I have a problem with the installation of service pack 1

Similar Questions

• Vista - problem with the installation of Service Pack 2

  During the installation of sp2 for vista 32-bit I'm having the following problem: he is stuck on configuring updates: stage 3 of 3-0% conplète computer restarts poster above restarts again and again, and again, please help!

  http://support.Microsoft.com/kb/949358>

  http://support.Microsoft.com/kb/2438651/en-us>

• Problem with the installation of Service Pack 2 for Windows Vista. 8024200d error code.

  I have made several attempts unsuccessfully to update my vista using the automatic update for service pack 2, but I always "update has not 8024200d error number". I tried a start-up in minimal mode, but automatic update does not appear. I reached my intellectual limits. What means exactly the error 8024200d mean?

  How do I beat successfully automatically update?
  F....

  Hi Mubarak,

  Can you please tell me the number of KB article of updated with the question?

  Take a look at the response from here-

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/i-am-getting-error-code-8024200d-when-trying-to/b0ae43eb-8e84-4a71-94af-75318c984d45

  Thank you.

• Problem with the installation of service pack 1.

  First - thanks to Bill Smithers for your answer.

  My problem is the following: -.

  Windows has downloaded about six copies of sp1 and always asks me to install another copy!

  Whenever I go to 'update' he asks me to install another copy!

  When I tried to download the sp2 it says I need sp1 must be installed first! But my page update says that it was properly installed.

  Do I need to uninstall SP1 multiple copies? and start again?

  I use Vista home Premium 32 bit and make me a little frustrated to say the least of it.

  I need of sp1 and sp2 for some programs to work. Help!

  Best regards, David

  I had exactly the same problem and it seems to have other, judging by the number of threads on this topic.

  Yesterday, a response to a thread suggested a hyperlink through the Windows Download Center. I tried and for some inexplicable reason, it worked. I have now installed SP1. It shows in my system tray and is no longer updated tells me to install it. The hyperlink is http / / www.microsoft.com/en-us/download/details.aspx?id=910

  Worth a try.

  My next challenge is to install SP2!

• I have a problem with the installation of ADOBE ILLUSTRATOR using creative cloud. It gives me:

  I have a problem with the installation of ADOBE ILLUSTRATOR using creative cloud. It gives me:

  Exit code: 117

  -------------------------------------- Summary --------------------------------------

  -fatal error 2, 0 error (s), 0 warning (s)

  FATAL: Fatal Error ' 117' occurred in download

  FATAL: An error has occurred in the download package (name: AdobeIllustrator19-Core Version: 19.2.0.111). Error code: '117'

  -------------------------------------------------------------------------------------

  N ° 1)

  Click on the below link, Sign In and open Photoshop Elements download link.

  Do not close the page, just keep it open.

  https://www.Adobe.com/cfusion/TDRC/index.cfm?product=photoshop_elements

  Note: * If we do not keep the page of items in Photoshop, we will have access denied error message when file downloading install direct.

  Then click on the link below and download the installer directly mentioned in step 2.

  Step 2)

  
  

  http://prodesigntools.com/trials3/AdobeProducts/ILST/19/Win64/Illustrator_19_LS20_win64.7z

  Step 3)

  Unzip the installer using 7zip or winrar and then install the product.

• Hello I have a problem with the installation of Adobe Photoshop elements 13!

  Hello I have a problem with the installation of Adobe Photoshop!

  Le instalationsprogramm va on I can also enter the key but after 2% left the program.

  Can you help me?

  Run the vacuum cleaner by the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  you restart the computer

  and run the Setup again.

  If it fails again during installation, troubleshooting install using newspapers | Elements

• I have windows xp after the installation of service pack 3 I can only start in safe mode

  I have windows XP after the installation of service pack 3 I can only start in safe mode?

  Hello

  ·         You get the error message?

  ·         What happens when you try to start in normal mode?

  Method 1

  Windows XP can in every start Safe Mode by default. Even if you select the option Start Windows normally, it always starts in Mode without failure. IOW, you can't get out of safe mode.

