I have a p6310f and I have my cpu fan connected directly in my msu and fan controller how do I
can say that the cpu fan has no error and fan service doesn't have a system soon error
The fans (CPU and case) are attached to the motherboard for this (the sensors) headers. Connect directly to the power supply (not a ' SSM') bypassed motherboard sensor circuit.
Tags: HP Desktops
Similar Questions
-
I have my printer connected to my router via a usb cable. I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print to my printer via the router?
Usually, you need to install the printing software / drivers on your PC, configured / installed specially for a printer "remote" (its an option in the installation of the printer software)
-
I do not have the security on my browser lock and need to how can I be sure stuff is safe?
I have no lock on my browser and duty security how can I be sure that my stuff is safe?
The padlock shows only that there is a secure connection and does not guarantee that you are connected to the right server. So you could always be connected to the wrong server if you make a typing mistake in the URL and someone said that mistyped the URL. The lock feature has been replaced by the identity button of the Site on the left end of the address bar (address). Extension locks mentioned above will help you to remind you if you're always looking for the padlock icon.
This actually exists since Firefox 3.0 is not new.
Another link to this topic.
http://www.Mozilla.com/en-us/Firefox/security/identity/ -
I have a Macbook Pro 2015 retina and I wonder how the cycles of battery are calculated?
I have a Macbook Pro 2015 retina and I wonder how the cycles of battery are calculated?
If I load to 100% and then run it down on battery to 0% of course it counts as a battery cycle.
If I recharge to 90% and run up to 5% or 10%, which count as a battery sprays? Between what % are there?
The reason I ask is that I try to keep the cumulative battery cycle count down.
Thank you
http://www.Apple.com/batteries/why-lithium-ion/
Whenever he finishes a full charge, it's a cycle. If you charge 70% one day, then 30% another day, it's a cycle.
The Apple site, I posted above, it explains very clearly.
A cycle is counted when the battery has completed a 100% charge, not a discharge.
-
I have lost my cdrom tools and utilities! How can I get another?
I have lost my cdrom tools and utilities!
How can I get another?You can order from the authorized Toshiba maintainer in your country.
It s not expensive. Do simple call the guys :) -
Hi everyone, this is my first post, also help on the post would be appreciated.
I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.
Thanks in advance
Newbie
The only way to install an ipad app is through the app store. PC or Mac software does not run on the ipad. Search in the contacts link at the bottom right of this page. Give apple a call.
I guess is the icon for pages in icloud for storing documents pages. At the same time, apple had a cloud based pages. Not sure what happened to her.
R
-
I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?
If you are looking to get audio only from a YouTube video, all you need to do is read your video and while it's going to copy the link. Then on another tab, open listentoyoutube.com. Just follow the easy directions and paste the link.
Hope that helps. I found out a month ago and I have 4 CD made from these audio files. There is a lot of fun to find obscure stuff and making CD of songs.
Jon
-
Original title:. Nothing works.
All my .exe files have been removed. as well as system32\rundll32.exe... How can they be retrieved when no file opens and the system restore will not work. I can't install a fixit program or run anything at all.
Safe mode?
Looks like you have a virus/trojan/worm infection pretty good...
Actually, even if you get executables run again - you can be (read as "will be") better off the coast of a new facility. Wipe and install media with your product key and other serial numbers and installation for other products media you own and restore your last recognized reliable backup for your files.
-
I have two large black areas on each side of my screen. How to resize my screen to fit the screen of my computer? (and yes I tried the button expand) :))
Hello val2000, welcome.
These games is managed inside of Internet Explorer? If this isn't the case, then I suggest contacting the manufacturer of your computer for the latest pgrahics drivers. If installation of those who does not resolve the problem, then try to change your resolution to one of the following values (depending on the size of your screen):
1024 x 768
1280 x 800 (wide, common form for laptops)
1280 x 1024
1680 x 1050 (widescreen)To change your resolution:
1. click on START
2. click on "Control Panel."
3. double click on "display".
4. click on the tab "settings".
