I have a signed bar file, what do I do next?

Similar Questions

• After reset FF I have an old FF file, what do I do with him?

  My FF icon began to show a blank page when I click on it. I could of course click on my home page after the fact, but not what I want. So I re-set afterwords FF there is a 'old FF data' folder on my desktop. What is this for? what I do with it? can I use it for my homepage exactly as it was before the back? How?

  Thank you
  Ron

  Data recovery from the old data of Firefox folder is a little complicated because file and folder names are often obscure.

  On your home page, you use a custom page online (like the old iGoogle) that you can easily reconnect to the, or you use an add-on that locally stored page layout? If they were only stored locally, there are a few different scenarios to recover your data, but the details depend on which module it was.

• Signed bar removed as soon as it is generated

  There the first time I have seen this, the signing process is going through, I see the message 'WebWorks application packaging', then signed bar file is deleted.

  Signature must be silently failing because it is not to complain about numbers being the same.

  Is the deletion part form any mechanism of protection that was triggered?

  It was a firewall issue. I always find it strange that bbwp is a not complain about anything whatsoever, because as soon as the application has been in the whitelist, bbwp worked as usual, warning already signed, files, etc.

• Remove the bar file final debugging information

  Hi all

  I signed my application and follow the GUI procedure provided by RIM to do. But my final signed .bar file contains only 1 file but if I understand many different reading positions it must be 5. A lot of people have said adding - debug = false to my compiler argument will fix my prob. The thing is that I don't know how to add - debug = false to my compiler. I would really appreciate if someone could give me a walkthrough on how to do it. BTW I use windows XP and Flash generator burrito.

  Thank you.

  Do you have a blackberry - tablet.xml file created with the same Publisher name exactly as the name that you used when you registered for your signing keys? To add the compiler argument you can right click on your project in the Explorer window, and then click Properties. In properties, there is an option on the left that says something with 'compiler' in there. In this section that see you a box of text at the bottom just add - debug = false, while leaving all the rest in the same box.

• Unable to connect BAR file "error: Code signing request failed because it cannot be recorded.»

  Hello

  I'm trying to sign the BAR file generated from the apk files, but I got this error:

  Error: Code signing request has failed because it cannot be recorded. Package-Version-Id [gYACgLU-GLg8YtNMuWU17-BoxsM], [gYAEgM4XsG9ppojbj3zOO9gg-Nc], Id [2189468] Client Application-Version-Id.

  I tried to redownlowd the file CSK again and again, did a lot of things but not luck.

  Thank you for sending via manifest file.  The error is caused by the name of the application you are using.  There is a limitation of the number of characters that can be used for an application name.  The number of characters will vary according to the type of encoding used, in this case it would be 7.

  The workaround for this solution, use our tool is to define an application name by default using Latin based on characters and then add names localized for each supported language.  These localized names do not have this limit.  For comparison, here's how it's done using BlackBerry Momentics: How to define an Application as the characters name Unicode requires the default name would only be used if a localized name is not available for the language of the user.

  Android also supports localized names of applications, so the similar process should work there too.

• I just paid for 2 licenses and adobe said I do not have a license on file for one, what "bad?

  I just paid for a 2015 Adobe first CC license for $19.99 a month, I did the same thing for Adobe Photoshop.  However, when I try to open one of these specific applications, the screen tells me that I have no license on file for those two Apps (they are the only two I have initially).  I paid for both of them with flow using what money I had left on my account.  Is there a way I can check my purchase history.  @Please someone tell me that I did not just get out on about $42.00 jipped.

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• I have a list of add-on Supplement (MeasureIt). But I would have on Extensions bar because it is very useful for me. What should I do?

  I wish the complement of MeasureIt stay in the Extension bar. What should I do?
  Thank you very much
  E. Tavora

  Moderator published on email = private information

  http://www.MakeUseOf.com/dir/MeasureIt-simple-ruler-extension-Firefox/

  "Button" is assumed to be in the bar the add-on / status bar, by the screenshot on this page, I posted below.
  You have the module bar / Statusbar hidden?
  
  {Ctrl + /} will display the status bar

  In addition, based on this review the 'button' can be moved using customize.
  
  Right-click the status bar (now called the module bar and drag this button to another toolbar.

  And if this button is not sitting on the status bar, open customize and drag the 'button' to the location you want on a toolbar.

