I have a prob with my windows update... some of them not yet... install the error code is the window update 646.can u help give solution for me please? Thank you appreciate

Similar Questions

• Unable to install printer, can not find the folder c:\windows\system32\drivers can anyone help im new to computers. Thank you

  nothing other than follow install wizard interrupted because usbprint.sys msg

  All of the C:\WINDOWS\system32\drivers folder is missing?  If this is the case, I don't know how your system boots.  Otherwise, look for usbprint.sys in C:\WINDOWS\system32\ServicePackFiles\i386 if you are running an Intel-based system.  Look in \amd64 so it's an AMD based system.  You can also find it in C:\WINDOWS\system32\dllcache.

  The easiest way is to copy (but you will have to do it in safe mode).

  The best way is to use the System File Checker (SFC) by using the "sfc/scannow" command from the run (start-R) menu.  Note that this requires that you have your Windows XP installation CD and the CD for your current Service Pack level.  Note that you might have trouble with the Service Pack CD-ROM will be accepted.  Read KB900910 if this is the case (http://support.microsoft.com/kb/900910 ).  This procedure should work for Service Pack 3, too.  (I think that the biggest problem with the CD of Service Pack incompatibility is that Windows Update installs a multi-language version, while most of the CD are unilingual and therefore have different product IDS.)

  Vote if this is useful.  Click on brand or propose as answer if this answers your question.

• of the Assembly's strong name validation failed "c:\windows\ehome\ehshell.exr". The file may have been tampered with or it was partially signed but not totally witht the

  media center ehshell.exe received the error message 205 units

  of the Assembly's strong name validation failed "c:\windows\ehome\ehshell.exr". The file may have been tampered with or has been partially registered, but not totally witht the private key

  After you have installed the XP SP3.

  How can I fix this error.

  Media Center worked fine until I installed SP3.

  Hello

  I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

  Ehshell.exe is a Windows system file that is used to run Microsoft Media Center. It is not a critical system file. However, the ehshell.exe file can become infected and cause errors trying to run certain programs. If the ehshell.exe is absent, it can also cause errors. Reinstall a clean copy of ehshell.exe with the Microsoft System Restore.

  (a) click on the "Start" menu, then click on "programs". Scroll down and click on "Accessories," then "system tools." Click "System Restore."

  (b) click on 'Next' in the system restore window to view a list of points of restoration which has been archived.

  (c) select a restore point created before the ehshell.exe file becomes corrupt or got deleted. If no restore point until this time is listed, click on "Show restore points more" to select the one that is before this date. Click 'Next' to choose which restore point.

  (d) click on 'Finish' to start the system restore. The computer will restart once the process is complete and the ehshell.exe file is reinstalled.

  If the problem persists, follow these steps:

  You try to run the following commands to re-register all Media Center services:

  (a) close Media Center

  (b) click on the start menu, choose run and type cmd , and then press ENTER.

  (c) in the command prompt, run the following commands to type (or copy/paste) the one at a time and press on enter:

  · Regsvr32.exe atl.dl

  · C:\WINDOWS\eHome\ehl Sched /unregServer

  · C:\WINDOWS\eHome\ehSched/service

  · C:\WINDOWS\eHome\ehRecvr /unregServer

  · C:\WINDOWS\eHome\ehRecvr/service

  · C:\WINDOWS\eHome\ehRec.exe /unregServer

  · C:\WINDOWS\eHome\ehRec.exe/regserver

  · C:\WINDOWS\eHome\ehmsas.exe /unregServer

  · C:\WINDOWS\eHome\ehmsas.exe/regserver

  · Restart the Media Center

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• I have a partitura with 18 instruments. Problem is that only 16 of the sheed. How can I vertically down the music?

  I have a partitura with 18 instruments. Problem is that only 16 of the sheed. How can I vertically down the music?

  Make a score set with 18 all instruments. Then use the scale parameter set score to all fit on a single page.

• I have a monitor with a resolution of 1366 x 768, when I install the CC 2015 Adobe, adobe is the resolution recommended at 1440 x 900, y at - it all the parameters that can match their set so the display can look good?

  I have a monitor with a resolution of 1366 x 768, when I install the CC 2015 Adobe, adobe is the recommended resolution of 1440 x 900, y at - it all the parameters that can match their set so the display can look good?

  Hey Boi,

  Please refer to the system requirements | Adobe Creative Cloud

  Hope that helps!

  Kind regards

  Sheena

• Windows 7. But the name of the account user each time before fully loading windows. How can I stop this and simply load in thank you Windows.

  I have just upgraded to Windows 7. But whenever I turn on my computer, he wants to support me on my user account name before completely loading windows. How can I stop this and simply load in thank you Windows.

  Hi UKuser7,

  Welcome to Microsoft Answers Forum.

  Automatic logon is disabled in Windows 7 by default for security reasons. If it is enabled, anyone who can physically access the computer can also gain access to everything on the computer, including the networks that it is connected.