  This happens if the switch/SafeBoot is added to the Boot.ini file. / SafeBoot parameter forces a boot in safe mode by using the specified parameters. The available parameters are:

  (a) minimal (b) network (c) safeboot: minimal (alternateshell) For more information about the boot.ini switches, see visualization and correction of the settings of the boot on x 86 systems RESOLUTION (a) click Start, run and type MSCONFIG (b) click the Boot.ini tab (c) If you have a dual-boot system, select the entry that is appropriate under the [operating systems] (d) in section downstairs, Startup Options uncheck / hisFEBOOT (e) click OK (f) restart Windows The entry/SafeBoot are removed from the Boot.ini file.

  Method 2:

  If the above method is not the cause, it seems that Service Pack 3 is not installed correctly.

  Step 1: You try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Step 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  Note: System requirements to install Windows XP SP3

  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

• Have a problem with the installation of CF9

  Hello

  I try to install CF9 on my computer, but I have a problem, once the installation is complete and he gets to the part administrator and Migration (the part where it opens a browser). I enter the admin password, and then click ok, then he's going to the page that says that the server is configured. There is a note that says that it can take a few minutes, but after a wait of 10-15, I get a time-out error that says that demand is greater than the permitted time limit. I don't know what to do at this point. I tried reinstalling and changing installation options, but nothing works.

  On a note separated, once the installation is complete, I get a Jrun4 process in Windows Task Manager and it completely my computers memory hogs. After a few minutes, it will use about 500 MB of memory and the computer is unusable because of how long it takes to respond to each click.

  Help, please!

  Here are the stats from my computer:

  (Filled all the requirements of system)

  Windows Vista Edition Home Premium

  AMD Athlon (TM) 64 X 2 Dual - Core TK-57 1.9 GHz processor

  959 MB OF RAM

  32 - bit operating system

  My default browser is Google Chrome and it's what he uses when it goes through this problem. I tried manually run the link administrator with IE and firefox and I get the same problems.

  My computer is a HP Compaq Presario F700 laptop and its about 2 years while working well, maybe it's just not up to running CF9?

  Thanks for any help,

  Alex

  I've never used this cfstart.bat file to start CF.  The process to install a Windows Service must have been created: use it.  I don't know if it makes a difference, but through a shell you do in CF cfstart.bat may not be a perfect way of doing things.

  The CF error you get just means that CF is pulling the plug on your request because it takes so long.  I think that, by default, there is a 60 sec timeout.  I've never seen CFAdmin take 60-sec to boot.  This setting is usually configured via CFAdmin and not sure where to turn off if this same setting prevents a bet in CFAdmin.  I'll have a look later... time for me to jump on a bandwagon.

  Maybe put your Xmx set back up to at least 256 MB.  To save a little bit more RAM, you could probably reduce your - XX: MaxPermSize to the low a little too (maybe up to 64 MB?  Not sure about that).

  Your PC seems to be quite tight on resources, if you need to do this kind of thing, btw.  I note that you use only 1 GB of RAM on a Vista machine.  EEEK.  I wouldn't anything less than 2 GB (and would prefer 4 GB while she performance).  Your question may that Windows is having to share a RAM disk too, which will slow down everything until analysis.  Which seems to be what you feel.  Windows itself needs... what... about 400 MB to run these days, before you start trying to assign any what RAM in other applications.  1 GB is not enough.

  --

  Adam

• Is there a problem with the slice of Service Pack 2 for Windows Vista?

  I had to reinstall Windows Vista Unlimited twice already.  This is because the installation of Service Pack 2 for Windows Vista.  I had everything, including Internet Explorer 8 is installed during the installation of the Service Pack 2 has crashed my computer, and I had to re - install.

  Hello

  Please read: information about Service Pack 2 for Windows Vista and Windows Server 2008
  Includes installation tips and Microsoft Support.

  Also Please read: "How TO solve IE8 installation problems"
  Includes installation tips and Microsoft Support.

  Hope this helps, Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop experience & Security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• I'm having a problem with the windows vista service Pack 1 download and installation.

