wonder If it will take a power adapter with a UK plug adapter? and if yes where can I get a.

  Hello

  Yes, but the problem is not different power, you only need an adapter for $ 5 you can find many airports or tourist shops. The problem will be inks. You may not be able to use the ink cartridges sold in the United Kingdom. You should contack HP to reset the printer. Please read this:

  http://support.HP.com/us-en/document/c02558798

  Kind regards.

• HP Photosmart 7525 e-all-in-one printer does not print black

  I got my product for a little over a year (out of warranty), I replaced all the cartridges and fact print diagnostic quality. However my black will not print. Photo black works, but not the principal, great one.

  I cleaned the pinhead super. At the beginning of printing, it was black, but then disappeared to grey streeks.

  Can anyone help with this?

  Thank you!

  The document here can help solve the black does not print on your Photosmart 7525.  Go through each of the steps, but be sure to check the events on solution 6.

  If the steps described in the seven first solutions do not resolve the problem of the post here can help.

• All-in-one HP Officejet 4635: my HP Officejet 4635 all-in-one printer does not print since upgrading to Mac 10.10.1.

  All-in-one HP Officejet 4635 does not print since upgrading to Mac 10.10.1. Any suggestions? Thank you!!!

  Hi brenHP4630,

  You might want to try updating the driver for your specific operating system. You can find the download HERE.

• HP C5280 All in one printer does not print all of the beginning of the page or end of page

  HP C5280 All in one

  Does not print all of the beginning of the page or end of page

  Hi david skelton.

  I would like that you start by checking that you have the latest drivers for your printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&product=3204464&

  I hope this helps!

• Photosmart HP5520: HP 5520 Photosmart All in One printer does not print

  Hello

  I was away for a few weeks and when I got home that my HP 5520 would not print. Troubleshooting in devices and printers did not fix it. The full current confirmed printer HP S/W installation wizard and the drivers installed. The installation wizard produces a test analysis, but not a test print.

  Print and scan doctor also identities printer OK but cannot produce a test print, even if it did not produce a test INTERNAL page. Printing and scanning identified an issue with the S/W which "cannot be fixed without uninstalling and reinstalling" the software.

  Software reinstalled as suggested, but it has stalled on "checking network das" so reinstal is not completed properly I guess. Now, I seem to be less well off than I was before.

  I checked the print spooler and its running ok.

  I checked windows udates and they are all up to date

  I even tried restoring the system in desperation, but that has not changed anything either.

  I tried using just USB connect - no effect

  I have true wireless use only for connect - no effect

  I am running windows 10 on HP pavilion laptop.

  I'm running out of ideas on how I can print again, so any help would be greatly appreciated!

  Thank you very much

  This is the solution, for me at least. I was convinced there had to be a solution of windows related to this, but despite several attempts, I could not get the answers so ultimately I reset the PC and it took about an hour, but when he did all broken back in life and has worked as before. Bit of a pain having to reinstall software but it was worth it.