  IMO, the developer of this add-on should provide the instructions on the download page, especially if this "button" starts in the Palette to customize and is not in the bar Statusbar/add on by default. I don't know, I tried to use the module twice over the years and had problems with it each time. Have not used for quite some time, now.

• I have a bunch of files cloned what type of files r OK to remove without harming the computer

  I have a bunch of files copied on my laptop, but im afraid to remove any can someone tell me what file types and or extenstions can be removed without messing up the computer until I throw it out the window!   It's an indpiron dell 8600 if that helps any

  Hello

  · Where are these files?

  · What to read these files?

  · What the extension to these files?

  · Do you remember any changes made on the computer before the show?

  I suggest to run the disk cleanup utility, you can check the link below for the procedure on the same: Description of the tool in Windows XP Disk Cleanup: http://support.microsoft.com/kb/310312

• I have windows vista and when I click on a shortcut on the desktop I have a pop up asking what file to open it with. In order to open the file I find the actuall file.

  Original title: registry exe problem

  I have windows vista and when I click on a shortcut on the desktop I have a pop up asking what file to open it with. In order to open the file I find the actuall file. This also occurs when you download the software, which makes it difficult, because the file is not on the pc yet. All solutions?

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  I hope this helps. Good luck.

• "Can not open AsIO.sys (2)" I get this message when I log in after a reboot. I have search for the file, but can't find it with the research or the command prompt. What do do in this file, and can be created and put into the appropriate folder?

  "Can not open AsIO.sys (2)" I get this message when I log in after a reboot.  I have search for the file, but can't find it with the research or the command prompt.  What do do in this file, and can be created and put into the appropriate folder?

  Hi Jack,

  This driver belongs to AsIO.sys Asus Probe. Try to uninstall Asus Probe and if you need, install again. If this does not help, uninstall Asus Probe and other tools of control such as Speedfan. Open the registry (regedit.exe) editor and search for AsIO.sys and remove all the entries that you can find.

  André
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How to sign a file .bar via command or native_qnx_momentics_IDE?

  On the development of AIR SDK to sign a key for the .bar file

  BlackBerry-sign-verbose - cskpass - keystore author.p12 - storepass specific_file.bar RDK

  BlackBerry-sign - keystore author.p12 - storepass specific_file.bar author

  Problem:

  After using the same commands for the native SDK .bar file. RDK files cannot be generated.

  P. S.

  .bar file is generated via QNX_momentics_IDE/export/construction realese.

  Does anyone know how to sign a key on the native SDK application .bar file?

  Thank you for your attention.

  Hmm. signature air tools are exactly the same, if you register in the air - try to use the same lines of command (from the installation of air)

  (a) release of the IDE to export, but uncheck signature

  (b) sign of command line

• I have 38,000 double-files.do, I have to go through all and decide which keep do I take my PC to have cleaned teacher? What are my options?

  I have more 38 000 files duplicated in my PC. I have to go through everyone and decide which to keep? What should I take my PC to get it cleaned up prof.?  What are my options. This is second hand PC that I thought was cleaned whenever I bought

  Seriously, my best advice when dealing with a used computer is to wipe the system settings of the factory and to start with something that you can call your own. You do not know to what extent the configuration of the machine has been "customized" and the large number of duplicate files is indicative of problems in the system.

  Prior to the relocation of factory default, you can use a free program like BelArc Advisor or SiSoft Sandra on the computer. Each of these lists several factors of the computer configuration, including software installed and associated with product keys. If you're feeling particularly playful mood, Magical Jelly Bean Keyfinder is another option. A case like this can be valuable during a clean installation.

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• What is the maximum size of a .bar file?

  Then. What size can be a .bar file in the app store? THX.

  Found:

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/the-maximum-size-of-a-BlackBerry-table...

• Quick question: is it possible to tell if a .bar file is signed?

  Sorry if this has already been asked to answer.  I couldn't find anything in the search.

  Is there a way to tell if a bar file is signed?  I know that you can extract the file bar and display the content of it, so is there files in there that I could look and see if he is signed or not?

  Hey,.

  This post from peter in another thread should be able to help with this:

  http://supportforums.BlackBerry.com/T5/Tablet-OS-SDK-for-Adobe-Air/howto-sign-your-applications-from...

  Good luck!