5. change the resolution on your cursor tab and then click on 'Apply' at the bottom rightLet us know what happens
Thank you! Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I have Windows Vista installed on a Dell Inspiron 530 s. Vista can be upgraded to windows 10 and, if so, how?
Vista is not included in the free update. If your hardware is compatible wins 10 you can buy a key for windows 10
1 GHz processor or faster1 GB of RAM (32-bit) or 2 GB RAM (64-bit)
16 GB of disk space available (32-bit) or 20 GB (64-bit)
Graphical device DirectX 9 with WDDM 1.0 or higher driver
Your processor (CPU) must support the following extensions: SSE2, NX, EAP -
I have Windows Vista and you are using Microsoft Works. I would like to make my computer b bilingual English and Hebrew. How do I dot it? Just reply to * address email is removed from the privacy * thank you
Hello
I suggest you follow the steps in the link below and check off the question:
How can I get additional language files? :
http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-additional-language-files
I hope that the information above helps you.
-
Original title: connect/disconnect sounds in the background
I had to replace/upgrade to update my wifi router after purchase/adding a 'Smart' to my network TV and now have a noise to connect/disconnect running in the background, on something, every few minutes. It does not affect the operation of my computer, but it is very annoying. Cut the old router market and connect and disconnect before replacement, but did not any noise so I don't think it is related to that. I can't find any evidence of the old router on the computer anyway. I hope you can help me!
Hi Danielle65,
You can try the following steps and check if it helps.
Method 1:
You can also perform a clean boot and check if it helps.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: Make sure that you put the computer to a Normal startup once you are finished.
Method 2:
You can also check in Event Viewer about what is causing the problem. Alternatively, you can publish the results, so that we can help you solve the problem.
What are the information contained in the logs of the event (Event Viewer)
-
I did several back ups on my computer and I wonder how many of the discs that I have to hold. Can I get rid of all except the last backup?
Thank you
Scott
Hi Scott,.
You must keep all 10 backup.the disk new backups will contain only the last backups and will not have the previous backups.
-
original title: safe mode
my laptop is insafe mode and now my screen is huge, and I have no sound while it is in this mode... How do you turn off safe mode?
Hello
audio drivers are not loaded in Mode safe
read this to get out of Safe Mode:
- Close all running programs and open the windows if you are back on the desktop.
- Click on the Start () button.
- In the search box of the Start Menu () type msconfig and press enter on your keyboard - follow UAC prompt.
- The System Configuration utility opens
- Make sure the Normal startup is selected
- then click on the STARTUP tab at the top
- Make sure that the startup is disabled
- Apply - OK - then follow restart guests
-
I have created a VPN connection and it worked but you can't see how to remove Windows 7.
Delete the VPN connection
I have created a VPN connection and it worked but you can't see how to remove Windows 7. I tried rt-click but no delete option.Open network and sharing Center. On the left side, click on change adapter settings. You will get all VPN connections that have been created and you can delete what you don't need.
Maybe you are looking for
-
Install Windows recovery disk 8 in virtualbox hangs on the splash screen
Hello Lenovo community, When I try to install the copy of Windows 8 I got with my Lenovo S440 in a virtual machine environment the installation hangs on windows startup screen. I've never seen a Windows 8 installation procedure before, so I booted my
-
Setup.exe does not properly
I'm trying to upgrade to Windows 7, and at one point in the configuration of several programs are listed to be uninstalled, when it gets to the Realtek USB 2.0 card reader a pop window that says setup.exe does not properly. Cannot uninstall in Contr
-
Problem with MG7550 new in Win 8.1 banding
Hello I run tests on a Pixma MG7550 new printing, but I'm a uniform of the vertical stripes on the photograph of landscape prints (i.e. horizontal stripes on portrait prints). It is really noticeable on gradients, but is it whatever the color. It l
-
When I try to access my Windows Media Center Live TV, I get an error message indicating "video decoder is not installed or with malfunction." Is this a problem hardware or software, and in both cases, how to fix? I alsow get a message that says: Mess
-
Menu start no longer displays options to shut down the computer, someone knows how to change that? The power options menu did not help.