  This setting is only recommended for cases where the computer is physically secure.

  To set up Windows 7 to connect to the desktop automatically, follow the steps below.

  1) click Start , and then enter the following command in the start search box:

  Netplwiz

  2) press ENTER.

  This opens the Advanced user accounts Control Panel window.

  (3) in the users tab, uncheck the box next to users must enter a user name and password to use this computer.

  4) click apply at the bottom of the user accounts window.

  (5) when the newspaper automatically on the dialog box appears, enter the user name for which you want to automatically connect to Windows 7. Then enter your password in the two areas where it is requested.

  6) click on the OK button.

  7) click OK in the window user accounts to complete the process.

  Thereafter, your PC at startup, Windows 7 will be automatically connect.

  Ticket back for your comments and concerns.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• Hi I find a problem with my iPad... I delete almost everything about him and he always tells me almost full storage! can someone help me on this problem pls thank you

  Hi I find a problem with my iPad 2 Air... I delete almost everything about him and he always tells me almost full storage! can someone help me on this problem pls thank you

  Hello

  Try a reboot press & hold the power button / stop & menu button

  Hold both down until you see the Apple logo.

  What is your ipad 16g / 32g or higher?

  See you soon

  Brian

• Windows updates will not be installed. Error code 646

  I try to install my updates. and it goes through the motions and falls down and gives me the error code 646.

  Can someone give me some tips?

  Error 646 when installing updates.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232b

  You receive the error code 0 x 80070646 or 646 error code when you try to install Microsoft Office updates
  http://support.Microsoft.com/kb/2258121
  "That's all a pension chequer nights and days,"
  Where destiny with men for pieces plays;
  Here and there, mates and kills.

  In a world without walls and fences, who needs windows and doors? Life sucks! Getting used to!

• I have two probs with download of updates on my windows 7 do not install 80073712 and 64 c How can I fix this__Thomas turton

  two probs on downloading update 80073712 and 64 c

  The "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive the "0 x 80073712" error code when you try to use Windows Update
  http://support.Microsoft.com/kb/931712 TaurArian [MVP] 2005-2011 - Update Services

• Some 100 updates have not been installed. Error code 80248007

  While trying to install updates from Microsoft, has received the following message, "some updates were not installed, did not 100 updates. Error code 80248007. Unfortunately, there is no reference to this code in the HELP section.

  Hello

  Error code when you try to use Windows Update or Microsoft Update to install updates: "0 X 80248007".

  http://support.Microsoft.com/kb/958046

• I use windows vista x 64 and whenever I try to update definitions for windows defender error code 0 x 80240022. Any ideas on how to solve this problem? Thank you

  Windows vista sp2 64-bit
  Windows defender error code 0 x 80240022.
  Also, I read the bandages and still cannot find a solution.

  Hi Mark

  You can try to manually download the update of windows Defender by going in the following website http://support.microsoft.com/kb/923159 and throguh read the statement if you are having trouble, please contact 866-727-2338 for the USA and UK PC security please dial 0844-800-2400 and if not try to go on the site Web create a case and mention details such as the delivers name and name , contact the number and that the concern team can help you and the link is https://consumersecuritysupport.microsoft.com/default.aspx?altbrand=true

  Concerning

  Paul

• Hi, I bought CS6.0 Design and Premium comes with my laptop. I have not yet installed the software and now I can't find my CD can I know how to get my copy replaced?

  Hello

  I bought a laptop in 2013 and it came bundled with a CS6.0 Design and Premium, I have not installed the CS6 on my laptop. Now when I tried to install it, I can't find the package.

  May I know if there is a way I can get a replacement CD?

  Hello

  The installation files are available here: https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  Thank you

  Bev

• Equipped with Vista 32-bit, lost sound and cannot install the Realtek-get code 800705 b 4, can anyone help, BB _ @_. _, Thank you

  Equipped with Vista 32-bit, lost sound and cannot install the Realtek-get code 800705 b 4, can anyone help, BB * address email is removed from the privacy *, thank you

  How does this relate to the features of Windows Update?

• Hi guys, having problems installing adobe photoshop 11 (with or without activated antivirus) elements but able to read any other DVD and CD. Can anyone help? See more details. Thank you.

  Hi guys, having problems installing adobe photoshop 11 (with or without activated antivirus) elements but able to read any other DVDs and CDs. error message: Error 1935. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista and the DVD is to this system.

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you have problems with a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• Problems of Smartphones blackBerry with BBM groups if some members are not put to the last version of Messenger

  I have a BBM group with 10 friends in there.  A few days after that I've upgraded to the newest Messenger, one of the members of the group cannot see me in the chat.  I can see it, everyone can see the two of us, but I am appear too small on her screen group.  We can BBM each other normally... just not within the group.  Has anyone encountered this?  Is it possible that the problem is that our versions of Messenger no longer compatible for groups?

  Note: it has to upgrade its Messenger to the current version... and everything is back to normal!  Just in case someone else falls on this same problem!