  KB936330

  The error Code is 800F081F
  Code 800F081F
  When I run windows update as it says it's a pack recommended important I need, and then when I try to download and install it won't get this error just keeps popping up. Also, saying: unknown error.

  If someone please tell me the solution?

  Hi Berto5097,

  Thank you for using Microsoft Vista answers Forum!

  The following are possible causes of this problem:

  ·         A program on your computer interfered with the installation of the service pack.

  ·         There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

  Take a look at the article, follow the steps from there to solve this problem

  http://support.Microsoft.com/kb/947366

  If please reply and let us know if your problem is resolved or if you need more help

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• I have a problem with the installation of the drivers for the Belkin card.

  Hello

  I just bought a new Belikin N150 USB Wifi Adapter. I went through the installation disc and all except that tooth was installing the drivers. I tried to install the drivers, and it gave me this error. Help, please! I am also on an Administrater account

  

  ~ Matt

  Hello Matt,

  Thanks for posting your query on Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. You are able to install other software/drivers without any problem?
  2. You have security software installed on your computer?

  Try it out below mentioned methods and check if it helps.

  Method 1

  I suggest you to disable the temporary security on the system software and check if it helps.

   

  Disable the antivirus 

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Method 2

  Note:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

  This error can occur due to permission problem in the registry for the USB controllers. I recommend that you take the permission to the registry editor USB. To do so follow the steps below.

  • Run regedit from the Start menu. Be sure to export a backup copy of the registry before continuing.
  • Browse to the location:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ENUM\USB

  • Right click on the USB folder and select permissions...
  • In the dialog box, make sure everyone is a listed group and that the reading is checked.
  • Click the Advanced tab and make sure that include the permissions that can be inherited from the parent of this object is selected, as shown.

  

  • Go to the owner tab and be sure to replace the owner of subcontainers and objects is selected as shown.

  

  • Select Apply to apply these changes. A warning message may appear at this stage. Select OK to continue.
  • If necessary permissions for USB dialog box select , and then click OK to exit.

  Feel free to post them here if you need further assistance.

  Thank you.

• Equium P200-1ED - have a problem with the installation of driver VGA

  Hello

  I have problem with installing driver vga video, every time in installion on that he stops

  Version: 6,14.10,4833 and it has error poping up...

  Help, please!

  What kind of error?
  Have you installed the chipset utility first?
  What version of Windows XP Home edition, you have installed? SP3 maybe?

• I have a problem with the installation of internet explorer 8

  I tried to open the IE 8 installation and he said this thing:

  The Setup program could not verify the integrity of files needed for the installation. Make sure the cryptographic service is running on this computer.

  I checked the cryptographic service and it says it works... so I don't know what to do
  Please help me!

  By the way, I have windows XP

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.InternetExplorer.General&cat=en_us_28cca3eb-7037-4D4F-bde1-d8efee1f1420&lang=en&CR=us

  Internet Explorer discussion above for your problems of IE8.
  This is the right place to ask your question of IE8.
  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

  Above is the link for the XP Newsgroups.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.windowsupdate&cat=en_us_d99bb655-a5d5-4C07-bdb0-90caf9f30c42&lang=en&CR=us

  And Windows Update discussion group if you need.

  Here is the Vista Forums.

  See you soon. Mick Murphy - Microsoft partner

• Hey there, I have a problem with the installation of all programs!

  Hey there,

  If I try to install any program I get an erorr: Installerorr to 42%

  now, I don't hat to.

  Please read and reply here with the https://forums.adobe.com/thread/1499014 information

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I have a problem with the installation of FSX on an external hard drive.

  I want to put Microsoft FSX upward on an external hard drive (1.5 terabyte) but during the installation I don't see an option to install on a drive other C: I am given this option in installation?  I have Windows 7, 64 bit.

  Thank you

  hocdaddy

  Hello

  Please contact the Microsoft Community.

  I'd contact Flight Simulator in favor new assitance.

  http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

  In addition, you can also publish this query in their community as well-

  http://www.Microsoft.com/products/games/FSInsider/community/pages/default.aspx

  Let us know if you have other questions about Windows in the future.